• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.307-313
• /
• 2010

In this study, alternative designs for the bends used in district heating pipes are investigated. The district heating pipes, which are subjected to temperatures of 10 to $120^{\circ}C$ and a water pressure of $16\;kgf/cm^2$, have to withstand thermomechanical cyclic loads when in use. These pipes comprise three concentric tubes: a steel pipe (internal), polyurethane (PUR) insulator (middle), and a high-density polyethylene (HDPE) case (external). In addition, the bends in the district heating pipe system are covered with foam pads that cause aging. In this study, an alternative bend design that does not involve the use of a foam pad is proposed to overcome the aging problem in the bends. In the proposed design, "shear rings" are added to the surface of a bend, and its dimensions are determined by a combination of the statistical (Taguchi) method and FEM. The geometrical parameters such as thickness, height, and number of the rings significantly affect the design optimization, and hence, they affect the results of the FEM.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.611-615
• /
• 2006

Physicochemical properties of Hallabong Tangor(Citrus Kiyomi ${\times}$ ponkan) cultivated in Heated greenhouse were investigated. Moisture contents of Hallabong and M16A (a variant species of Hallabong) were 87.42% and 88.12% total sugar were 8.01% and 7.81% and acid content were 1.09% and 0.99% respectively. Vitamin C content of Hallabong was 72.01 mg/100 g that was higher than Citrus unshiu. Potassium content of M16A was 938.33 mg/kg, while Hallabong was 1369.33 mg/kg. The contents of inorganic element in a decreasing order were K > Ca > P > Mg > Na in Hallabong, and K > P > Ca > Mg > Na in Ml6A. Sucrose in Hallabong and M16A were 3.60% and 4.36%, respectively, which is half of total free sugars. Fructose and glucose Hallabong and M16A were 2.22% and 1.90%, 1.94% and 1.65% respectively. Citric acid in Hallabong and M16A was 82.32% and 69.88%, respectively among total organic acids. The content of malic acid was higher in M16A, compared to Citrus unshiu. Hesperidin and narirutin were identified main flavonoids.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.97-126
• /
• 2014

October 4, 1957 the Soviet Sputnik 1 was launched into space the first time in the history of mankind. After launching, the realm of humankind was expanded to space. Today all countries of the world wage a fierce competition in order to utilize space for various purposes. World powers of space such as United States, Russia, China, and Japan, put reconnaissance satellites and ocean surveillance satellites into orbit, being able to easily see equipment and troops movement on earth. Each country makes efforts to occupy space assets through the militarization of space and expand national interests. Recently private companies or individuals involved in commercial space activities are becoming more prevalent. Thus, in addition to space activities for military purposes, commercial space activities become widespread. Individuals and private companies as well as nations are also involved in space activities. Outer space is not the monopoly of space powers such as the United States and Russia. The whole human race can benefit from free access to space, being the common heritage of mankind. In particular, outer space becomes an indispensable element of military activities and human life. Many countries are now entering space development, putting a lot of budget into new development programs. Republic of Korea also built the Narodo Space Center, starting its space development with budget and manpower. We have to find out ways to use space not only for military purposes but also for commercial space activities that can contribute to the national economy. In addition, through the joint efforts of the international community, we have to make efforts for preservation and peaceful use of space. Various issues relating to space activities and research should be studies in order to contribute to the progress of humanity. Those issues include the definition of outer space, space debris reduction and environmental conservation issues, non-bind measure cooperation - European International Code of Conduct, space law and national legislation related empowerment issues, arms control measures in space, and restrictions on the use of nuclear fuel. We also need to be involved in the discussion of those issues as one of responsible space countries. In addition, we try to find out regional cooperation schemes such as the ESA in the Europe actively. Currently in the Northeast Asia, cooperation bodies led by Japan and China respectively, are operated in the confrontational way. To avoid such confrontation, a new cooperative body needs to be established for cooperation on space exploration and information. The system to allow the exchange of satellite information for early warning of natural disasters needs to be built as well. In addition, efforts to enhance the effectiveness of the relevant international treaties on space, and fill in the blanks in international space laws should be made at the same time. To this end, we have to do a leading role in the establishment of standards such as non-binding measures (resolution) - Code of Conduct, being discussed in the UN and other organizations, and compliance with those standards. Courses in aerospace should be requires in law schools and educational institutes, and professional manpower need to be nurtured. In addition, the space-related technology and policy needs to be jointly studied among the private, public, and military groups, and the cross exchange among them should be encouraged.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.58-65
• /
• 2012

Since Nd-Fe-B magnet was first synthesized in 1983, many new applications have emerged in the past two decades. With regard to motor market, it will expand because of strong energy saving requirements from the automobile and electric application markets. Especially, permanent magnet motors for hybrid and electric vehicles are drawing great attention and the usage of Nd-Fe-B magnets will increase all the more hereafter. There is, however, a serious problem as motors in such eco-friendly cars are said to operate in high temperatures of about $200^{\circ}C$. Nd-Fe-B magnet has a drawback of dramatically decreasing coercive force with the rise of temperature. In order to improve this aspect. the best way is to add dysprosium (Dy) into the magnet. So, Dy has become an essential element for Nd-Fe-B high-performance magnet as it helps to maintain coercive force even at high temperatures. On the other hand, the rare earth resources in the earth crust are eccentrically-located and its majority is produced in China. There is a need to reduce its usage as, especially compared to light rare earth elements as neodymium (Nd) and samarium (Sm), heavy rare earth elements including Dy are unevenly distributed to a dramatic degree, their output low, and their prices are about 10 times that of Nd. The present article includes a summary of the trend in research and development of motors and permanent magnets to solve rare-earth resources problem.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.51-62
• /
• 1993

A computational program ［TDET］ of the particle transport equation is developed on radiation shielding problem in two-dimensional cartesian geometry based on the discrete element method. Not like the ordinary discrete ordinates method, the quadrature set of angles is not fixed but steered by the spatially dependent angular fluxes. The angular dependence of the scattering source term in the particle transport equation is described by series expansion in spherical harmonics, and the energy dependence of the particles is considered as well. Three different benchmark tests are made for verification of TDET : For the ray effect analysis on a square absorber with a flat isotropic source, the results of TDET calculation are quite well conformed to those of MORSE-CG calculation while TDET ameliorates the ray effect more effectively than S$_{N}$ calculation. In the analysis of the streaming leakage through a narrow vacuum duct in a shield, TDET shows conspicuous and remarkable results of streaming leakage through the duct as well as MORSE-CG does, and quite better than S$_{N}$ calculation. In a realistic reactor shielding situation which treats in two cases of the isotropic scattering and of linearly anisotropic scattering with two groups of energy, TDET calculations show local ray effect between neighboring meshes compared with S$_{N}$ calculations in which the ray effect extends broadly over several meshes.eshes.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1316-1323
• /
• 2012

The present study was conducted to investigate whether myoblasts can be transdifferentiated into adipocytes by ectopic expression of adipogenic transcription factors, including peroxisome proliferator-activated receptor-${\gamma}$ ($PPAR{\gamma}$), CCAAT/enhancer-binding protein-${\alpha}$ (C/$EBP{\alpha}$), sterol regulatory element binding protein-1c (SREBP1c), and Krueppel-like factor 5 (KLF5), in primary bovine satellite cells. Transcription factors were transiently transfected into primary bovine myoblasts, and the cells were cultured with adipogenic differentiation medium for 2 days and then cultured on growth medium for an additional 8 days. Ectopic expression of $PPAR{\gamma}$ or C/$EBP{\alpha}$ alone was insufficient to induce adipogenesis in myoblasts. However, overexpression of both $PPAR{\gamma}$ and C/$EBP{\alpha}$ in myoblasts was able to induce adipogenic transdifferentiation as indicated by the appearance of mature adipocytes, the induction of adipogenic gene expressions, and the suppression of myogenic gene expressions. In addition, KLF5 and $PPAR{\gamma}$ co-transfected bovine myoblasts were converted to adipocytes but not in cells transfected with only KLF5 expression vector. Overexpression of SREBP1c alone was sufficient to induce transdifferentiation from myoblasts into adipocytes. These results demonstrate that primary bovine satellite cells can be transdifferentiated into adipocytes either by single ectopic expression or combined expression of adipogenic transcription factors in a culture system.

• Molecules and Cells
• /
• v.43 no.3
• /
• pp.228-235
• /
• 2020

The Drosophila transmembrane semaphorin Sema-1a mediates forward and reverse signaling that plays an essential role in motor and central nervous system (CNS) axon pathfinding during embryonic neural development. Previous immunohistochemical analysis revealed that Sema-1a is expressed on most commissural and longitudinal axons in the CNS and five motor nerve branches in the peripheral nervous system (PNS). However, Sema-1a-mediated axon guidance function contributes significantly to both intersegmental nerve b (ISNb) and segmental nerve a (SNa), and slightly to ISNd and SNc, but not to ISN motor axon pathfinding. Here, we uncover three cis-regulatory elements (CREs), R34A03, R32H10, and R33F06, that robustly drove reporter expression in a large subset of neurons in the CNS. In the transgenic lines R34A03 and R32H10 reporter expression was consistently observed on both ISNb and SNa nerve branches, whereas in the line R33F06 reporter expression was irregularly detected on ISNb or SNa nerve branches in small subsets of abdominal hemisegments. Through complementation test with a Sema-1a loss-of-function allele, we found that neuronal expression of Sema-1a driven by each of R34A03 and R32H10 restores robustly the CNS and PNS motor axon guidance defects observed in Sema-1a homozygous mutants. However, when wild-type Sema-1a is expressed by R33F06 in Sema-1a mutants, the Sema-1a PNS axon guidance phenotypes are partially rescued while the Sema-1a CNS axon guidance defects are completely rescued. These results suggest that in a redundant manner, the CREs, R34A03, R32H10, and R33F06 govern the Sema-1a expression required for the axon guidance function of Sema-1a during embryonic neural development.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.360-372
• /
• 2010

Concentrations of ambient air particles such as total suspended particulates (TSP), particulate matter $(PM)_{10}$, and $PM_{2.5}$, were monitored simultaneously from May to June, 2007, at four locations at Alashan and Beijing in China, and Seoul and Gosan in South Korea. These monitoring sites are in the pathway of Asian dust (AD) storms traveling from China to the Korean peninsula. An AD event was observed in the Korean peninsula on May 25-26. During the sampling period, the average concentrations of TSP and PM10 were each higher than $150\;{\mu}g/m^3$ in Alashan and Beijing, but not in Seoul and Gosan. The concentration of TSP in Alashan (where the dust storm originated) on the day of the AD event reached $1824.7\;{\mu}g/m^3$, this being the highest concentration of air particles observed during the sampling period. The level was decreased to 15% of this ($274.7\;{\mu}g/m^3$) in Seoul and to 8.7% ($159.0\;{\mu}g/m^3$) in Gosan when the AD was observed two days later in Korea. Gosan, a representative background site in East Asia, displayed the lowest concentration of particles, with this maximal TSP concentration of $159\;{\mu}g/m^3$. Inorganic element contents in the air particles were also measured, and the concentrations in the four different regions compared. Concentrations of anthropogenically-enriched heavy metals in $PM_{10}$ and $PM_{2.5}$, such as lead, arsenic, cadmium, and mercury, were higher in the metropolitan cities of Beijing and Seoul compared to non-industrialized regions of Alashan and Gosan. However, the concentrations of inorganic soil elements including iron, magnesium, aluminum sodium, and manganese, were higher in Alashan compared to those in other sampling sites.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.519-523
• /
• 2004

This study investigates micro-structural and mechanical properties of trabecular bone in human femoral head with and without osteoporosis using Micro-CT and finite element-model. 15 cored trabecular bone specimens with 20min of diameter were obtained from femoral heads with osteoporosis (T-score > -2.5 ) resected for total hip arthroplasty, and 5 specimens were removed from femoral head of cadavers, which has no history of musculoskeletal diseases. A high-resolution micro-CT system was used to scan each specimen to obtain histomorphometry indices. Based on obtained micro-images(pixel size=21.31㎛), a FE-model was created to determine mechanical property indices. While non-osteoporosis group had increases trabecular thickness, bone volume, bone volume fraction, degree of anisotropy and trabecular number compared with those of non-osteoporotic group, the non-osteoporotic group showed decreases in trabecular separation and structure model index. Regarding the mechanical property indices, reaction force, apparent stress and young's modulus were 1ower in osteoporotic group than in non-osteoporotic group. Our data shows salient deteriorations in trabecular micro-structural and mechanical properties in human femoral head with osteoporosis.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.9-17
• /
• 2010

In this study, von Mises stress and total strain energy density characteristics of lead pin in PGA (Pin Grid Array) packages have been calculated by using the FEM (Finite Element Method). FEM computation is carried out with various heat treatment conditions of lead pin material under $20^{\circ}$ bending and 50 mm tension condition. Results show that von Mises stress locally concentrated on lead pin corners and interface between lead pin head and solder. von Mises stress and total strain energy density decrease as heat treatment temperature of lead pin increases. Also, round shaped corner of lead pin decreases both von Mises stress and total strain energy density on interface between lead pin head and solder. This means that PGA package reliability can be improved by changing the mechanical property of lead pin through heat treatment. This has been known that solder fatigue life decreases as total strain energy density of solder increases. Therefore, it is recommended that both optimized lead pin shape and optimized material property with high lead pin heat treatment temperature determine better PGA package reliability.