• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.272.1-272.1
• /
• 2016

In a three-dimensional topological insulator Bi2Se3, a stress control for band gap manipulation was predicted but no systematic investigation has been performed yet due to the requirement of large external stress. We report herein on the strain-dependent results for Bi2Se3 films of various thicknesses that are grown via a self-organized ordering process. Using small angle X-ray scattering and Raman spectroscopy, the changes of d-spacings in the crystal structure and phonon vibration shifts resulted from stress are clearly observed when the film thickness is below ten quintuple layers. From the UV photoemission/inverse photoemission spectroscopy (UPS/IPES) results and ab initio calculations, significant changes of the Fermi level and band gap were observed. The deformed band structure also exhibits a Van Hove singularity at specific energies in the UV absorption experiment and ab initio calculations. Our results, including the synthesis of a strained ultrathin topological insulator, suggest a new direction for electronic and spintronic applications for the future.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.939-942
• /
• 2011

Conductive carbon films were prepared at room temperature by unbalanced magnetron sputtering (UBMS) on silicon substrates using argon (Ar) gas, and the effects of post-annealing temperature on the structural, tribological, and electrical properties of carbon films were investigated. Films were annealed at temperatures ranging from $400^{\circ}C$ to $700^{\circ}C$ in increments of $100^{\circ}C$ using a rapid thermal annealing method by vacuum furnace in vacuum ambient. The increase of annealing temperature contributed to the increase of the ordering and formation of aromatic rings in the carbon film. Consequently, with increasing annealing temperature the tribological properties of sputtered carbon films are deteriorated while the resistivity of carbon films significantly decreased from $4.5{\times}10^{-3}$ to $1.0{\times}10^{-6}\;{\Omega}-cm$ and carrier concentration as well as mobility increased, respectively. This behavior can be explained by the increase of sp2 bonding fraction and ordering $sp^2$ clusters in the carbon networks caused by increasing annealing temperature.

• 한국산업정보학회논문지
• /
• 제13권3호
• /
• pp.16-22
• /
• 2008

블루투스통신 기술은 많은 전자통신시스템에 응용되고 있다. 본 논문은 블루투수통신 기술을 이용한 임베디드 시스템개발이다. 본 논문에서 개발한 시스템은 블루투스를 사용하여 주문 시스템에 적용함으로서, 기존의 주문 단계에서 종업원을 부르고, 주문하는 단계를 줄였다. 주문 단계가 줄어들었기 때문에 주문 시간을 단축할 수 있게 되었고, 손님이 직접 주문 시스템을 이용하여 메뉴를 선택하고 확인 후 주문을 하기 때문에 주문 중에 생길 수 있는 실수를 줄였으며, 종업원을 부르기 위한 소음을 해결 하였다. 그리고 주문 시스템과 카운터/주방시스템을 연결한 시스템을 구현함으로서 매출정리를 따로 할 필요가 없게 되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.6-9
• /
• 1993

본 연구에서는 소량(lmol%)의 MnO$_2$를 첨가한 Ba(Zn$_{1}$3Ta$_{2}$3)O$_3$에서 미량(x)외 Ba를 결핍 시켜가면서 마이크로파 유전 특성과 소결성, 구조적 특성을 관찰하였다. XRD분석을 통하여 Ba의 부족량이 증가함에 따라 Ba(Zn$_{1}$3/Ta$_{2}$3/)O$_3$B site의 규칙화와 격자 비틀림(Lattice Distortion)이 촉진되었다. 무부하 Q값은 10.5GHz에서 x가 0.01일때 가장 높은 간(8500)을 나타내었으나 이 후에는 급격히 감소하였고 온도 계수는 Ba의 부족량이 중가함에 따라 중가하였고, x가 0.01일때는 약 2ppm/$^{\circ}C$였다.

• 정보학연구
• /
• 제1권1호
• /
• pp.155-172
• /
• 1998

전자상거래의 경제적 효과는 인터넷의 활용으로 전제적인 거래비용을 줄임으로써 기업의 구조와 사업영역을 변화시키고, 중소기업의 시장진입을 쉽게 함으로써 다양한 거래형태와 많은 이익을 안겨주고 있다. 또한 전자상거래는 검색비용, 배달시간 등을 절감시키고 소매업을 변형시켜 제품의 설계와 소비자에게 최종판매되는 공급사슬의 매개와 교환에 영향을 끼치고 있다. 따라서 전자상거래에서 얻을 수 있는 전체적인 효과는 낮은 거래비용으로 국내외적인 경쟁촉진, 품질향상과 가격하락, 기업간 상거래와 소매업의 변형을 들 수 있다.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.53-57
• /
• 2009

The h-BN powder was synthesized by amorphous $B_2O_3$ and activated carbon at $1550^{\circ}C$ in nitrogen atmosphere, whose properties were examined according to $MgB_6$ addition. Amount of $MgB_6$ addition was varied in the range of $0{\sim}$10\;wt% of the initial mixture. It was observed that $MgB_6$ addition led to an increase in the amount and the grain size of h-BN and decrease in the amount of $B_4C$ forming. When $MgB_6$ added 5 wt%, the amount and crystallinity of h-BN increased as the holding time at the synthesis temperature was prolonged. It was also confirmed that the regularity of three-dimensional ordering of h-BN increases.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.119-122
• /
• 2011

A series of mesoporous silicalites was synthesized using different compositions of tetraethylorthosilicate and methyltriethoxysilane (MTES) as the silica source. Cetyltrimethylammonium bromide was used as the organic template. Their detailed pore structures were investigated by transmission electron microscopy, X-ray diffraction, and N2 adsorption method. The thermal properties of these silicalites were studied by thermogravimetric analysis. The increased amount of MTES destroyed mesoporous channels and reduced pore sizes from 3.4 nm to 2.8 nm in calcined silicalites. The calcined silicalite transformed completely into an amorphous state at 30% MTES loading. Methyl pending groups of MTES hindered the structural ordering of ≡Si-O- frameworks, resulting in an amorphous structure. This was caused by the insufficient formation of supramolecular assembly with the organic template. No capillary condensation step was found in MS 7/3 silicalite. The other capillary condensation steps shifted toward the lower relative pressure with increasing MTES content, indicating the reduction of pore sizes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권12호
• /
• pp.2326-2339
• /
• 2011

To reduce the implementation complexity of the Vertical Bell Labs layered space-time (V-BLAST) systems with respect to the zero-forcing (ZF) criterion, a computationally efficient recursive algorithm is proposed. A fast implementation of the proposed algorithm is developed and its complexity is analyzed in detail. The proposed algorithm matches the ZF-OSIC detection well, and its three significant advantages can be demonstrated by analyses and simulations. Firstly, its speedups over the conventional ZF-OSIC with norm-based ordering, the original fast recursive algorithm (FRA) and the fastest known algorithm (FKA) in the number of flops are 1.58, 2.33 and 1.22, respectively. Secondly, a much simpler implementation than FRA and FKA can be expected. Finally, the storage requirements are lower than those of FRA and FKA. These advantages make the proposed algorithm more efficient and practical.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.423-432
• /
• 2014

Non-dominated Sorting Genetic Algorithm-II (NSGA-II) is applied for solving Combined Economic Emission Dispatch (CEED) problem with valve-point loading of thermal generators. This CEED problem with valve-point loading is a nonlinear, constrained multi-objective optimization problem, with power balance and generator capacity constraints. The valve-point loading introduce ripples in the input-output characteristics of generating units and make the CEED problem as a nonsmooth optimization problem. To validate its effectiveness of NSGA-II, two benchmark test systems, IEEE 30-bus and IEEE 118-bus systems are considered. To compare the Pareto-front obtained using NSGA-II, reference Pareto-front is generated using multiple runs of Real Coded Genetic Algorithm (RCGA) with weighted sum of objectives. Comparison with other optimization techniques showed the superiority of the NSGA-II approach and confirmed its potential for solving the CEED problem. Numerical results show that NSGA-II algorithm can provide Pareto-front in a single run with good diversity and convergence. An approach based on Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) is applied on non-dominated solutions obtained to determine Best Compromise Solution (BCS).

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.26-29
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.