• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2011

The information of the IT convergence has extended through the whole business ares with supplying intelligence terminal such as smart phone and the technology of sensors and wireless networks. And also, the existed industry became to high technology and extended various parts. The industry of the elevator became the center of the life offering the diversification of the user environment access and high building control. In this paper, we suggest the elevator control system integrated wire and wireless based on Information technology. We suggest the service model of user friendly connected by internet. For this, we make the relation model of the elevator system and IT environments and then design the service model for wire service and wireless service using smart phone. It can make to supply efficient information with wire and wireless environments and also make improvement in accessability for the disabled peoples.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.308-310
• /
• 1995

Most of the elevator door controllers have been controlled by DC Motors as an actuator. Recently, The control system using AC induction motor and general purpose inverter has been applied to control of elevator door. But there are some difficulties in making use of this system, such as adjustment of door speed pattern, door open-close time, and security of passenger safety. In order to solve these problems, a special inverter has, been developed with an encoder feedback. From the result of field-test, we proved that a special inverter with encoder feedback device has come to considerable effect. Until now about 1,200 sets of these inverters are operated in Korea and about 100 sets are operated in South-east Asia.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.488-493
• /
• 2001

In accordance with the tendance to construct high-rise apartment buildings, the transporting elevators tend to speed up to 90-105m／min and to drive more frequently. So, the problem of noise produced by the elevator operation has been treated as an important subject. In this research, the actual conditions of noise and vibration which generated and transmitted by the elevator operation in apartment buildings were measured and analysed. And the several noise and vibration control design which helps reduce noise were examined.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.159-162
• /
• 2014

Recently, from 2008 to 2012, there are many of elevator safety patents from patent office survey. In this paper, we analyzed the elevator safety patent from 2009 to 2013, found out safety factor is safety control, emergency stop equipment and door opening equipment. Through reliability statistics, we defined the most important things for safety elevator factor is this three things, studied the reason about many patents. Finally, we propose the Kinect Scada elevator system for prevention safety accident.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2588-2595
• /
• 2013

In a traditional hydraulic elevator, elevator car is descended by down control valve, and the oil hydraulic energy must be lost during the descending stroke. In this paper, the performance characteristics of the hybrid type energy saving unit, is used to save the hydraulic energy which is lost during the descending stroke, for a hydraulic elevator are studied. The energy can be reused as the auxiliary power. The results show that the performance characteristics, such as the pressure, flow rate, output current and voltage, efficiency, and the energy recovery rate of the unit are stable and good as the energy recovery rate is 54%, and the energy saving unit is useful to reuse the saved energy during the descending stroke of elevator car. Also, it was confirmed that the energy saving unit can be deployed on a commercial scale.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.785-791
• /
• 2013

Recently, Elevator industry is pursuing new challenges to the model of the IT convergence. The core of the convergence technologies may be the effective control and maintenance of the machine. However, because current elevator management model provides each specific model for his elevator, the management models have a variety of heterogeneous configuration so that it makes management companies to manage the elevators with many overhead. In this paper, we propose the integration framework for the various elevator models. We use proposed system based on the Android framework that is rapidly expanding technology in the embedded environment, and we propose design approach for the integration of variety of lift devices so that it provide a more efficient and stable service environment. In this way, we could integrate various device models of an elevator for the management and maintenance effectively and quickly.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1215-1217
• /
• 1992

This Paper described the hish performance position control for elevator using induction motor and driver. In this paper, the suitable Motor specifications for elevator drive are briefly discussed and high accuracy position control for both kinds of control method is analysed considering the parameter variation in the primary and secondary resistances. Since the pre-identified values of the motor constants are used to determine the control inputs, the performance degradation is caused by the parameter variation such as in the motor resistance. Particularly, the value of secondary resistance is considered significant because the control gain to determine the slip frequency is heavily dependent on that. The new proposed method uses on special small input signal for the parameter indentification and is expected to have the high accuracy position.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.159-162
• /
• 2004

This paper is a study the instructional medium application for increasing the understanding of the motor control and automatic operation design course using the elevator model.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.155-161
• /
• 2023

In this paper, we present a WebRTC-based emergency video call system structure that builds a service system in a constant monitoring environment to increase the usability and stability of elevator emergency call devices. The proposed system provides a smooth call environment between the emergency call system in the elevator and maintenance managers in case of an emergency, performs rapid response processing to elevator emergency calls through monitoring of the target elevator, and handles any emergency calls that may occur in the physical space of the elevator. The purpose is to build an environment that can implement low-latency, real-time video call services of voice and video by overcoming the physical constraints required for video calls. To this end, we have established a service environment based on OpenAPI, which is currently used in various fields and its performance has been proven, and provides video calls and emergency situation dissemination through rapid messaging by providing low-latency call quality. The presented system structure will be able to provide a basis for expanding various functions and constructing a reliable service environment and intelligent model for the elevator system through combination with the elevator control panel and various devices.