• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.420-426
• /
• 2024

This study proposes an innovative methodology for developing flexible printed circuit boards (FPCBs) capable of conforming to three-dimensional shapes, meeting the increasing demand for electronic circuits in diverse and complex product designs. By integrating a traditional flat plate-based fabrication process with a subsequent three-dimensional thermal deformation technique, we have successfully demonstrated an FPCB that maintains stable electrical characteristics despite significant shape deformations. Using a modified polyimide substrate along with Ag flake-based conductive ink, we identified optimized process variables that enable substrate thermal deformation at lower temperatures (~130℃) and enhance the stretchability of the conductive ink (ε ~30%). The application of this novel FPCB in a prototype 3D-shaped sensor device, incorporating photosensors and temperature sensors, illustrates its potential for creating multifunctional, shape-adaptable electronic devices. The sensor can detect external light sources and measure ambient temperature, demonstrating stable operation even after transitioning from a planar to a three-dimensional configuration. This research lays the foundation for next-generation FPCBs that can be seamlessly integrated into various products, ushering in a new era of electronic device design and functionality.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.187-192
• /
• 2013

노즐을 이용한 인쇄 기법은 주로 전자 소자의 봉지를 위한 접착제의 인쇄분야에 적용되어 왔다. 노즐 인쇄를 통한 기능성 물질의 필름 형성은 커다란 도전이 될 수 있다. 본 논문에서는 노즐을 이용한 유기 잉크의 인쇄 특성을 실험을 통하여 알아보았다. 본 연구의 노즐 인쇄 실험에서 패턴을 형성하기 위한 잉크는 유기 발광 물질인 TAPC를 사용하였다. 인쇄된 패턴 폭은 잉크 공급 유량의 증가와 기판의 온도의 상승에 따라 증가하였다. 또한 인쇄된 패턴은 건조 후 커피링 형상을 나타내었다.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1123-1130
• /
• 2011

The pattern shape engraved on the gravure printing roll is one of the most important factors influencing ink transfer. This study focuses on the relations between dot geometry engraved on gravure printing roll and the ink transfer during the gravure printing process. The influence of dot width on printed patterns will be demonstrated. Results reveal that as the width of a dot on the printing roll increases, the ink transfer rate also increases. But over a certain size of width, surface uniformity began to recede. Therefore, proper dot geometry on the printing roll should be decided to guarantee good printing quality according to printing conditions and expected performance of the electronic devices.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 국제표면실장 및 인쇄회로기판 생산기자재전:전자패키지기술세미나
• /
• pp.65-91
• /
• 2003

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.454-462
• /
• 2023

금속 나노 입자의 플래시 램프 어닐링 공정은 빠른 가공 속도(밀리초 단위), 저온 공정, 롤투롤 공정과의 호환성 등 이유로 유연한 기판 위에 고성능 전극을 제조하기 위한 강력한 솔루션으로 제공되어 왔다. 그러나 금속 나노 입자[예를 들면, 금(Au), 은(Ag), 구리(Cu) 등]는 저온 공정을 위한 미세 금속 나노 입자(직경 10 nm 미만)의 제조가 어렵고, 고가이며, 잉크보관 및 플래시 램프 어닐링 과정에서 산화가 발생하는 등의 한계가 존재했다. 이러한 이유로 유기금속화합물 잉크는 금속 나노 입자를 대체할 수 있는 재료로서 저렴한 가격(기존 금속 나노 잉크 대비 1/100의 가격)과 저온 공정성, 높은 재료 안정성으로 인해 제안되었다. 하지만 이러한 장점에도 불구하고, 유기금속화합물의 플래시 램프 어닐링 처리를 통한 유연한 전극의 제조는 광범위하게 연구되지 않고 있다. 본 논문에서는 사전 경험 없이 은 유기금속화합물을 플래시 램프 어닐링하는 과정에서 발생할 수 있는 어려움을 최소화하기 위해 재료 매개변수와 플래시광 처리 매개변수(에너지 밀도, 펄스 지속시간 등)를 고려하여 유연 기판에 전극을 제조하기 위한 최적의 조건을 결정하는 방법을 실험적으로 가이드하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.992-998
• /
• 2009

We investigated the influence of organic solvents on the droplet properties of 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS-pentacene), which was used for semiconductor of organic thin film transistors (OTFTs) and deposited by ink jet printing. From the result of the investigation, the conditions of a suitable solvent is that boiling point should be above $200^{\circ}C$ to reduce coffee stain and the surface tension above 32 dyn/cm to decrease the droplet size. Consequently, we selected tetralin which have a high boiling point ($207^{\circ}C$) and high surface tension (34.3 dyn/cm) as the solvent for TIPS-pentacene, and applied it to OTFTs. In fabrication process the conventional bank process employing photolithography and etching process was replaced by ink jet printed bank process, resulting in simplifying the process. Especially, polyvinylphenol was used for the bank, and the high hydrophobicity could improve the confinement of TIPS molecules inside the bank, enhancing the performance over the conventional hydrophilic polyvinylalcohol bank. The mobility was $0.18\;cm^2/Vs$, current on/off ratio $2.09{\times}10^5$, subthreshold slope 0.42 V/dec, and off state current $0.049\;pA/{\mu}m$.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.462-467
• /
• 2013

In this paper, we analyzed the effects of doctoring process on the patterns of Ag ink in gravure off-set printing. The parameters of doctoring process were the angle and the pressure, which was represented by the depth of blade movement to the gravure roll, of doctor blade to the surface of gravure roll, and the angle of patterns engraved on the gravure roll to the doctor blade moving direction. The proper parameters were extracted for the fine patterns and they were 15 mm for the pressure, $60^{\circ}$ for the blade angle. And the angle of patterns with respect to the blade movement should be less than $40^{\circ}$ for the best results. The gravure off-set printing with the above parameters was carried out to print gate electrodes and scan bus lines of OTFT-backplane for e-paper. The line width of $50{\mu}m$ was successfully obtained. The thickness of electrodes was $2.5{\mu}m$ and the surface roughness was $0.65{\mu}m$ and the sheet resistance was $15.8{\Omega}/{\Box}$.

• 한국멀티미디어학회논문지
• /
• 제20권6호
• /
• pp.882-892
• /
• 2017

Locally Likely Arrangement Hashing (LLAH) is a method that describes image features based on the geometry between their neighbors. Thus, it has been preferred to implement augmented reality on poorly-textured objects such as text documents. However, LLAH strongly requires that image features be detected with high repeatability and located at a distance from one another. To fulfill the requirement for text document, this paper proposes a method that facilitates the word detection in infrared (IR) range by adjusting the IR-reflectance of words. Specifically, the words are printed out with two different black inks: one is using the K(carbon black) ink only, the other is mixing the C(cyan), M(magenta), Y(yellow) inks. Since only the words printed out with the K ink is visible in IR range, a part of words are selected in advance to be used as features and printed out the K ink. The selected words can be robustly detected with high repeatability in IR range and this enables to implement augmented reality on text documents with high fidelity. The validity of the proposed method was verified through experiments.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1600-1603
• /
• 2009

In this work, we have fabricated inverted staggered ZnO TFTs with 1-${\mu}m$ resolution channel length by micro contact printing (${\mu}$-CP) method. Patterning of micro scale source/drain electrodes without etching is successfully achieved by micro contact printing method by using silver ink and polydimethylsiloxane (PDMS) stamp. And the time dependent characteristics of the sheet resistance show that Ag inklayer could be used as source and drain electrodes for ZnO TFTs.