• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1985-1987
• /
• 2002

Silicon bulk micromachined micromirrors are designed and fabricated for out-of-plane right angle reflection. The micromirror is comprised of a minor plate, springs, magnetic bars and electrodes. Single crystalline silicon is used for a flatness improvement of a mirror plate. Out-of-plane right angle reflection requires a 45 degree operation of the micromirror. The micromirrors are operated by applying a magnetic field, which is generated by a coil located below a substrate. For an individual mirror operation, each mirror is clamped using an electrostatic force against the electromagnetic force. Angular deflections are measured and compared with theoretical data. The micro mirror operates up to 45 degree when magnetic field is 4 kA/m which is generated by a 115 mA coil current Simple addressing is tested, and it is shown that a clamping voltage is less than 5V.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.243-254
• /
• 1996

The main purpose of this study is to investigate the collection efficiency characteristics of a cylindrical ESP. To do that, it is necessary to analyze the electric field, gas flow field, and mechanism of particle movement by numerical simulation based on EHD model. For a gas flow field, Navier-Stokes equation involving the electric source term was solved by SIMPLE algorithm. In case of the electric field, the current continuity and electric field equations were solved by S.O.R. method. The analysis of particle movement was performed on the basis of PSI-CELL model from the Lagrangian viewpoint. The results showed that the influence on the gas flow field by the electric field is almost negligible in a cylindrical ESP. The particle drift velocity $V_P$ toward the collection surface is increased continuously by the electrostatic force due to the rise of particle charge as the particle is moving to the flow direction and the particle size becomes larger. The collection efficiency is to quitely higher with the increase of applied voltage for the same particle size, while becomes smaller as the inlet velocity is increased.

• Coupled systems mechanics
• /
• v.4 no.3
• /
• pp.251-262
• /
• 2015

The current paper aims at investigating the nonlinear dynamical behaviour of an electrically actuated microcantilever. The microcantilever is excited by a combination of AC and DC voltages. The nonlinear equation of motion of the microcantilever is obtained by means of force and moment balances. A high-dimensional Galerkin scheme is then applied to reduce the equation of motion to a discrete model. A numerical technique, based on the pseudo-arclength continuation method, is used to solve the discretized model. The electrostatic deflection of the microcantilever and static pull-in instabilities, due to the DC voltage, are analyzed by plotting the so-called DC voltage-deflection curves. At the simultaneous presence of the DC and AC voltages, the nonlinear dynamical behaviour of the microcantilever is analyzed by plotting frequency-response and force-response curves.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.30-36
• /
• 2003

Driving and pick-off using electromagnetic force for a cylindrical vibratory gyroscope is considered. A gyroscope consisting of thin cylindrical vibrating element and electromagnetic drive and pick-off element is designed, fabricated and tested. The results of the proposed pick-off method were compared with the results of the highly precise laser interferometer and eddy current sensor as it was used as the reference standard. Through the experiment, it is verified that the proposed electromagnetic driving and pick-off method can be an effective alternative to conventional electrostatic or piezo-electric methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.587-595
• /
• 1998

Transient thermal analysis simulations are carried out using a modeling program to understand the human body model HBM ESD. The devices were simulated a one-dimensional device subjected to ESD stress by solving Poison's equation, the continuity equation, and heat flow equation. A ramp rise with peak ESD voltage during rise time is applied to the device under test and then discharged exponentially through the device. LDD and NMOS structures were studied to evaluate ESD performance, snap back voltages, device heating. Junction heating results in the necessity for increased electron concentration in the space charge region to carry the current by the ESD HBM circuit. The doping profile adihacent to junction determines the amount of charge density and magnitude of the electric field, potential drop, and device heating. Shallow slopes of LDD tend to collect the negative charge and higher potential drops and device heating.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.231-237
• /
• 2003

A numerical study has been conducted to investigate the effect of an inlet flow pulsation on mixing of two solutions with different concentrations in a micro conduit. We treat an unsteady, incompressible and two-dimensional flow through a micro conduit by adopting the momentum equations with the electrostatic force due to streaming current and the concentration equation. The feasibility of the inlet flow pulsation to enhance the mixing process inside the micro conduit is carefully examined by varying the inlet pulsation frequency. When a low-frequency pulsation is induced at the inlet, the interface between two solutions with different concentrations becomes wavy, which results in mixing enhancement. As the pulsation frequency increases, the waviness of the interface becomes meager, and the concentration gradients at the interface approach the value for the non-pulsating steady flow.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.80-82
• /
• 1995

The electromagnetic force of magnetic plunger for electromagnetic pump system are calculated by finite element method which consider the eddy current, the plunger motion. The mechanical motion equation are solved Rune-Kutta method, and coupled with the finite element method. With the external circuit equation dynamic simulation of the pump system are achieved. Electrostatic flux is verified by comparing with other commercial analysis software. Similar analysis of other type solenoidal actuators can be done by this procedure.

• Vacuum Magazine
• /
• v.1 no.4
• /
• pp.14-20
• /
• 2014

Since recent electronics technologies have been developed and they tend to spend huge amount of electrical power, self-powered electronics have been paid attention worldwide. To realize self-powered electronics, energy harvesting technology, which generally converts ambient energy into electrical energy, has to be introduced. Among numerous energy sources, mechanical, thermal, and electrostatic event would be of broad interest in field of energy harvesting. Here, this article introduces the promising alternative energy concepts of nanogenerator including piezoelectric, triboelectric, and hybrid types. With these nanogenerators, we are able to apply onto not only self-powered system, but expect these open green energy market.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.17-18
• /
• 2021

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.6-7
• /
• 2020

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data.