• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.646-654
• /
• 2010

This paper describes an integrated chassis control for a maneuverability, a lateral stability and a rollover prevention of a vehicle by the using of the ESC and AFS. The integrated chassis control system consists of a supervisor, control algorithms and a coordinator. From the measured and estimation signals, the supervisor determines the vehicle driving situation about the lateral stability and rollover prevention. The control algorithms determine a desired yaw moment for lateral stability and a desired longitudinal force for the rollover prevention. In order to apply the control inputs, the coordinator determines a brake and active front steering inputs optimally based on the current status of the subject vehicle. To improve the reliability and to reduce the operating load of the proposed control algorithms, a multi-core ECU platform is used in this system. For the evaluation of this system, a closed loop simulations with driver-vehicle-controller system were conducted to investigate the performance of the proposed control strategy.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.335-341
• /
• 2010

전기제동 시스템(Electric braking system)은 기존 자동차 시스템에서 사용된 유압 브레이크를 대신하여 전동기를 이용하여 제동력을 얻게 된다. 전기제동은 기존 유압식에 비해 부품의 수가 감소되며 ABS, ESC 등의 응답성 향상 및 제동거리 감소효과를 얻을 수 있다. 본 논문에서는 EMB(Electro-Magnetic Brake)용 BLAC 전동기의 제어기를 개발하였다. 제어 시스템은 BLAC 전동기 구동을 위한 전력변환장치와 속도제어를 위한 디지털제어기로 구성되었으며, 빠른 토크 응답특성을 위해 벡터제어 기법을 적용하였다. 또한 Matlab/Simulink를 이용한 시뮬레이션 및 실험 결과를 제시하여 EMB용 BLAC 전동기의 성능을 검증하였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.14-19
• /
• 2012

On-line and real-time information of the longitudinal velocity is the essential factor for the Advanced Vehicle Control Systems such as ABS(Anti-lock Brake System), TCS(Traction Control System), ESC (Electronic Stability Control) etc. However, the longitudinal velocity cannot be easily measured or calculated during braking maneuvering. A new algorithm is presented for the estimation of the longitudinal velocity with the measurements of the vehicle longitudinal/lateral acceleration, steering angle and yaw rate. The algorithm is designed utilizing the Extended Kalman Filter based on the 3 degree of freedom vehicle model. In order to compensate for the biased sensor signal on the inclined road, the inclined angle is also estimated. The performance of the proposed estimation algorithm is evaluated in field tests.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.315-321
• /
• 2014

본 논문은 전자제어식 조향 및 제동 장치를 장착한 차량에 대해 고장 안전 기능을 가지는 통합 섀시 제어 시스템을 제안한다. 통합 섀시 제어 시스템에서 상위 제어기는 슬라이딩 모드 제어 이론을 이용하여 제어 요모멘트를 만들어 낸다. 하위 제어기는 가중 의사-역행렬 기반 제어 분배 방법(WPCA)으로 제어 요모멘트를 전자제어식 조향 및 제동 장치의 타이어 힘으로 분배한다. WPCA 의 가변 가중치를 조절하여 구동기 혹은 센서의 고장에 대처할 수 있다. 이러한 상황에서 WPCA 방법으로 가변 가중치를 최적화하여 요모멘트 분배 성능을 향상시키기 위해 시뮬레이션을 이용한 최적화 방법을 제안한다. 제안된 방법의 타당성을 검증하기 위해 차량 시뮬레이션 패키지인 CarSim 에서 시뮬레이션을 수행한다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.18-26
• /
• 2016

This research is conducted to develop an automatic steering system for parallel parking, and the performance of the system was evaluated by parallel parking a conventional vehicle. The automatic steering system consisted of MDPS (motor driven power steering) to control steering, ESC (electronic stability control) to acquire wheel speed, ultrasonic sensors to recognize the parking space, and a controller to communicate and handle data. The parallel parking process using the automatic steering control consisted of parking space recognition, parking path generation, and parking path tracking. The path for parallel parking was generated based on a kinematic model of a conventional vehicle, and a PI controller was used to control the steering angle for path tracking. Parallel parking using the automatic steering control was conducted according to vehicle speed conditions. The results show that the errors on the x-axis and y-axis were below 0.54 m and 0.14 m, respectively, and the error on the steering angle was less than $1^{\circ}$. Therefore, it is possible to implement parallel parking using an automatic steering control system for conventional vehicles.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.30-36
• /
• 2011

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA Sine with dwell steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes useful worst case based upon the existing worst case scenarios mentioned above and worst case evaluation for vehicle dynamic controller in simulation basis and UCC HILS. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of both yaw rate and side slip angle. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle dynamic control system.