• Resources Recycling
• /
• v.32 no.2
• /
• pp.12-18
• /
• 2023

In 2018, the demand for silver (referred to as Ag) in the electrical and electronics sector was 249 million tons. The demand stood at 81 million tons in the solar module production sector. Currently, due to the rapid increase in solar module installation, the demand for silver is increasing drastically in Korea. However, Korea's natural metal resources and reserves are insufficient in comparison to their consumption, and the domestic silver ore self-sufficiency rate was as low as 2.2% as of 2021. This implies that a recycling technology is necessary to recover valuable metal resources contained in the waste plating solution generated in the metal industry. Therefore, this study compared and analyzed, the results of the impact evaluation through life cycle assessment according to an improvement in the process of recovery of valuable metals in the waste plating solution. The process improvement resulted in reducing GWP (Global Warming Potential) and ADP(Abiotic Depletion Potential) by 50% and 67%, respectively. The GWP of electricity and industrial water was reduced by 98% and 93%, respectively, which significantly contributed to the minimization of energy and water consumption. Thus, the improvement in recycling technology has a high potential to reduce chemical and energy use and improve resource productivity in the urban mining industry.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.215-229
• /
• 2023

Objectives: To validate the effectiveness of a real-time chemical exposure monitoring system developed by KOSHA (Korea Occupational Safety and Health Agency), we applied the system to a workplace in the electronics industry for 153 days. Methods: The monitoring system consisted of a PID chemical sensor, a LTE communication equipment, and a web-based platform. To monitor chemical exposure, four sets of sensors were placed in two manufacturing tasks - inspection and jig cleaning - which used TCE as a degreasing agent. We reviewed previous reports of work environment measurements and conducted a new work environment measurement on one day during the period. The PID sensor systems detected the chemical exposure levels in the workplace every second and transmitted it to the platform. Daily average and maximum chemical exposure levels were also recorded. Results: We compared the results from the real-time monitoring system and the work environment measurement by traditional methods. Generally, the data from the real-time monitoring system showed a higher level because the sensors were closer to the chemical source. We found that 28% of jig cleaning task data exceeded the STEL. Peak exposure levels of sensor data were useful for understanding the characteristics of the task's chemical use. Limitations and implications were reviewed for the adoption of the system for preventing poisoning caused by chemical substances. Conclusions: We found that the real-time chemical exposure monitoring system was an efficient tool for preventing occupational diseases caused by chemical exposure, such as acute poisoning. Further research is needed to improve the reliability and applicability of the system. We also believe that forming a social consensus around the system is essential.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.401-410
• /
• 2023

In this paper, we propose optimization methods for implementing SPARKLE, one of the NIST LWC finalists, on a 64-bit ARMv8 processor. The proposed methods consist of two approaches: an implementation using ARM A64 instructions and another using NEON ASIMD instructions. The A64-based implementation is optimized by performing register scheduling to efficiently utilize the available registers on the ARMv8 architecture. By utilizing the optimized A64-based implementation, we can achieve speeds that are 1.69 to 1.81 times faster than the C reference implementation on a Raspberry Pi 4B. The ASIMD-based implementation, on the other hand, optimizes data by parallelizing the ARX-boxes to perform more than three of them concurrently through a single vector instruction. While the general speed of the optimized ASIMD-based implementation is lower than that of the A64-based implementation, it only slows down by 1.2 times compared to the 2.1 times slowdown observed in the A64-based implementation as the block size increases from SPARKLE256 to SPARKLE512. This is an advantage of the ASIMD-based implementation. Therefore, the ASIMD-based implementation is more efficient for SPARKLE variant block cipher or permutation designs with larger block sizes than the original SPARKLE, making it a useful resource.

• Korean Journal of Artificial Intelligence
• /
• v.11 no.2
• /
• pp.39-44
• /
• 2023

The creativity of thesis is that the significance of cyber security challenges in blockchain. The variety of enterprises, including those in the medical market, are the targets of cyberattacks. Hospitals and clinics are only two examples of medical facilities that are easy targets for cybercriminals, along with IoT-based medical devices like pacemakers. Cyberattacks in the medical field not only put patients' lives in danger but also have the potential to expose private and sensitive information. Reviewing and looking at the present and historical flaws and vulnerabilities in the blockchain-based IoT and medical institutions' equipment is crucial as they are sensitive, relevant, and of a medical character. This study aims to investigate recent and current weaknesses in medical equipment, of blockchain-based IoT, and institutions. Medical security systems are becoming increasingly crucial in blockchain-based IoT medical devices and digital adoption more broadly. It is gaining importance as a standalone medical device. Currently the use of software in medical market is growing exponentially and many countries have already set guidelines for quality control. The achievements of the thesis are medical equipment of blockchain-based IoT no longer exist in a vacuum, thanks to technical improvements and the emergence of electronic health records (EHRs). Increased EHR use among providers, as well as the demand for integration and connection technologies to improve clinical workflow, patient care solutions, and overall hospital operations, will fuel significant growth in the blockchain-based IoT market for linked medical devices. The need for blockchain technology and IoT-based medical device to enhance their health IT infrastructure and design and development techniques will only get louder in the future. Blockchain technology will be essential in the future of cybersecurity, because blockchain technology can be significantly improved with the cybersecurity adoption of IoT devices, i.e., via remote monitoring, reducing waiting time for emergency rooms, track assets, etc. This paper sheds the light on the benefits of the blockchain-based IoT market.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.611-613
• /
• 2021

Recently, research and development of quantum computers, which exceed the limits of classical computers, have been actively carried out in various fields. Quantum computers, which use quantum mechanics principles in a way different from the electrical signal processing of classical computers, have various quantum mechanical phenomena such as quantum superposition and quantum entanglement. It goes through a very complicated calculation process compared to the calculation of a classical computer for performing an operation using its characteristics. In order to utilize each element efficiently and accurately, it is necessary to visualize the data before driving the actual quantum computer and perform error verification, optimization, reliability, and verification. However, when visualizing all the data of various elements configured inside the quantum computer, it is difficult to intuitively grasp the necessary data, so it is necessary to visualize the data selectively. In this paper, we visualize the data of various elements that make up a quantum computer, and hierarchically visualize the internal circuit components of a quantum computer that are complicatedly configured so that the data can be observed and utilized intuitively.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.127-134
• /
• 2023

The god of water, Baltara (Bhadra: in the northern part of India), Tammola Around 563-483, he came to Tamra with 900 Arhats (BC483-AD1105, during the reign of King Sukjong of Goryeo, the kingdom of Tamra became Hangun-hyeon in Goryeo). It is the spread of Buddhism through the world's most sacred water (Heiligkeit, one of the four elements water, fire, air, and earth) and the world's largest Arhat The reverse of Halla, appendix: to find the stone statue of Buddha at Seogo Temple in Jeonju, Hwangbangsan. Since ancient times, Jeju people have called Truth Mt. that Mt. Halla protects against typhoons blowing from the south. It looks like it has been hardened by fire. On the coming day, the greatest breath of Venerable Baltara in Jeju is Olle Road No. 1 from Siheung-ri, Seongsanpo to No. 26 Gujwa-myeon Jongdal-ri. It is the Oval Jeju "Road Way" that clearly shows "the beginning is the end, and the end is the beginning" of Cheonbugyeong.

• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.151-163
• /
• 2023

This study explored the 2022 drought over the Nakdong River watershed. Here, we developed a bivariate regional frequency analysis method to evaluate the risk of hydrological drought. Currently, natural streamflow data are generally limited to accurately estimating the drought frequency. Under this circumstance, the existing at site frequency analysis can be problematic in estimating the drought risk. On the other hand, a regional frequency analysis could provide a more reliable estimation of the joint return periods of drought variables by pooling available streamflow data over the entire watershed. More specifically, the Copula-based regional frequency analysis model was proposed to effectively take into account the tail dependencies between drought variables. The results confirmed that the regional frequency analysis model showed better performance in model fit by comparing the goodness-of-fit measures with the at-site frequency analysis model. We find that the estimated joint return period of the 2022 drought in the Nakdong River basin is about eight years. In the case of the Nam river Dam, the joint return period was approximately 20 years, which can be regarded as a relatively severe drought over the last three decades.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.443-458
• /
• 2008

Brominated flame retardants (BFRs) are chemical compounds that inhibit the combustion of organic materials by scavenging free radicals that would otherwise encourage the spread of flames. These compounds are found in a wide variety of materials including paints, plastics, textiles, furniture and electronics. Mounting evidence, however, suggests that the non-reactive BFRs can easily leach into the environment and pose significant environmental and health concerns. PBDDs/PBDFs are often formed in the process of manufacturing brominated flame retardants and from the combustion of waste products containing flame retardants BFR. Therefore, this paper describes the general characteristics, management status, residual concentration in environments and analytical method.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.3-12
• /
• 2022

In general construction project planning ratio of manpower and quantity of outputs produced, such as the construction estimate standard, is used as the criterion for labor productivity. This method is highly effective in construction projects with repetitive work, however, there is a limit to apply in large-scale projects with high complexity. This is because the influence of non-work time caused by various work interruption factors that act complexly on the productivity of the project is greater than the average labor productivity derived from the performance data of the project. Therefore, this study proposes a productivity measurement method that can evaluate the characteristics of construction works and the cause of non-working time. To this end, first, detailed work processes and their non-work factors for each work type are defined, and the Adv-FMR technique is developed for quantitatively measuring them. Next, based on the concept of obtainable productivity, methods for comparative productivity analysis by work type, evaluating non-work factors, and deriving productivity improvement methods are proposed. Finally, a case study is conducted to validate that the analysis results based on Adv-FMR data can support the decision-making of construction managers on productivity management.

• 재활복지
• /
• v.15 no.4
• /
• pp.351-375
• /
• 2011

The purpose of this study is to research the actual condition of on-line and off-line computer education in order to create more opportunities for the possibility of effective learning and u-Learning - based IT vocational education development of persons with hearing impairments. To carry out this study, we had a preliminary education of this study for a sign language interpreters who had working in a association of the deaf in Daegu, and had conducted a survey study participating for 100 persons with hearing impairments living in Daegu-Kyungbook Region. The results of this study were as follows: First, during on-line and offline education environment for persons with hearing impairments, factors such as teaching methods and contents, screen organization, learning effects, offering lecture material and subtitle, subtitle and sign language video of position and size, offering computer instructor who have a sign language interpreter with IT mentoring, on-line educational user environment setting must be considered factors for u-Learning - based IT vocational education development. Second, 74% of the subjects showed their interest in taking a course, after u-Learning contents are developed for persons with hearing impairments. Third, the subjects preferred IT device was a tablet PCs and IT certification related courses as their IT vocational education curriculum. Also, to link between professional training and job opportunity, subjects will need a IT vocational education courses such as computer intermediate and advanced levels.