• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.358-359
• /
• 2008

The heat generated in the high-Tc superconducting (HTS) devices is related with the cost efficiency and safe factor of HTS devices. This paper deals with the quench at the conduction-cooled joint between the HTS wire and copper terminals. The 3-D numerical simulation of this phenomenon was implemented and compared with the experimental results. The experiment was implemented with the HTS wire mounted on the copper blocks cooled with a Gifford McMahon (GM) cryocooler.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.281-285
• /
• 2007

Facilities of electric railway should be maintained only at night and it is necessary to maintain by human power because facilities are installed at a high place. This paper presents the development and application of a real-time data acquisition system for the characteristics measurement of overhead contact wires in electric railway. The system is designed to perform in the telemetry environments that developed to store data by wireless in a live wire state of 25 kV power source. The field test results show that the proposed technique and the developed system can be practically applied to measure characteristics of temperature, displacement, and strain on overhead contact lines.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.415-420
• /
• 2013

The new recycling technology for aged Aluminum wires in overhead conductor have been carried out. We are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The weld of aged aluminum wires play a vital role in remanufacture process. The paper investigates the mechanical properties during cold welding process of aged Aluminum wire. The tensile tests and microscopic analysis results are discussed to underscore the hardening features of welded aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.272-273
• /
• 2015

This paper analyze scenario of feeder wire fault that occurs in the AC feeding system considering train position. The fault location of AC feeding system is calculated by measuring impedance. However, in this way, estimation error can be occurred because of tie connection, boosting current, etc. Therefore, it's hard to find fault location, so that it is required to detailed circuit analysis according to fault location. We analyze the short circuit impedance values with respect to feeder wire fault according to a train position. In this paper, PSCAD is used for modeling and analysis of AC railway feeding system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1268-1272
• /
• 2003

In order to enhance current Injection efficiency of Y-groove inner strife(VIS) quantum wire lasers, three different current configurations, n-blocking on p-substrate(VIPS), p-n-p-n blocking on n-substrate(VI(PN)nS), p-blocking on n-substrate(VINS) have been designed and fabricated. Among them VIPS laser showed the most stable characteristics of lasing up to 5 mW/facet, a threshold current of 39.9 mA at 818 nm, and an external differential quantum efficiency of 24 %/facet. The current tuning rate was almost linear 0.031 nm/mA, and the temperature tuning rate was measured to be 0.14 nm/$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.37-40
• /
• 2002

Superconductor wire fabricated by electrophoresis showed its critical current density depended on parameters such as applied voltage and deposition time. Substrate and suspension solutions. and its properties are also important parameters. When same optimal parameter and condition was used, deposition density of superconductor film affect directly its critical current density. In this study, therefore, electrophoretic deposition technique was utilized for a densification of YBCO superconducting wire, and researches on electrophoretic suspension solutions and additive were experimentally performed for an improvement of the critical current density of fabricated electrophoretically superconducting wire. The samples fabricated in the solution with the additive, 8 vol.% of 1% PEG(1000), showed the highest critical current density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.488-491
• /
• 2000

Bi-2223/Ag superconducting wires have been mainly prepared by a powder-in-tube method. The drawing and the rolling are main processes to increase the core density and wire length. In the fabrication of long wire, especially, the drawing should be precisely controlled to assure the filament homogeneity. In this paper, the influences of drawing die angle, bearing length and reduction ratio on the sausaging and the critical current density of the wire are investigated. Single cored and multi-filamentary wires are fabricated by PIT method with different conditions. The core densities and sausaging in the wires are investigated and are discussed regarding their relationship to the I$_{c}$. It was made clear that the geometry of drawing die is sensitively dependent on the sausaging. The improvement of I$_{c}$ was achieved by reducing the die angle and high core density.ity.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.175-181
• /
• 1992

Y-Ba-Cu-O계 보다 화학적 내구성이 좋은 Bi-Sr-Ca-Cu-O계 초전도체 wire를 중합 binder와 초전도체 파우더를 혼합하여 sol-gel법으로 제조하였다. 여러가지 혼합비와 열처리 조건하에서 제조한 wire의 특성분석 결과 Bi$_{2}$Sr$_{2}$Ca$_{2}$Cu$_{3}$O계 초전도체와 binder의 최적 혼합율은 22.25%이었고 가열비는 0.33.deg.C/min로 500.deg.C까지는 Ar gas와 $O_{2}$ gas분위기로 열처리하고 500.deg.C에서 835.deg.C까지는 $O_{2}$ gas분위기에서 40h동안 열처리하였을때 임계온도 98K를 갖는 초전도 선재를 얻을 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.445-447
• /
• 2000

The terminal and core(wire conductor) in a Harness processing is connected by putting them in a applicator by virtue of a manual operation. A normal or abnormal condition of crimping connections is nearly determined by a skilled worker. In general, a skilled worker operates a press motor with a foot switch by pressing on foot and puts a wire conductor into a press with one hand. By doing so, sufficient efficiency is not obtained by a worker. In this paper, a basic study has done to make improve an efficiency by finding the normal arrangement out as to whether a terminal and wire conductor in Harness are placed on the right position or not with a quadrant plane photo position sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.58-61
• /
• 2016

Degradation in power cables used in distribution lines to the material of the wire, manufacturing method, but also the line of the environment, generates a variety of degradation depending upon the type of load. The local wire deterioration weighted wire breakage accident can occur frequently, causing significant proprietary damage can lead to accidents and precious. In this study, the signal detected by the eddy current aim to develop algorithms capable of determining the signals for the top part and at least part of the signal by using a signal processing technique called K-means algorithm.