• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.211-216
• /
• 2018

Separation technology combining adsorption and membrane is expected to be applied in many fields such as water treatment. In this fusion technique, a functional carbon membrane having a carbon whisker grown on the surface of the membrane was developed to inhibit membrane fouling, which is a problem in the membrane separation process. In this study, to elucidate the mechanism of manufacturing the functional carbon membrane, the membrane was pretreated with the polymer latex of each mixing ratio and the membrane was formed by the CVD (Chemical Vapor Deposition) method. The membrane was analyzed by scanning electron microscope (SEM), CHN analyzer (Elemental Analyzer), and X-ray diffraction (XRD). As a result, the diameter and density of carbon whiskers were higher in case of polyvinyl di-chloride (PVdC): polyvinyl chloride (PVC) = 4.5: 55. It seems possible to control the diameter and density of the carbon whiskers according to the hydrogen content of the polymer latex.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.91-96
• /
• 1997

In order to investigate the behavior of particulate carbon and benzo(a)pyrene(B(a)P) in the ambient air, suspended particle matters were collected from April, 1990 to February, 1992, and total carbon(TC), organic carbon(OC), elemental carbon(EC) and B(a)P were measured by an elemental analyzer and a HPLC. The results were as follows the average concentration of TC was 38.6 $\mug/m^3$ and its concentration was higher in winter(45.4 $\mug/m^3$) and fa11(44.3 $\mug/m^3$) than in summer(36.8 $\mug/m^3$) and spring(28.9 $\mug/m^3$). The monthly concentration trends both of EC and OC was similar, but seasonal variation of EC concentrations was larger than that of OC. The average concentration of B (a)P was 2.2 ng/m$^3$, and was higher in winter(4.1 ng/m$^3$) and fall(3.2 ng/m$^3$) than in spring(1.2 ng/m$^3$) and summer(0.6 ng/m$^3$). The seasonal behavior of carbon and B(a)P was to similar except for summer. The correlation coefficient(r) between EC and B(a)P was 0.71, and the correlation coefficient(r) between OC and B(a)P was 0.66.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.411-418
• /
• 1995

A method for the direct determination of elemental content in each of aerosol particles by inductively coupled plasma atomic emission (ICP-AES) or mass spectrometry (ICP-MS) is described. This method is based upon the introduction of diluted aerosol into an ICP and the measurement of either the flash emission intensities of an atomic spectral line or ion intensities. A pulse-height analyzer is used for the measurement of the distribution of the elemental content. In order to calibrate the measuring system, monodisperse aerosols are used. The potentials of the method are shown by demonstrating the copper emission signals from the aerosols generated at a small electric switch, a study of the relation between the decreasing rate of particle number density and particle size, and measurements of calcium contents in the individual biological cells.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.33-37
• /
• 1998

The hardening test of gelatin with 2,4-dichloro-6-hydroxy-1,3,5-triazine mono sodium salt was studied at pH 5, 7, 8 and about increasing temperature, respectively. The hardener was prepared by the reaction of cyanuric chloride with sodium hydroxide, disodium hydrogenphosphate-12-water and trisodium phosphate-12-water in the presence of water. The product was identified by elemental analyzer. IR spectrophotometer. Novel hardener can be used in photographic emulsion and showed very good hardening effect.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.3
• /
• pp.35-41
• /
• 1996

In this paper, intermediate cyan coupler was prepared by the reaction of 2-nitro-4, 6-dichloro-5-methylphenol with Pd(5wt%). The product was identified by using various analytical tools such as melting point, elemental analyzer, IR spectrophotometer and mass spectrometer. The reaction of intermediate cyan coupler with CD-3(color development agent) was shown cyan color.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.482-486
• /
• 2010

In this study, 2-(Nitroimino)imidazoline was prepared by the reaction of nitroguanidine with ethylenediamine in the presence of water at $65^{\circ}C$. The product was identified by using various analytical tools such as melting point, elemental analyzer, IR spectrophotometer, mass spectrometer and TLC. This compound can be used as intermediate for prepareing pesticide-imidacloprid packing and cosmetics preservative.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.31-39
• /
• 1996

In this study, sensitizing dye was prepared by the reaction of 2-methyl-3-sulfopropyl-4, 5-naphthothiazolium(inner salt) with triethyl orthoformate in the presence of triethylamine. The product was identified by using various analytical tools such as Elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, $^1H-NMR$ spectrometer, TGA and DSC. Therefore, it was concluded that naphthothiazolo carbocyanine dye can be used as red-sensitizing dye for the spectral sensitization of photographic emulsion.

• 한국약용작물학회:학술대회논문집
• /
• 2009.05a
• /
• pp.189-190
• /
• 2009

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.237-242
• /
• 2011

In this study, the catalytic activity of Mn-Phthalocyanine (Mn-PC) for VOCs (acetadehyde, propionaldehyde and toluene) combustion was determined. The reaction was carried out in a fixed bed reactor at the temperature range of $200{\sim}380^{\circ}C$. We investigated the physicochemical properties of Mn-PC before and after the pretreatment (air, $450^{\circ}C$, 1 hr, 60 cc/min) by TGA (Thermogravimetric Analyzer), BET (Brunauer Emmett Teller), EA (Elemental Analyzer), XRD (X-ray Diffractometer) and SEM (Scanning Electronic Microscope). By TGA analysis, 88 wt.% mass loss of Mn-PC was found at $419^{\circ}C$. The BET surface area of Mn-PC increased after the pretreatment. The decomposition and combustion of organic components in Mn-PC were observed by EA analysis. We also confirmed that Mn-PC had transformed into a new manganese oxide phase ($Mn_3O_4$) after the pretreatment by XRD analysis. By SEM analysis, many of the micropores generated during the pretreatment were found. The catalytic activity of Mn-PC with the pretreatment for propionaldehyde combustion was higher than that of $Mn_3O_4$ and fresh Mn-PC. It showed the catalytic activity of Mn-PC with the pretreatment for VOCs combustion by the order of toluene < acetadehyde < propionaldehyde.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.410-418
• /
• 2016

In this study, we prepared electrically conducting composites using epoxy resin of diglycidyl ether of bisphenol A (DGEBA) as a matrix, triethylenetetramine (TETA) as a hardener and nickel powder or multi-walled carbon nanotubes (MWCNTs) grafted with $-NH_2$ groups (MWCNT-$NH_2$) as electrically conducting fillers. Electrical conductivity of composite films were measured by coating on the slide glass with a doctor blade. We measured modification reactions of MWCNT and reaction of MWCNT-$NH_2$ with DGEBA epoxy resin by fourier transform infrared spectrometer (FTIR), thermogravimetric analyzer (TGA) and elemental analyzer (EA). Morphology of composites was investigated by scanning electron microscope (SEM) and sheet resistances of composites were measured by 4-point probe. We found $(9.87{\pm}1.09){\times}10^4{\Omega}/sq$ of sheet resistance for epoxy composite containing both 40 wt% nickel powder and 0.5 wt% of MWCNT-$NH_2$ as fillers, equivalent to epoxy composite containing 53.3 wt% nickel powder only as a filler.