• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1171-1176
• /
• 2011

본 논문에서는 주기적으로 배치된 렌즈 배열을 이용한 광학 픽업과 평면기반 컴퓨터 집적 영상 복원 (CIIR) 기술에서 요소 영상 크기와 3차원 물체의 복원 깊이 위치에 따른 복원 성능에 대한 분석을 제시한다. 주기적으로 배치된 렌즈 배열에서는 3차원 물체를 픽업할 때 주기성으로 인한 희박 표본화가 발생함이 보고된다. 또한 희박 표본화가 발생하는 3차원 물체의 위치는 요소 영상의 크기와 관계식을 제시한다. 희박 표본화를 회피하는 방안을 제시하고, 이론의 평가를 위해서 컴퓨터 실험을 진행했고 그 결과는 이론을 잘 뒷받침함을 보였다.

• 자원환경지질
• /
• 제29권1호
• /
• pp.21-24
• /
• 1996

Inductively coupled plasma atomic emission spectrophotometer (ICP/AES) is a versatile modern instruments for the multi-element analysis, but quantitative analysis using ICP/AES with normal pneumatic nebulizer is not applicable for the measurement of elemental concentrations in water down to the drinkining water standard level except a few elements because of poor detection limits. However, the detection limit can be lowered enough to measure drinking water standard, if ultrasonic nebulizer and/or hydride vapor generator is attached. This method is tested with groundwater samples from Tajeon area. It is confirmed that the elemental concentrations in these samples are within the limit of drinking water standard for the most elements. However, uranium concentration is very high in some samples compared with the concentrations suggested by Environmental Protection Agency of U.S.A. There is no standard concentration level to this element in Korea and it should be prepared immediately.

• 환경위생공학
• /
• 제10권2호
• /
• pp.67-73
• /
• 1995

In order to study of characteristics of collected filter as analysis of carbon in airborne particulate matters by Elemental Analyzer, quartz fiber filter and glass fiber filter were used. The results are followed as; There was no difference of confidence in collection rate of airborne particulate matters between quartz fiber filter and glass fiber filter. Airborne particulate matters were collected on both filters evenly and the use of quartz fiber filter is better than glass fiber filter as analysis of carbon by thermal method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.52-57
• /
• 2000

STD11 is one of difficult-to-cut materials and its cutting characteristic data is not built enough. A bad cutting condition of it leads to low productivity of die and mould, so it is necessary to evaluate the machining characteristics of STD11. In this paper, the relations of the geometry of ball-end mill and mechanics of machining with it are studied. The helix angle of ball-end mill varies according to a location of elemental cutting edge in the cutting process are difficult to calculate accurately. To calculate instantaneous cutting forces, it is supposed that the tangential, radial and axial cutting force coefficients are functions of elemental cutting edge location. Elemental cutting forces in the x,y and z direction are calculated by coordinate transformation. The total cutting forces are calculated by integrating the elemental cutting forces of engaged cutting edge elements. This model is verified by slot and side cutting experiments of STD11 workpiece which was heat-treated to HRC45.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.31-39
• /
• 1990

An analytical method for particulate carbon and other elements by using elemental analyzer was investigated. Carbon, hydrogen, and nitrogen was determined as CO$_{2}$, H$_{2}$, and N$_{2}$, respectively. Organic was determined after scparation from elemental carbon(Cae) by volatilization and thermal decomposition in a heated helium flow. With organic materials examined in this reprot, more than 90% of carbon was detected as above 600$^{\circ}$C. But it is considered that a few percents of some compounds were charred above 550$^{\circ}$C. A small amount of Cae was oxidized in the inert atmosphere above 850$^{\circ}$C, but the reason was not explained clearly. Based on the thermal chracteristics of Cao it was found that the optimum temperature of heating in the helium flow of an elemental analyzer for Cao analysis is 630$^{\circ}$C. Carbon in a sample after removing Cao was assumed as Cae and the gramatom ratio of hydrogen to carbon in the sample was 0.4 and less. Rescovery of nitrogen derived from some ammonium salts and nitrates was 100% by two-step measurement with elemental analyzer. By the analytical method investigated in this report, carbon and other elements in suspended particulates(S.P) collected at an urban area in Seoul were measured. There was a good correlation between total nitrogen in SP measured by elemental analyzer and nitrogen estimated form ammonium ions and nitrate ions in SP. The nitrogen from these ions accounts for 80% of the total nitrogen. It is further suggested that the residue(20%) of the total nitrogen is attributed to the other nitrogeneous compounds.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E3호
• /
• pp.87-94
• /
• 2005

Wet scavenging by rain drops is a most important removal process of air pollutants. In order to study the scavenging mechanisms of aerosol particles, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. Rain water were collected continuously and separated into the soluble and insoluble components. The elemental concentrations in both components were determined by a PIXE analysis. The physical and chemical characteristics of atmospheric aerosols during the rainfall events were measured simultaneously. The elemental concentrations in rain water decreased substantially just after rain started and then gradually declined in subsequential rain fall exceeding 1.0 mm. The large particles were scavenged more easily than the fine particles. Fe, Ti and Si in rain water were in high insoluble state. Contrarily, almost whole of S was dissolved in rain water.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.206-211
• /
• 1996

Closed-die forging of external spine is analysed using an upper bound elemental technique. The kinematically admissible velocity field for three-dimensional deformation in forging of the external spine with trapezoidal teeth was obtained. The upper bound to the deforming load necessary and the the deformed configurations are predicted using integration of the formulation of energy expressions which were obtained from B(upset forging method) were considerd in the present analysis and the theoretical results compared with experimental ones Experiments were carried out on plasticine as model material at room temperature where talcum powder was used as a lubricant. The present investigation revealed that the analytical method B predicts a reducet forging load and improved configuration better than method A for the forged products.

• 분석과학
• /
• 제7권4호
• /
• pp.477-482
• /
• 1994

2개 광산의 무연탄을 Co와 Au 비교체를 사용한 비파괴 중성자 방사화분석법으로 분석하여 31개 원소들의 함량을 구했다. 각 원소의 평균 함량과 함량 범위를, 그리고 광산의 원소별 함량 차이를 제시하였다. 또한 희토류 원소들의 원자량에 따른 함량 분포의 경향과 광상의 깊이에 따른 원소들의 함량 변화를 제시하였다.

• 한국환경보건학회지
• /
• 제28권3호
• /
• pp.64-71
• /
• 2002

Hair provides important information about the body's mineral status. Therefore, we have studied the trace elemental distribution in human hair under different inhalation and ingestion environment using neutron activation analysis (NAA). NAA is a powerful analytical method which can be used successfully to determine trace elements in environmental and biological materials. Total diet and six different herbal medicine were analysed to study ingestion environment. Airborne dust in foundry was analysed and compared with outdoor dust to study inhalation environment. Human hairs of common person, herbal medicine taker and foundry worker were analysed to estimate the trace elemental distribution of people under different inhalation and ingestion environment. Analytical results show that herbal medicines contain higher micronutrients such as Ca, Mg, Mn and Cu that total diet and airborne dust in foundry has high Cr. The concentration of Ca, Mg and Mn in hair of herbal medicine taker is two times higher than in hair of common person and Cr con-centration in hair of foundry worker is about three times higher than in hair of common person. These results show that NAA can be used importantly to monitor human health through biological and environmental samples.

• BMB Reports
• /
• 제38권3호
• /
• pp.307-313
• /
• 2005

Thiobacillus ferrooxidans is one of the most important bacterium used in bioleaching, and can utilize $Fe^{2+}$ or sulphide as energy source. Growth curves for Thiobacillus ferrooxidans have been tested, which show lag, logarithmic, stationary and aging phases as seen in other bacteria. The logarithmic phases were from 10 to 32 hours for Thiobacillus ferrooxidans cultivated with $Fe^{2+}$ and from 4 to 12 days for Thiobacillus ferrooxidans cultivated with elemental sulphur. Differences of protein patterns of Thiobacillus ferrooxidans growing on elemental sulphur and $Fe^{2+}$ separately were investigated after cultivation at $30^{\circ}C$ by the analysis of two-dimensional gel electrophoresis (2-DE), matrix-assisted laser desorption/ ionization (MALDI)-Mass spectrometry and ESI-MS/MS. From the 7 identified protein spots, 11 spots were found more abundant when growing on elemental sulphur. By contrast 6 protein spots were found decreased at elemental cultivation condition. Among the proteins identified, cytochrome C have been previously identified as necessary elements of electron-transfering pathway for Thiobacillus ferrooxidans to oxidize $Fe^{2+}$; ATP synthase alpha chain and beta are expressed increased when Thiobacillus ferrooxidans cultivated with $Fe^{2+}$ as energy source. ATP synthase Beta chain is the catalytic subunit, and ATP synthase alpha chain is a regulatory subunit. The function of ATPase produces ATP from ADP in the presence of a proton gradient across the membrane.