• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.499-505
• /
• 2017

Flexible silicon carbide fibrous mats were fabricated by a combination of electrospinning and a polymer-derived ceramics route. Polycarbosilane was used as a solute with various solvent mixtures, such as toluene and dimethylformamide. The electrospun PCS fibrous mats were cured under a halogen vapor atmosphere and heat treated at $1300^{\circ}C$. The structure, fiber morphology, thermal behavior, and crystallization of the fabricated SiC fibrous mats were analyzed via scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermal imaging. The prepared SiC fibrous mats were composed of randomly distributed fibers approximately $3{\mu}m$ in diameter. The heat radiation of the SiC fiber mats reached $1600^{\circ}C$ under microwave radiation at a frequency of 2.45 GHz.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.1.2-4
• /
• 2001

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.258-258
• /
• 2006

Electrospun fibers of poly(vinyl alcohol) (PVA) were successfully prepared and applied as drug carriers for transdermal drug delivery system. Sodium Salicylate (SS) was the model drug and it was incorporated in the PVA fibers by adding 20 % of SS in a PVA solution prior to electrospinning. Electrospinning of SS-containing PVA solution resulted in the formation of beaded fibers. In order to control the rate of SS release and decrease water solubility of PVA, the SS-loaded electrospun PVA mat was cross-linked by either glutaraldehyde or glyoxal vapor. The morphology, thermal behavior, swelling behavior, release characteristic, kinetics of drug release and also toxicity of the cross-linked sample were investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1869-1874
• /
• 2003

Polymeric fibers with nanometer-scale diameters are produced by electrospinning. When the electrical forces at the surface of a polymer solution or melt overcome the surface tension then electrospinning occurs. Polyethylene oxide (PEO), Polycarbonate have been electrospun in our laboratory. Electrospun fibers are observed by optical microscopy or scanning electron microscopy. The average diameters of the electrospun fibers range from 300 nm to 30 nm when the electric field strength increasing from 1 kV/cm to 3 kV/cm. The average diameters of the electrospun fibers range from 200 nm to 30 nm when the concentration decreasing from 10 wt% to 4 wt%.

• Composites Research
• /
• 제29권4호
• /
• pp.186-193
• /
• 2016

The development of electrospun nanofibers with improved mechanical properties is of great scientific and technological interest because of their wide-range of applications. Reinforcement of carbon nanotubes (CNTs) into the polymer matrix is considered as a promising strategy for substantially enhancing the mechanical properties of resulting CNTs/polymer composite mats on account of extraordinary mechanical properties of CNTs such as ultra-high Young's modulus and tensile strengths. This paper summarizes the recent developments on electrospun CNTs/polymer composite mats with an emphasis on their mechanical properties.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1767-1778
• /
• 2010

This study investigates applying $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via electrospinning for the development of UV-protective materials. To fabricate uniform nanocomposite fibers, three types of $TiO_2$ nanoparticles were applied: powder, colloid, and $TiO_2$ coated polymer pellets. $TiO_2$/polyurethane (PU) and $TiO_2$/poly(vinyl alcohol) (PVA) nanocomposite fibers were electrospun and the morphology was examined using a field-emission scanning electron microscope and a transmission electron microscope. Layered fabric systems with electrospun $TiO_2$ nanocomposite fiber webs were developed at various concentrations of $TiO_2$ in a range of the web area density. The effects of $TiO_2$ concentration and web area density on UV-protective properties were examined. When $TiO_2$ colloid was added into a PVA polymer solution, uniform nanocomposite fiber webs in which $TiO_2$ particles were evenly dispersed were produced. Water-soluble PVA nanofiber webs were given a heat treatment to stabilize the electrospun PVA fibrous structure against dissolution in water. $TiO_2$/PVA nanoeomposite fiber webs with 2wt% $TiO_2$ and 3.0g/$m^2$ web area density exhibited an ultraviolet protection factor of greater than 50, indicating excellent UV protection.

• 폴리머
• /
• 제38권4호
• /
• pp.518-524
• /
• 2014

용융전기방사법은 유기용매를 사용하지 않아 용액전기방사법에 비하여 친환경 기술로 관심을 받고 있다. 그러나 용융전기방사법으로 제작된 섬유의 직경은 수 마이크론에서 수십 마이크론에 이르고 있어 그 응용성에 제한을 받고 있다. 본 연구에서는 자체 제작한 용융전기방사 장비를 사용하여 용융점도에 따른 방사섬유의 직경의 변화를 체계적으로 연구하였다. 장비가 허용하는 온도 범위에서 방사 가능한 용융점도를 갖도록 저밀도 폴리에틸렌에 폴리에틸렌모노알콜과 폴리에틸렌 왁스를 혼합하여 실험에 사용하였다. 이 고분자 혼합물들을 사용하여 용융점도의 변화에 따라 수 마이크론에서 수십 마이크론까지의 크기를 가진 고른 표면의 섬유를 제조할 수 있었다. 또한 산화된 폴리에틸렌 왁스를 혼합물에 사용하여 고분자의 극성에 따른 직경의 변화를 관찰하였다. 부가적으로 인가 전압과 방사 거리 등이 방사섬유의 직경에 미치는 영향을 조사하였다.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• 한국의류학회지
• /
• 제35권11호
• /
• pp.1297-1308
• /
• 2011

This research investigates the application of ZnO (zinc oxide) nanoparticles and $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via an electrospinning technique for the development of textile materials that can decompose harmful gases. To fabricate uniform ZnO nanocomposite fibers, two types of ZnO nanoparticles were applied. Colloidal $TiO_2$ nanoparticles were chosen to fabricate $TiO_2$ nano- composite fibers. ZnO/poly(vinyl alcohol) (PVA) and $TiO_2$/PVA nanocomposite fibers were electrospun under a variety of conditions that include various feed rates, electric voltages, and capillary diameters. The morphology of electrospun nanocomposite fibers was examined with a field-emission scanning electron micro- scope and a transmission electron microscope. Decomposition efficiency of gaseous materials (formaldehyde, ammonia, toluene, benzene, nitrogen dioxide, sulfur dioxide) by nanocomposite fiber webs with 3wt% nano-particles (ZnO or $TiO_2$) and 7$g/m^2$ web area density was assessed. This study shows that ZnO nanoparticles in colloid were more suitable for fabricating nanocomposite fibers in which nanoparticles are evenly dispersed than in powder. A heat treatment was applied to water-soluble PVA nanofiber webs in order to stabilize the electrospun nanocomposite fibrous structure against dissolution in water. ZnO/PVA and $TiO_2$/PVA nanofiber webs exhibited a range of degradation efficiency for different types of gases. For nitrogen dioxide, the degradation efficiency was 92.2% for ZnO nanocomposite fiber web and 87% for $TiO_2$ nanocomposite fiber web after 20 hours of UV light irradiation. The results indicate that ZnO/PVA and $TiO_2$/PVA nano- composite fiber webs have possible uses in functional textiles that can decompose harmful gases.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.122-127
• /
• 2004

In this study, we evaluated the effect of the molecular weight of the polymer on electrospun poly(ethylene terephthalate) (PET) nonwovens, and their mechanical properties as a function of the linear velocity of drum surface. Polymer solutions and electrospun PET nonwovens were characterized by means of viscometer, tensiometer, scanning electron microscope(SEM), wide angle X-ray diffraction measurement (WAXD) and universal testing machine (UTM). By keeping the uniform solution viscosity, regardless of molecular weight differences, electrospun PET nonwovens with similar average diameter could be obtained. In addition, the mechanical properties of the electrospun PET nonwovens were strongly dependent on the linear velocity of drum surface. From the results of the WAXD scan, it was found that the polymer took on a particular molecular orientation when the linear velocity of drum surface was increased. The peaks became more definite and apparent, evolving from an amorphous pattern at 0 m/min to peaks and signifying the presence of crystallinity at 45 m/min.