• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.191-198
• /
• 2013

Geo-pointing is a function that maintains LOS(Line of Sight) to a stationary ground target by controlling azimuth and elevation angles of a EOS(Electro-Optical System) which are calculated from aircraft navigation data and target coordinates. In design and implementation of the geo-pointing, a transmission time delay between GPS/INS and EOS is a major degradation factor of the geo-pointing performance when the aircraft is rapidly maneuvered especially. In this paper, a kalman filter is designed to compensate the transmission time delay of aircraft navigation data. Simulation and test results show that the geo-pointing performance is enhanced by the proposed compensation technique.

• 한국농촌건축학회논문집
• /
• 제5권1호
• /
• pp.42-61
• /
• 2003

The purpose of this study was to analyze the characteristics of wooden anglican church architecture in Chungcheong area. For this study, I have selected ten anglican churches, and have studied the characteristic through the actual survey and analysis. This study focuses on the architectural characteristics and evolution of wooden anglican church in chungcheong area, based on the actual survey and historical analysis. The results of this study is as follows:1)The shape of plan is long axis composed of the entry and altar. 2)The shape of elevation is composed of the roof form and existence and nonexistence of bell-tower. 3)The shape of section in divided into one kan and three kan way, by the existence and nonexistence of a row of columns in the interior. 4)The structure and design follows roof-framing.

• Journal of electromagnetic engineering and science
• /
• 제5권2호
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• 오토저널
• /
• 제15권3호
• /
• pp.111-119
• /
• 1993

In this study, the transient impact structural stress analysis of tracked vehicle structures under recoil impact load is investigated. ANSYS, ABAQUS Code are used for modelling and analytical procedures. The highest maximum Tresca stress occurs on race ring portion and its stress level is (.sigma.$_{T}$)$_{max}$ =20-40kgf/m $m^{2}$. The second highest stress occurs on upper plate of chassis and down plate of turret. The maximum stress level increases with loading direction and elevation angle. The results from liner static load analysis are very much different with impact analysis. Therefore, the practical solutions of structures under impact load can be obtained by only nonlinear transient impact analysis. The impact stress analysis of the steel vehicle structures is conducted. The maximum stress level is less than (.sigma.$_T/)$_{max}$m $m^{2}$. So, the design concept of steel structures can be adapted for new alternatives.s.s.s..s.

• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.750-759
• /
• 2009

FLIR(Forward Looking Infrared) geo-pointing is a function that helps pilots to see a target within the field of view under all coordinates and attitudes of helicopter. Geo-pointing controls FLIR LOS(line of sight) toward known target coordinates by using azimuth and elevation angles calculated from several information such as helicopter coordinates and attitudes, a FLIR position from a GPS antenna, and target coordinates. Geo-pointing performance has been tested and evaluated on the ground to save flight test costs and ensure flight safety. In this paper, design and implementation of a geo-pointing system is described with the results of performance test conducted on the ground test system.

• 한국주거학회논문집
• /
• 제15권4호
• /
• pp.107-115
• /
• 2004

The purpose of this paper is to study on the architectural value in Dom-Ino system. Dom-Ino system by Le Corbusier is a structural system for effective production in terms of physical reproductivity and a modeling system from the view of formal composition. It creates planar grid with a fixed ratio, manipulates the user group, and becomes the basic construction method. Form comes out of geometrical proportion system, and grid-based plan provides regularity and order to elevation planning. Production requires standardization. Indoor space is maintained by uniformed and integrated service facilities. Dom-Ino system was a transitional step of the Modulor system which was created by Le Corbusier in 1945 and composes of and equivalent proportional system. The fact that the numerical proportion system is the one of appropriate design methods implys a progressive concept that architectural configurations are controlled by the technology of that time. And also the system is one of the object type of Corbusier's housing architecture.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.1-6
• /
• 2010

When the ceramic material is being machined, micro crack and brittle fracture dominate the process of material removal. Generally, ceramics are very difficult-to-cut materials and machined using conventional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Machinable ceramics used in this study contain BN powder to overcome these problem and for productivity elevation. This paper focuses on machinability evaluation during end mill process with CNC machining center in this study. Experiment for this purpose is performed for tool wear patterns and mechanism.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.87-91
• /
• 2004

In this paper, the paralleled forward converter, that is generally used as the power supply for the low voltage, high current load, is described. The proposed forward converter for battery charging could be provided the power without failure not only in steady state but also in the transient period by the step load variation or the unexpected faults among the converter modules. Each converter nodule designed is operated alone with the self closed controller for the elevation of stability, performance, reliability, and maintainability. The frequency response of the designed converter module is analyzed, and the stability is confirmed in analytic method. And the experiments of the paralleled battery charger are carried out in steady state, in the step load variation.

• 대한간호학회지
• /
• 제36권2호
• /
• pp.353-360
• /
• 2006

Purpose: This study was done to investigate the effects of backrest elevation of 0 degree and 30 degrees that minimize the risk of increasing ICP when CVP is measured. Methods: Subjects were sixty-four patients who stayed in the neurosurgical intensive care unit after brain surgery at two university-based hospitals. CVP, blood pressure, heart rate and ICP were measured along with position changes in order of backrest position with primary 30 degrees backrest position, 0 degree backrest position and secondary 30 degrees backrest position. For data analysis, one-group, repeated-measures analysis of variance design was used in SAS program. Results: Backrest elevations from 0 degree to 30 degrees did not alter the CVP without increasing the ICP. Therefore, 30 degrees backrest position is a preventive position without increasing ICP. Conclusion: 30 degrees backrest position might be appropriate for brain injury patients when CVP is measured.

• 건축역사연구
• /
• 제7권1호
• /
• pp.109-120
• /
• 1998

Mekuro-Kazoen BLDG. is a complex of office, hotel, and banquet halls, builted in 1991, Tokyo, Japan. This building suggest us various issues about the representation of traditionality in current architecture. We can find the possibility of representation of traditionality in large complex, in past, rarely applicated. Even in Japan, such trial in official building as New Office Building of Tokyo in Sinzuku shows a application only in the elevation plan. In Mekuro-Kazoen BLDG, the applications of traditionality are found not only in external appearance, but also in interior design. And the traditional Japanese gardens in front of building and in atrium enrich the traditionality And the modenity and traditionality in this building are represented simultaneously not deteriorating each other. The issue of representation of traditionality in architecture should be succeed not only in now but also in the future. The method of application need to be studied and improved. The fields of application also should be extended such as large complex buildings and future-oriented buildings.