• Korean Journal of Plant Taxonomy
• /
• v.37 no.4
• /
• pp.363-386
• /
• 2007

Endemic element of the Russian Far East (RFE) flora includes 497 species of 150 genera and 46 families. The level of endemism in structure of regional natural flora reaches 11.1% as a whole, and in structure of its native fraction - 13.1%. As a result of chorologic and ecocenotic analysis of RFE flora endemic element it is revealed that it consists of 8 main geographical groups and 7 main floristic complexes. The largest number of endemic species is concentrated in Arctic - Alpine & Montane (140, 28.2%), Forest (107, 21.5%) and Maritime (88, 17.7%) floristic complexes as well as in Russian Far East - West-Pacific (136, 27.4%), Japan Sea (88, 17.7%) and North-East-Asian - Beringian (69, 13.9%) geographical groups. It's possible to distinguish three main areas with similar eco-geographical differentiation of endemics on RFE as follows: (1) North-East Asia sector of RFE which North-East-Asian - Beringian and Maritime Okhotia - Beringian geographical groups approximately correspond to, (2) Continental part of East Asia sector of RFE (West - Okhotian, Amur - Okhotian, Amur - Ussirian, Okhotsk Sea and Japan Sea groups) and (3) Oceanic part of East Asia sector (Russian Far East - West Pacific group). Taxonomical variety of RFE endemics on these territories makes up accordingly (1) - 99 species (19.9%), (2) - 259 (52.8%) and (3) - 136 (27.4%).

• Tribology and Lubricants
• /
• v.39 no.3
• /
• pp.118-122
• /
• 2023

In our study, we develop a finite element model based on Archard's wear law to predict the cumulative wear and the evolution of the tool profile in friction stir welding (FSW) applications. Our model considers the rotational and translational behaviors of the tool, providing a comprehensive description of the wear process. We validate the accuracy of our model by comparing it against experimental results, examining both the predicted cumulative wear and the resulting changes to the tool profile caused by wear. We perform a detailed comparison between the predictions of the model and experimental data by manipulating non-dimensional coefficients comprising model parameters, such as element sizes and time increments. This comparison facilitates the identification of a specific non-dimensional coefficient condition that best replicates the experimentally observed cumulative wear. We also directly compare the worn tool profiles predicted by the model using this specific non-dimensional coefficient condition with the profiles obtained from wear experiments. Through this process, we identify the model settings that yield a tool wear profile closely aligning with the experimental results. Our research demonstrates that carefully selecting non-dimensional coefficients can significantly enhance the predictive accuracy of finite element models for tool wear in FSW processes. The results from our study hold potential implications for enhancing tool longevity and welding quality in industrial applications.

• Korean Journal of Acupuncture
• /
• v.25 no.4
• /
• pp.73-88
• /
• 2008

Objective : The aim of this research was to investigate the effect on five element constitutional acupuncture(Sa-am acupuncture) at 4 acupoints by needle manipulation to sedate Six Fu-Organ on hyperlipidemia induced by high fat diet in rats. Method : We recorded data of weight gain, food intake, food efficiency, weight of liver, heart, spleen, lung, kidney, levels of total cholesterol, triglyceride, HDL-cholesterol, AST, ALT in serum of rats fed high fat diet for 5 weeks. Spraque Dawley rats were divided into eight groups(normal; normal diet and non-acupuncture group, control; non-acupuncture group, Acu-LI; acupuncture at $SI_5{\cdot}LI_5{\cdot}BL_{66}{\cdot}LI_2$ group, Acu-ST; acupuncture at $GB_{41}{\cdot}ST_{43}{\cdot}LI_1{\cdot}ST_{45}$, Acu-SI; acupuncture at $BL_{66}{\cdot}SI_2{\cdot}ST_{36}{\cdot}SI_8$, Acu-BL; acupuncture therapy at $ST_{36}{\cdot}BL_{40}{\cdot}GB_{41}{\cdot}BL_{65}$, Acu-TE; acupuncture at $BL_{66}{\cdot}TE_2{\cdot}ST_{36}{\cdot}TE_{10}$, Acu-GB; acupuncture at $LI_1{\cdot}GB_{44}{\cdot}SI_5{\cdot}GB_{38}$. After needles inserted, it was rotated clockwise and anticlockwise 12 times on rats fed high fat diet. Results : The body weight was decreased in Acu-SI, Acu-TE, Acu-GB group, /the food intake was decreased in Acu-TE, / the food efficiency was decreased in Acu-SI, /serum triglyceride was decreased in Acu-LI, Acu-ST, Acu-BL, Acu-GB, /serum total cholesterol was decreased in Acu-LI, Acu-BL, serum ALP was decreased in Acu-LI, Acu-ST, Acu-BL, Acu-TE, Acu-GB. While the relative weight of heart was increased in Acu-LI, Acu-SI, the relative weight of kidney was increased in Acu-SI, Acu-GB. Conclusion : These results suggest that five element constitutional acupuncture(Sa-am acupuncture) may be having an therapeutic influence on hyperlipidemia induced by high fat diet. Further researches of acupuncture manipulation are needed in the future based on our study.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.1
• /
• pp.10-15
• /
• 2011

PURPOSE. This study investigated the influence of bone quality and surgical technique on the implant stability quotient (ISQ) value. In addition, the influence of interfacial bone quality, directly surrounding the implant fixture, on the resonance frequency of the structure was also evaluated by the finite element analysis. MATERIALS AND METHODS. Two different types of bone (type 1 and type 2) were extracted and trimmed from pig rib bone. In each type of bone, the same implants were installed in three different ways: (1) Compaction, (2) Self-tapping, and (3) Tapping. The ISQ value was measured and analyzed to evaluate the influence of bone quality and surgical technique on the implant primary stability. For finite element analysis, a three dimensional implant fixture-bone structure was designed and the fundamental resonance frequency of the structure was measured with three different density of interfacial bone surrounding the implant fixture. RESULTS. In each group, the ISQ values were higher in type 1 bone than those in type 2 bone. Among three different insertion methods, the Tapping group showed the lowest ISQ value in both type 1 and type 2 bones. In both bone types, the Compaction groups showed slightly higher mean ISQ values than the Self-tapping groups, but the differences were not statistically significant. Increased interfacial bone density raised the resonance frequency value in the finite element analysis. CONCLUSION. Both bone quality and surgical technique have influence on the implant primary stability, and resonance frequency has a positive relation with the density of implant fixture-surrounding bone.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.1
• /
• pp.49-56
• /
• 2012

The purpose of this study was to understand the influence of instant noodle's selection attribution on satisfaction and to empirically analyze whether or not grade (elementary schoolchildren, middle school students, high school students) plays a moderating role in the relationship between selection attribution and satisfaction. Further, this study examined the differences in demographic characteristics among two groups of subjects divided by instant noodle's selection attribution. Based on a total of 1021 samples, this study verified a total of 3 hypotheses using the SPSS program. Data were analyzed by frequency analysis, chi-square, t-test, factor analysis, reliability analysis, cluster analysis, discriminant analysis, and hierarchical regression analysis. Results of the study were as follows. There were three different instant noodle's selection attributions among the children and adolescents investigated: internal element, external element, and company reliability. The multiple regression results show that internal element (=.391), external element (=.239), and company reliability (=.063) among customers' selection attributions had significant positive effects on satisfaction. In addition, the effect of selection attribution upon satisfaction was partially moderated according to grade. Further, cluster analysis divided subjects into two groups according to instant noodle's selection attribution: high-selection group vs. low-selection group. The wo groups of subjects classified by instant noodle's selection attribution were also different from each other in demographic characteristics. Limitations and future research directions are also discussed.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.79-98
• /
• 1999

In the present study, a simple finite element method of analysis to predict non-uniform settlements at the interface between the mat foundation and foundation soils is proposed. Based on the proposed finite element method of analysis, the method to evaluate load sharing ratios of the foundation soils adjacent to the granular group piles is also presented. Further proposed is a procedure to estimate ultimate bearing capacity of the skirted granular group piles in a square pattern. To verify validity of the proposed methods and the estimated ultimate bearing capacity of the skirted group piles, comparisons are made with the results analyzed by using the PENTAGON3D FEM program. Finally, behavior characteristics with different reinforcement patterns of the skirts and the effect of an increase of ultimate bearing capacity due to the skirts are analyzed in connection with the design parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.139-144
• /
• 2005

A rigorous research is underway in our team, for the design and development of high figure of merits (ZT= 1.5${\sim}$2.0) micro-thermoelectric coolers. This paper discusses the fabrication process that we are using for developing the $Sb_2Te_3-Bi_2Te_3$ micro-thermoelectric cooling modules. It describes how to obtain the mechanical properties of the thin film TEC elements and reports the results of an equation-based multiphysics modeling of the micro-TEC modules. In this study the thermoelectric thin films were deposited on Si substrates using co-sputtering method. The physical mechanical properties of the prepared films were measured by nanoindentation testing method while the thermal and electrical properties required for modeling were obtained from existing literature. A finite element model was developed using an equation-based multiphysics modeling by the commercial finite element code FEMLAB. The model was solved for different operating conditions. The temperature and the stress distributions in the P and N elements of the TEC as well as in the metal connector were obtained. The temperature distributions of the system obtained from simulation results showed good agreement with the analytical results existing in literature. In addition, it was found that the maximum stress in the system occurs at the bonding part of the TEC i.e. between the metal connectors and TE elements of the module.

• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.45-68
• /
• 2009

An aim of the study is to develop an efficient numerical simulation technique that can handle the two-scale analysis of fluid permeation filters fabricated by the partial sintering technique of small spherical ceramics. A solid-fluid mixture homogenization method is introduced to predict the mechanical characters such as rigidity and permeability of the porous ceramic filters from the micro-scale geometry and configuration of partially-sintered particles. An extended finite element (X-FE) discretization technique based on the enriched interpolations of respective characteristic functions at fluid-solid interfaces is proposed for the non-interface-fitted mesh solution of the micro-scale analysis that needs non-slip condition at the interface between solid and fluid phases of the unit cell. The homogenization and localization performances of the proposed method are shown in a typical two-dimensional benchmark problem whose model has a hole in center. Three-dimensional applications to the body-centered cubic (BCC) and face-centered cubic (FCC) unit cell models are also shown in the paper. The 3D application is prepared toward the computer-aided optimal design of ceramic filters. The accuracy and stability of the X-FEM based method are comparable to those of the standard interface-fitted FEM, and are superior to those of the voxel type FEM that is often used in such complex micro geometry cases.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.79-86
• /
• 2008

The purpose of this study was to investigate the effect retention element formed by metal surface treatment method on the bond strength of indirect composite resin and metal. The metal specimens were cast from Ni-Cr alloy($Rexillium^{(R)}$ III). They were divided into 5 groups by applied retention element: $50{\mu}m$ aluminium oxide sandblasting group, $250{\mu}m$ aluminium oxide sandblasting group, 0.2mm retention crystal group, 10% $H_{2}SO_{4}$ solution etching group, $110{\mu}m$ $Rocatec^{TM}$ Plus system group. Total 50 metal specimens were veneered with Sinfony indirect composite resin system. Specimens were tested for shear bond strength on an Instron universal testing machine and fracture mode of fractured specimens were analyzed by SEM and EDS. 1. 0.2 mm retention crystals were most effective in improving the resin-metal shear bond strength (p<0.05). 2. Sandblasting by $250{\mu}m$ aluminium oxide were more effective than sandblasting by $50{\mu}m$ aluminium oxide in improving the resin-metal shear bond strength(p<0.05). 3. Fracture mode of resin-metal fractured surface were cohesive failure mode in 0.2mm retention crystal, mixed failure mode in sandblasted specimens, etched specimens and the specimens sandblasted with $110{\mu}m$ $Rocatec^{TM}$ Plus system.

• Biomolecules & Therapeutics
• /
• v.20 no.2
• /
• pp.207-213
• /
• 2012

The present study examined the effects of krill-derived phosphatidylserine (Krill-PS) on the learning and memory function and the neural activity in rats with trimethyltin (TMT)-induced memory deficits. The rats were administered vehicle (medium-chain triglyceride: MCT) or Krill-PS (50, 100 mg/kg, p.o.) daily for 21 days. The cognitive improving efficacy of Krill-PS in TMT-induced amnesic rats was investigated by assessing the Morris water maze test and by performing choline acetyltransferase (ChAT), acetylcholinesterase (AChE) and cAMP responsive element binding protein (CREB) immunohistochemistry. The rats with TMT injection showed impaired learning and memory of the tasks and treatment with Krill-PS produced a significant improvement of the escape latency to find the platform in the Morris water maze at the $2^{nd}$ and $4^{th}$ day compared to that of the MCT group (p<0.05). In the retention test, the Krill-PS+MCT groups showed increased time spent around the platform compared to that of the MCT group. Consistent with the behavioral data, Krill-PS 50+MCT group significantly alleviated the loss of acetylcholinergic neurons in the hippocampus and medial septum compared to that of the MCT group. Treatment with Krill-PS significantly increased the CREB positive neurons in the hippocampal CA1 area as compared to that of the MCT group. These results suggest that Krill-PS may be useful for improving the cognitive function via regulation of cholinergic marker enzyme activity and neural activity.