• 자원환경지질
• /
• 제44권1호
• /
• pp.1-10
• /
• 2011

탐사 지역인 빠찌딴지역은 인도네시아 자바섬 동부의 남서익부에 위치하며, 주로 중신세 중기의 퇴적암류 및 이들을 관입한 석영반암과 암맥류들로 구성되어 있다. 빠찌딴 지역 내 금속광화작용과 관련된 이상대 및 이를 기초로 광상을 찾기 위하여 하상퇴적물, 중사 및 토양 등을 이용한 지화학 탐사가 지질학적 탐사와 함께 수행되었다. 상기 지화학탐사 결과들을 중합하여 해석한 결과 금뿔 (동), 쩜뽕 (금), 까시한 (동-연-아연) 등의 세 지역이 정밀 조사가 필요한 유망 금속 광화 이상대로 확인되었다 이중 까시한지역은 동-연-아연의 이상치가 가장 강하게 중첩된 지역으로서 정밀 토양 지화학 탐사와 함께 잠두광체 확인을 위한 지질학적 탐사가 수행되었다. 까시한지역에 대한 정밀 토양 지화학탐사 결과에 대한 통계학적 해석 결과 10 곳의 이상대가 확인 되었으며 이 중 5개 이상대는 까시한지역 중앙부 석영반암 관입 분포 지역에 밀집 위치하고 있음이 확인되었다. 이들 이상대는 석영 반암의 관입과 관련된 함 동-연-아연 망상형 맥상 광체 및 스카른형 광체와 관련되어 있음이 확인되었다.

• 자원환경지질
• /
• 제31권4호
• /
• pp.297-310
• /
• 1998

Geochemical characteristics of environmental toxic elements at the Narim mine area were investigated on the basis of major, minor, rare earth element geochemistry and mineralogy. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in soils and sediments range from 11.57 to 22.21 and from 1.86 to 3.93, and are partly negative and positive correlation against $SiO_2/Al_2O_3$ (3.41 to 4.78), respectively. These suggested that sediment source of host granitic gneiss could be due to rocks of high grade metamorphism originated by sedimentary rocks. Characteristics of some trace and rare earth elements of V/Ni (0.33 to 1.95), Ni/Co (2.00 to 6.50), Zr/Hf (11.27 to 53.10), La/Ce (0.44 to 0.55), Th/Yb (4.07 to 7.14), La/Th (2.35 to 3.93), $La_N/Yb_N$ (6.58 to 13.67), Co/Th (0.63 to 2.68), La/Sc (3.29 to 5.94) and Sc/Th (0.49 to 1.00) are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. Major elements in all samples are enriched $Al_2O_3$, MgO, $TiO_2$ and LOI, especially $Fe_2O_3$ (mean=7.36 wt.%) in sediments than the composition of host granitic gneiss. The average enrichment indices of major and rare earth elements from the mining drainage are 2.05 and 2.91 of the sediments and are 2.02 and 2.60 of the soils, normalizing by composition of host granitic gneiss, respectively. Average composition (ppm) of minor and/or environmental toxic elements in sediments and soils are Ag=14 and 1, As=199 and 14, Cd=22 and 1, Cu=215 and 42, Pb=1770 and 65, Sb=18 and 3, Zn=3333 and 170, respectively, and extremely high concentrations are found in the subsurface sediments near the ore dump. Environmental toxic elements were strongly enriched in all samples, especially As, Cd, Cu, Pb, Sb and Zn. The level of enrichment was very severe in mining drainage sediments, while it was not so great in the soils. Based on the EPA value, enrichment index of toxic elements is 8.63 of mining drainage sediments and 0.54 of soils on the mining drainage. Mineral composition of soils and sediments near the mining area were partly variable being composed of quartz, mica, feldspar, amphibole, chlorite and clay minerals. From the gravity separated mineralogy, soils and sediments are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various hydroxide minerals.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.545-566
• /
• 1999

The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of implant or metal framework of removable prosthesis, welding is necessary to reconnect the fracture site to control the casting distortions. To overcome the difficulties in soldering the titanium due to high oxidation property, much effort have been devoted. In this study, some of mechanical properties were compared between pure titanium and Ti-6Al-4V alloy by using after welding, electron beam welding technique and tungsten arc welding. Mechanical properties such as tensile strength, yield strength, elongation and microhardness were measured. And, in order to compare the effect of welding site and surrounding metal tissue according to the welding condition, SEM photographs were taken and element distribution was observed by Wave Dispersion Spectroscopy. Through analyses of the data, following results were obtained; 1. In items such as tensile strength, yield strength and elongation according to the welding techniques of pure titanium, only tungsten arc welded group showed significant lower value than other groups(P<0.05). 2. In items such as tensile strength and yield strength according to the welding techniques of Ti-6Al-4V alloy, control group and tungsten arc welded group showed significant difference among all the groups(P<0.05). 3. Ti-6Al-4V alloy exhibited significantly greater elongation than control group when the laser welding method and electron beam welding method were used, and elongation showed increasing tendency. 4. Pure titanium specimens exhibited increasing tendency of microhardness regardless of the weld-ing technique applied, and especially tungsten arc welded group demonstrated a great increase of microhardness than parent metal. 5. There was no hardness change in laser welded group and electron beam welded group of Ti-6Al-4V alloy, but in tungsten arc welded group, hardness changed greatly from parent metal to weld seam. 6. Through the metallographic examination and scanning electron microscopy, laser welding caused central fusion and recristallizations were formed and tungsten arc welding caused localized fusion to 0.3-0.7mm from the surface.

• 보존과학회지
• /
• 제27권1호
• /
• pp.31-40
• /
• 2011

동화(진사)는 구리를 원료로 하는 우리나라 고유의 적색 무기안료로써 고려와 조선시대에 도자기 채회 안료로 사용되었으나 생산과 발색이 어려워 소량의 작품만 전해진다. 조선시대의 고문헌에 의하면 동광석의 산지는 한국 전역에 걸쳐 수많은 지역이 알려져 있으며, 일부는 오늘날까지 가행 중이다. 한국에서 산출되는 가장 흔한 동광석 광물은 황동석($CuFeS_2$)과 공작석($Cu_2CO_3(OH)_2$)이며 지역에 따라 지표에서 쉽게 채취할 수 있는 곳도 많다. 따라서 우리나라는 과거에 동화 원료를 수급하는데 자원환경적 및 지리적인 이점을 확보했던 것으로 판단된다. 이 원광석을 대상으로 발색실험을 수행한 결과, 두 광석광물 모두 적색 발색력이 우수하였다. 중요한 발색원소는 구리이며, 구리 입자는 유약층에서 대부분 $5{\mu}m$ 미만의 입자 크기를 갖는 미세하고 균질한 분산 상태를 보인다. 또한 동화안료 내의 구리 함량과 입도 크기에 따른 분산특성은 선명한 적색도와 높은 투명도를 제어하는 가장 중요한 요소인 것으로 밝혀졌다.

• 고전문학과교육
• /
• 제32호
• /
• pp.261-285
• /
• 2016

사설시조는 연행의 맥락이 제거되고 나서도 여전히 현대의 독자들에게 재미를 준다. 이 연구는 부재한 임에 대한 간절한 기다림을 노래하면서도 과장이나 희화화를 통해 웃음을 유발하는 사설시조들에 주목하였다. 그리움과 웃음이라는 서로 모순된 정서를 묘사하는 이 사설시조들은 통일되지 않고 역동적으로 변화하는 인간의 내면을 반영한다. 갈망이 그리움을 만들고 또한 갈망이 그 그리움을 우스꽝스러운 것으로 만들기 때문에 결국 그리움과 웃음은 서로 충돌하지 않고 공존할 수 있는 것이다. 이 연구는 모순적인 의미들이 공존하는 사설시조를 해석하기 위해 '기호학적 사각형'을 해석의 틀로 활용하였다. 그 결과 기다림을 노래한 사설시조들은 금지와 허가, 갈망과 염려, 노출과 은폐, 집중과 분산이라는 상반항들을 통해 해석할 수 있었다. 그리움에 웃음이 섞이는 사설시조들은 공통적으로 자아의 갈망과 세상의 금지 사이의 갈등을 바탕으로 삼고 있다. 갈망에 휩쓸리는 인간의 모습은 타인의 시선에서 볼 때 우스꽝스럽고 애처로워 보일 수도 있다. 그러나 인간은 내가 가진 약점과 내가 했던 실수를 반복하는 인간을 보고서 공감의 웃음을 짓는다. 결국 이것이 사설시조가 유발하는 인간에 대한 연민과 성찰의 웃음일 것이다.

• 헤리티지:역사와 과학
• /
• 제36권
• /
• pp.241-266
• /
• 2003

Glass pieces excavated from Mireuksa Temple dated $7^{th}$ century A.D. were characterized by chemical composition, specific gravity and melting point. Lead isotope ratios of lead glasses were also compared with those of lead ore to attribute which lead ore was delivered for making lead glass. It was known that some lead glasses found in Japan were similar with those of Mireuksa Temple as comparing the data of chemical composition and lead isotope ratios. Characteristics of lead glass from Mireuksa Temple Thirty five glass pieces of Mireuksa Temple were analyzed for five oxides and found that all was lead glass system(PbO-$SiO_2$) with the range of 70~79% for PbO and 20~28% for $SiO_2$. The concentrations of oxides such as $Al_2O_3$, $Fe_2O_3$ and CuO were below 0.4%, 0.3% and 0.9%, respectively. Principal component analysis(PCA) as a statistical method was carried out to classify glasses with the similarities of chemical concentrations. The result of PCA has shown that three groups of glasses were created according to the excavation positions and two major oxides(PbO and $SiO_2$) greatly contributed to the dispersion of glasses on principal component 1(PC1) axis and trace element oxides($Al_2O_3$ and $Fe_2O_3$) for PC2 axis. Most of lead glasses were greenish by the efficacy of iron and copper oxides and some showed yellowish-green. The gravity of lead glasses was about 4.4~5.4 and estimated melting point was near $670^{\circ}C$. Lead isotope ratios of glasses were analyzed and found quite close to a lead ore from the Bupyeong mine in Gyeonggi-do. Comparison with lead glasses found in Japan Lead glasses of Mireuksa Temple were compared with those of Japan on the basis of chemical and physical data. Chemical compositions of Japanese lead glasses dated $7^{th}{\sim}8^{th}$ century A.D. were nearly similar with those of Mireuksa Temple but lead isotope ratios of those were separated into two groups. Three distribution maps of lead ores of Korea, Japan and China with lead isotope ratios were applied for lead glasses found in Japan. The result have shown that the locations of lead glasses from Fukuoka Prefecture coincided with the region of northen part of Korea and similar with those of Mireuksa Temple and lead glasses from Nara Prefecture dated $8^{th}$ century A.D. were located in the region of Japanese lead ore. This research has demonstrated that lead glasses of Mireuksa Temple conveyed to Miyajidake site, Fukuoka Prefecture around $7^{th}$ century A.D. and glass melting pots and glass beads excavated from Nara Prefecture confirmed the first use of Japanese lead ore for production of lead glasses from the end of $7^{th}$ century A.D.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.506-521
• /
• 2007

Statement of problem: The cumulative success rate of wide implant is still controversial. Some previous reports have shown high success rate, and some other reports shown high failure rate. Purpose: The aim of this study was to analyze, and compare the biomechanics in wide implant system embeded in different width of crestal bone under different occlusal forces by finite element approach. Material and methods: Three-dimensional finite element models were created based on tracing of CT image of second premolar section of mandible with one implant embedded. One standard model (6mm-crestal bone width, 4.0mm implant diameter central position) was created. Varied crestal dimension(4, 6, 8 mm), different diameter of implants(3.3, 4.0, 5.5, 6.0mm), and buccal position implant models were generated. A 100-N vertical(L1) and 30 degree oblique load from lingual(L2) and buccal(L3) direction were applied to the occlusal surface of the crown. The analysis was performed for each load by means of the ANSYS V.9.0 program. Conclusion: 1. In all cases, maximum equivalent stress that applied $30^{\circ}$ oblique load around the alveolar bone crest was larger than that of the vertical load. Especially the equivalent stress that loaded obliquely in buccal side was larger. 2. In study of implant fixture diameter, stress around alveolar bone was decreased with the increase of implant diameter. In the vertical load, as the diameter of implant increased the equivalent stress decreased, but equivalent stress increased in case of the wide implant that have a little cortical bone in the buccal side. In the lateral oblique loading condition, the diameter of implant increased the equivalent stress decreased, but in the buccal oblique load, there was not significant difference between the 5.5mm and 6.0mm as the wide diameter implant. 3. In study of alveolar bone width, equivalent stress was decreased with the increase of alveolar bone width. In the vertical and oblique loading condition, the width of alveolar bone increased 6.0mm the equivalent stress decreased. But in the oblique loading condition, there was not a difference equivalent stress at more than 6.0mm of alveolar bone width. 4. In study of insertion position of implant fixture, even though the insertion position of implant fixture move there was not a difference equivalent stress, but in the case of little cortical bone in the buccal side, value of the equivalent stress was most unfavorable. 5. In all cases, it showed high stress around the top of fixture that contact cortical bone, but there was not a portion on the bottom of fixture that concentrate highly stress and play the role of stress dispersion. These results demonstrated that obtaining the more contact from the bucco-lingual cortical bone by installing wide diameter implant plays an important role in biomechanics.

• 천문학회보
• /
• 제39권2호
• /
• pp.90-90
• /
• 2014

The Immersion Grating Infrared Spectrometer (IGRINS) is the first astronomical spectrograph that uses a silicon immersion grating as its dispersive element. IGRINS fully covers the H and K band atmospheric transmission windows in a single exposure. It is a compact high-resolution cross-dispersion spectrometer whose resolving power R is 40,000. An individual volume phase holographic grating serves as a secondary dispersing element for each of the H and K spectrograph arms. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is $1^{{\prime}{\prime}}{\times}15^{{\prime}{\prime}}$. IGRINS has a plate scale of 0.27" pixel-1 on a $2048{\times}2048$ pixel Teledyne Scientific & Imaging HAWAII-2RG detector with a SIDECAR ASIC cryogenic controller. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be 25mm, which permits the entire cryogenic system to be contained in a moderately sized ($0.96m{\times}0.6m{\times}0.38m$) rectangular Dewar. The fabrication and assembly of the optical and mechanical components were completed in 2013. From January to July of this year, we completed the system optical alignment and carried out commissioning observations on three runs to improve the efficiency of the instrument software and hardware. We describe the major design characteristics of the instrument including the system requirements and the technical strategy to meet them. We also present the instrumental performance test results derived from the commissioning runs at the McDonald Observatory.

• 대한지리학회지
• /
• 제30권1호
• /
• pp.35-56
• /
• 1995

본 논문은 지속적인 서울시의 성장이 그 주변지역의 성장을 수반하면서 서울대도시 권화되어가는 과정을 밝히고 서울대도시권역을 설정한 후, 서울대도시권역 내에서 기능적 특성에 따라 지역을 분류하려는 것이 그 목적이었다. 1990년 시점에서의 서울대도시권역의 경계가 어느 정도 확대되었는가를 측정하기 위하여 도시화 정도를 측정하는 지표와 서울과 의 기능적 연계성을 측정하는 지표를 토대로 하여 그 권역을 설정하였다. 그 결과 서울대도 시권역은 수도권의 거의 전 지역을 포함하고 있는 것으로 나타났다. 또한 서울대도시권역에 포함된 지역들은 서울이 갖고 있는 기능을 일부 분담하면서 기능적인 면에서 특화되거나 전 문화되어 기능적 특성에 따라서 신종주거기능 탁월지역, 제조업기능 탁월지역, 서비스기능 탁월지역, 잠재적 개발가능지역의 4개 그룹으로 지역을 분류할 수 있었다.

• 자원환경지질
• /
• 제47권4호
• /
• pp.405-420
• /
• 2014

도심환경의 인위적 오염원에 의한 토양오염과 대기오염의 특성을 파악하기 위하여 서울지역 가로수의 플라타너스 잎과 토양을 격자형으로 52개의 지역에서 시료채취 및 중금속원소 함량을 측정하였다. 비교 대조를 위하여 비교적 오염이 적을 것으로 예상되는 충청남도 예산에 전원지역에서 2개 지점의 시료를 분석하였다. 서울시 토양 내 중금속 함량을 지역별로 측정한 결과, Cd, Co, Cr, Ni은 산업지역에서, Cu, Zn, Pb는 교통량 밀집지역에서 높았고, 도심 내 전원지역은 비교 대조지역보다 높은 중금속 함량을 보였다. 플라타너스 잎의 세척 전과 후의 차이는 Cd, Cu, Pb, Zn가 교통량 밀집지역에서 높았다. 토양은 Cd-Co, Cr-Ni, Cu-Zn, Pb-Zn는 상관계수 값이 0.8이상으로 양의 상관성을 보여 이들 원소간의 배출원은 유사하고, 플라타너스 잎은 Pb-Cu, Cu-Zn 원소간 상관성이 높았다. 플라타너스 잎의 중금속 조성이 토양으로부터 기인되는지를 확인하기 위해 토양과 세척한 잎과의 관계를 분석한 결과, Cr, Cu, Pb, Zn는 양의 상관성을 보였고, 반면 Cd, Co, Fe, Mn, Ni은 이들의 상관성이 낮은 것으로 보여 이들 원소들은 대기로부터 기인된 것으로 생각된다. 서울지역의 중금속 원소 분산을 등함량도의 원소별 패턴을 분석한 결과, 토양은 산업지역에서 Ni, Cr원소와 교통량 밀집지역에서 Cd, Cu, Zn원소의 오염도가 크고, 세척하지 않은 잎에 대한 Cd-Pb, Cu-Zn의 오염양상이 유사한 것으로 나타났다. 대기 중 부유된 원소별 부화지수 값을 예측을 위해 가로수 잎의 원소별 부화지수 값을 분석한 결과, Cu, Zn, Pb, Mn, Co, Ni, Cd, Cr 순으로 높았으며, 특히 서울지역에서는 Cu, Zn, Pb, Mn 으로 인한 오염이 심각한 것으로 판단된다.