• 한국전자통신학회논문지
• /
• 제9권4호
• /
• pp.439-446
• /
• 2014

본 연구는 디지털위성중계기의 우주인증 모델에 대한 성능분석 및 구현에 대해 기술하였다. 사전 성능 분석은 각 구성품 회로 시뮬레이션을 통해 각 구성품에 대한 요구 규격 대비 만족 여부를 사전 검증하고, 각각의 구성품을 순서대로 연결하여 전체적인 디지털위성중계기의 요구 규격에 만족하는지를 사전 검증하였다. 사전 시스템 성능 분석을 통하여, 각 구성품의 요구 규격을 정의하고, 그 규격을 바탕으로 제작하였으며, 최종적으로 시스템 통합하여 전체적인 디지털위성중계기의 성능 측정을 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1519-1528
• /
• 2017

The paper proposes a well structured, component count waned single phase multilevel inverter (MLI) topology, which drives three different modules viz. Stipulation Based Sources Insertion (SBSI) module, Level Count Increasing (LCI) module and Inter-Linking H-Bridge (ILHB) module. The SBSI module confronts the number of basic sources needed in series/parallel to achieve required magnitude for any particular level. The LCI possesses an offsetting dc source and opuses to increase the number of levels and the ILHB module links the SBSI and LCI modules. A developed Hybrid Pulse Width Modulation (HPWM) strategy has PWM pulses for the switches of LCI module while the switches of the remaining two modules function at fundamental switching frequency. A fifteen level version of the proposed stipulation based sources insertion MLI (SBSIMLI) topology is simulated in MATLAB R2010a and a prototype of the similar specifications is constructed to validate the performance by experimental results. The comparison between the developed SBSIMLI topology and the competent topologies shows many interesting facts.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.817-821
• /
• 2017

As a ZnO varistor is subjected to electrical and environmental stresses, it degrades gradually, which may result in power interruption by short circuit. This study investigates changes in the electrical characteristics of ZnO varistors due to deterioration owing to energy absorption, and determines the optimal parameters for on-line diagnosis of the varistor. Two types of varistors were used for an accelerated aging experiment involving the application of the $8/20{\mu}s$ standard lightning impulse current. The electrical characteristics in terms of the reference voltage, total leakage current, resistive leakage current, and third-harmonic component of the total leakage current were measured, and their change rates were analyzed. The results revealed that the total leakage current increased slightly with an increase in the varistor absorbed energy, while the resistive leakage current and the third-harmonic component increased apparently. Therefore, the third-harmonic component of the total leakage current was proposed as the optimal parameter for on-line monitoring of ZnO varistor conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.65-68
• /
• 2001

In the vector control methods of induction motor, the stator current is divided into the flux and torque component current. By controlling these components respectively, the methods control independently flux and torque as in the DC motor and improve the control effects. To apply the vector control methods, the position of the rotor current is identified. The indirect vector control use the parameters of the machine to identify the position of rotor flux. But due to the temperature rise during machine operation, the variation of rotor resistance degrades the vector control. To solve the problem, the q-axis is aligned to reference frame without phase difference by comparing the real flux component with the reference flux component. Then to compensate the slip, PI controller is used. The proposed method keeps a constant slip by compensating the gain of direct slip frequency when the rotor resistance of induction motor varies. To prove the validations of the proposed algorithm in the paper, computer simulations is executed.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.195-201
• /
• 2012

센서노드와 관제시스템으로 구성된 환경정보모니터링시스템은 센서노드에서 실시간 정보를 수집하고 원격지의 관제시스템으로 수집된 데이터를 실시간 전송한다. 센서 노드에 설치되는 센서의 종류, 센서의 개수, 센서노드와 관제시스템 사이의 통신환경, 관제시스템 데이터 운영 환경에 따라 관제시스템의 운용성이 크게 저하될 수 있다. 따라서 본 연구에서는 운영 효율성을 증대하기 위하여 운용환경에 따라 적절한 컴포넌트를 이용하는 컴포넌트 기반 환경정보모니터링시스템을 제안하고 구현하였다.

• 한국전자통신학회논문지
• /
• 제8권9호
• /
• pp.1299-1305
• /
• 2013

이 논문에서 우리는 MFCC 특징벡터의 차원 저감을 통해 음성 인식에서의 계산량을 줄이는 방법을 조사한다. 특징벡터의 특성분해는 벡터의 성분을 분산의 크기에 따라 배치되도록 선형 변환 시켜준다. 첫 번째 성분은 가장 큰 분산을 가져서 패턴 분류에서 가장 중요한 역할을 한다. 따라서, 분산이 작은 성분들을 제외시키는 차원 저감을 통하여, 계산량을 줄이면서 동시에 음성 인식 성능을 저하시키지 않는 방법을 생각할 수 있다. 실험 결과, MFCC 특징벡터의 성분을 절반 정도로 줄여도 음성인식 오류율에 큰 악영향이 없음이 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.455-456
• /
• 2007

Optically transparent, highly conductive coating have been major theme of thin film science efforts for some years. In this work, t-MWNT(thin Multi-walled Carbon Nanotubes) are acid treated, then the stable dispersion of t-MWNTs in polar solvent such as alcohols, was achieved by sonication. The transparent conducting films are prepared using the one component solution of t-MWNT/epoxy binder via spray coating on glass substrate. The characterization of acid treated t-MWNTs was performed by Raman spectrometer. The opto-electrical properties of conducting films are analyzed by the binder concentration, and the effect of co-solvent on the compatibility and dispersibility of one component t-MWNT/epoxy binder solutions are discussed.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.138-144
• /
• 2021

전자부품 조립사업은 제품불량이 발생했을 때, 입고된 원자재불량 또는 작업불량을 추적하는 것이 중요하며, 결과에 따라 납품업체 또는 작업현장 개선이 중요하다. 스마트팩토리의 핵심 과제는 데이터 통합허브를 구축하여 저장·관리·분석을 실시간으로 처리하고 클러스터공정, 에너지, 환경, 안전을 통합관리 하는 것이다. 전자부품 관련 중소기업에 생산현장관리를 실시간 모니터링하여 생산데이터의 정확한 분석과 수집으로 신뢰도를 향상시키기 위해서는 스마트팩토리 구축이 필수적이다. 본 논문은 스마트팩토리를 도입하고자 하는 전자 부품관련 중소기업의 특성을 고려해 시스템 구성방법, 스마트팩토리 관련기술 과 적용사례 등을 정의하여 구축에 활용토록 개발되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.250-252
• /
• 1996

In this paper, the principle of operation. the part characteristic, characteristic of component movement, analysis are carried out for camcoder iris assembly which is one of the important element component in Video large projection TV instrument, and some Know-how for development of element component is also included. The magnetic field circuit for the small and simple structure with low power consumption is introduced and new materials of yoke for small motor system is suggested. Especially, the relation with remained magnetic field and operation duration time is analyzed by experimental results. Some problems of nonlinear torque characteristics include to obtain the simple and low cost structure in domestic production of element component is analyzed. Furthermore, development procedure is suggested for iris assembly and some methods to reduce the burr with some check points for small precise accessories are explained.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.741-743
• /
• 2003

A surface mount machine operation policy to assemble printed circuit boards is being developed in this research. The policy includes how to assign electronic components to slots on a component rack, and how to determine placement sequences on printed circuit board. The suggested heuristic uses information about component types and closeness relationships in each component on the board to assemble. First, the size of components and closeness ratings are used to divide them into two different size groups. Then rack assignment and placement routes are developed using component type and quantity information for a small size group, and followed by a large size group. Simulation models are developed using Visual C++ for performance evaluation of the heuristic. Necessary statistical analyses are provided to show the effectiveness of the suggested heuristic.