• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2428-2434
• /
• 2012

본 논문은 제동 시스템에서 전자식 주행안정 제어장치(ESC)의 유압 모듈레이터의 솔레노이드 밸브 제어에 대한 것이다. ESC의 전자제어유니트(ECU)를 제어하기 위한 방법으로 고주파수 제어와 슬로프 제어를 적용하였으며, 서지 압력 및 전자파간섭(EMI) 저감 특성을 연구하였다. 고주파수에서의 전자파 방출을 줄이기 위하여 ECU 출력 단에 슬로프 제어 기능을 추가하였다. 측정결과 제동 시스템에서 고주파수 ECU의 솔레노이드 밸브제어 방법에 따라 서지 압력과 전자파 방출이 저감될 수 있음을 확인하였다. 결론적으로 고주파수 ECU 제어 연구 결과에 의해 제동 시스템 성능을 향상방안을 제시하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.507-509
• /
• 2022

자동차 내부 진단 데이터를 수집하기 위해서는 다양한 자동차 부품에 포함되어 있는 ECU(Electronic Control Unit)의 진단데이터를 수집하여야 한다. ECU의 진단데이터를 수집하기 위해서는 진단통신을 활용할 수 있다. 본 논문에서는 표준 진단 통신을 통해 ECU의 기능에 따른 진단데이터를 수집하는 방법과 진단통신 모듈에 대해서 분석하였다. 많은 자동차 제조사가 사용하는 자동차 전장 표준인 AUTOSAR의 표준 모듈 중에서 진단 통신 모듈에 대해서 연구하였으며, 진단데이터 처리가 ECU를 통해 처리되는 과정에 대해서 연구하였다.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.113-119
• /
• 2015

The technical development of electric vehicles has been actively proceeding because of the reduction of oil resources and need for eco-friendly vehicle technology. In particular, an electronic control unit is an important element in the technology of electric vehicles due to the motor drive system. This paper concerns an experimental study on the thermal analysis of the steering control ECU structure for an electric vehicle. The ECU unit is designed for eight heat sinks for the thermal analysis of the ECU structure. The thermal analysis characteristics of the ECU structure are evaluated by the temperature distribution, heat flow, von Mises stress, total translation, and external surface temperature measurement of the ECU unit.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.58-63
• /
• 2020

The fuel injection amount and timing along with the ignition timing for the gasoline engine of a racing car were adjusted using an electronic control unit (ECU), and the engine performance was evaluated through an acceleration test. The fuel map for the fuel injection amount and ignition map for the ignition timing were derived. Using the transient throttle control, the air-fuel ratio could be maintained at a constant value even in the case of a sudden throttle operation. In the flat shift, ignition blocking was more effective than fuel blocking. In a 75 m acceleration test, the required duration without and with ECU control was 4.47 s and 3.99 s, respectively. Notably, the acceleration could be improved by approximately 10.7% when the ECU control was implemented.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.30-35
• /
• 1999

Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.267-270
• /
• 2021

자동차 진단을 위해서는 자동차 전자 장치인 ECU(Electronic Control Unit)로 구성된 전자 장치를 통해 다양한 통신방식을 활용하여 ECU 내 또는 ECU 간 진단 데이터를 수집하고 진단데이터를 관리하여 이뤄지고 있다. 통신 방식으로는 LIN, CAN, FlexRay 등이 주로 사용되고 있다. 최근에는 Ethernet 기반으로 유선/무선 통신을 활용하고 있다. 자동차 진단을 수행하려면 ECU에서 발생되는 진단코드를 알고 있어야 하고, 진단통신을 이용하여 진단 데이터를 수집할 수 있어야 가능하다. 또한, 자동차 진단에 필요한 응용소프트웨어가 구성되어야 ECU로부터 진단데이터를 관리할 수 있다. 많은 자동차 제조사가 자동차 전장 표준인 AUTOSAR 표준을 기반으로 ECU를 제작하고 있으면, 소프트웨어 구조 또한 표준에 따라 적용될 수 있도록 구성되어 있다. 본 논문에서는 AUTUSAR 표준의 자동차 진단 통신 방식을 이해하고 진단 데이터 구성과 처리 방식에 대해서 연구하였으며, 소프트웨어 컴포넌트와 진단통신, 진단 이벤트 처리에 대한 내용에 대해서 연구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1061-1062
• /
• 2010

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2013

Remanufacturing of automobile parts is important for increasing the recycling resources. ECU(Electronic Control Unit) systems are becoming an increasingly important part of an automobile. But production company are reported in the ECU remanufacturing industry of domestic automobile parts due to a lack of remanufacturing technology and marketability. This paper introduces the ECU of remanufacturing, also grasps the structure and the analyzes failure cause that is external factors and fault in the characteristic design and steps in the Independent ECU remanufacturing process. The ECU manufacturing industry of the US was examined. The results in this paper could be used as the system information for further remanufacturing industry of domestic automobile parts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.