The Transactions of the Korean Institute of Power Electronics (전력전자학회논문지)

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

BLAC Drive System for Electro-Magnetic Brake

Electro-Magnetic Brake를 위한 BLAC 구동시스템

  • Received : 2009.08.17
  • Accepted : 2010.07.25
  • Published : 2010.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

The electric braking system obtains its braking force by a motor instead of the hydraulic brake which has been used in conventional automobile systems. Electric braking system is consisted of fewer numbers of components than hydraulic braking system, and it has effects of improved response and reduced braking distance for the ABS(Anti-lock Brake System) and ESC(Electronic Stability Control). This paper presents the BLAC motor drive system for Electro-Magnetic Brake(EMB). Proposed control system consists of the power converter for driving a motor and the digital control system for speed control, and the vector control is applied for fast torque response. It is verified through the simulation using Matlab/Simulink and experiment that the proposed BLAC drive system can be applied to EMB.

전기제동 시스템(Electric braking system)은 기존 자동차 시스템에서 사용된 유압 브레이크를 대신하여 전동기를 이용하여 제동력을 얻게 된다. 전기제동은 기존 유압식에 비해 부품의 수가 감소되며 ABS, ESC 등의 응답성 향상 및 제동거리 감소효과를 얻을 수 있다. 본 논문에서는 EMB(Electro-Magnetic Brake)용 BLAC 전동기의 제어기를 개발하였다. 제어 시스템은 BLAC 전동기 구동을 위한 전력변환장치와 속도제어를 위한 디지털제어기로 구성되었으며, 빠른 토크 응답특성을 위해 벡터제어 기법을 적용하였다. 또한 Matlab/Simulink를 이용한 시뮬레이션 및 실험 결과를 제시하여 EMB용 BLAC 전동기의 성능을 검증하였다.

Keywords

References

  1. R. Shemanske, "Electric motor braking", IEEE Trans. Industry Applications, Vol. IA-19, No. 5, pp. 824-831, 1983, Sept. https://doi.org/10.1109/TIA.1983.4504293
  2. N. Mutoh, Y. Hayano, H. Yahagi, and K. Takita, "Electric braking control methods for electric vehicles with independently driven front and rear wheels", IEEE Trans. Industrial Electronics, Vol. 54, No. 2, pp. 1168-1176, 2007, April. https://doi.org/10.1109/TIE.2007.892731
  3. P. Krishnamurthy, W. Lu, F. Khorrami, A. Keyhani, "A robust force controller for an SRM based electromechanical brake system", in Proceedings of IEEE Conference on Decision and Control, and European Control Conference, Seville, Spain, pp. 2006-2011, 2005, Dec.
  4. Y.S Lee and W.S. Lee, "Hardware-in-the-loop simulation for Electro-mechanical brake", in SICE-ICASE International Joint Conference, Busan Korea, pp. 1513-1516, 2006, Oct.
  5. C. Line, C. Manzie, and M.C. Good, "Electromechanical brake modeling and control : from PI to MPC", IEEE Trans. Control Systems Technology, Vol. 16, No. 3, pp. 446-457, 2008, May. https://doi.org/10.1109/TCST.2007.908200
  6. R. Hoseinnezhad, H.H. Alireza, and T. Rocco, "Real-time clamp force measurement in electromechanical brake calipers", IEEE Trans. Vehicular Technology, Vol. 57, No. 2, pp. 770-777, 2008, March. https://doi.org/10.1109/TVT.2007.906374
  7. H. Nakai, H. Ohtani, E. Satoh, and Y. Inaguma, "Development and testing of the torque control for the permanent magnet synchronous motor", IEEE Trans. Industrial Electronics, Vol. 52, No. 3, pp. 800-806, 2005, June. https://doi.org/10.1109/TIE.2005.847596
  8. 김상훈, DC 및 AC 모터 제어, 복두출판사.