• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.526-526
• /
• 2000

The present has a double objective. The first one is to compare and estimate sixteen continuous-time methods through the identificatiun of a system consisted with an RLC electrical circuit. These sixteen methods are classified into three groups that are the linear filters, the modulating functions and the integral methods. The second objective is to estimate directly the physical parameters of the RLC circuit, without resorting to a discrete-time model. The system is consisted of a coil with inductance L and resistance H, and of a capacitor with capacitance C. Having written the physical equations which describe the behavior of the system, the transfer function in where the initial conditions appear is given. These initial conditions should be taken into account during the parameter estimation phase, because they are inevitable within the framework of real signals. A physical interpretation of the identified models is tempted by the direct estimation of the physical parameters L and C. In conclusion, a classification of the studied methods is proposed.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.229-236
• /
• 2018

본 논문에서는 GPS 수신기에서 L1 C/A 신호의 포착과 추적을 이해하고, GPS 수신기 신호의 수신에 관해서 연구하고, GPS 신호 수신과정에 관해서 Matlab을 사용해서 모의실험을 한다. 실험한 결과, 우리가 실행한 방법의 정확성과 가능성을 확인할 수 있었고, GPS 수신기의 성능은 위성의 수신능력이 매우 중요하다는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.55-59
• /
• 1990

N-Channel polysilicon MOSFETs (W/L=20/1.5, 3, 5.10$\mu\textrm{m}$) were fabricated using RTP(Rapid Thermal Processor) and hydrogen passivation. The N+ Source, drain and gate were annealed and recrystallized using RTP at temperature of 1000$^{\circ}C$-1100$^{\circ}C$. But the active areas were now specially crystallized before growing the gate oxide. Without the hydrogen passivation, excellent transistor characteristics (ON/OFF=5${\times}$10$\^$6/, s=85mv/dec, I$\_$L/=51pA/$\mu\textrm{m}$) were obtained for 1.5$\mu\textrm{m}$ MOSFET. Also the transistor characteristics were improved by hydrogen passivation.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.53-59
• /
• 1998

Paraelectric lead landthanum titanate(PLT) thin films have been prepared by a reactive dc magnetron sputtering system using a multicomponent metal target. The surface area control of each element on the target markedly facilitates the fabrication of thin films of complex ceramic compounds. A postdeposition heat-treatment was applied to all as-deposited PLT thin films at annealing temperatures up to 75$0^{\circ}C$ for crystalization. The composition of the PLT(28) thin filmannealed at $650^{\circ}C$ was: Pb, 0.73; La, 0.28; Ti, 0.88; O, 2.9. The dielectric constant and dissipation factor of the thin film(200 nm) at low filed measurements (500 Vcm-1) are 1216 and 0.018, respectively. The charge storage density using a typical Sawyer-Tower circuit with a 500 Hz sine wave was 12.5 $\mu$Ccm-2 at the electric field of 200 kVcm-1.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1114-1118
• /
• 1992

This paper deals with the analysis of the electronic ballast which is based on half-bridge type series inverters. First, design basis was described for the determination of the values, L and C. Next, the operation of the electronic ballast was analyzed theoritically. Finally. the digital simulations and experiments were carried out to prove the obtained theoritical results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.106-108
• /
• 2002

The composites were fabricated 61vol.% $\beta-SiC$ and 39vol.% $TiB_2$ powders with the liquid forming additives of l2wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at $1700^{\circ}C,\;1750^{\circ}C,\;1800^{\circ}C$ for 4 hours respectively. The result of Phase analysis of composites by XRD revealed $\alpha-SiC$(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density and the Young's modulus showed the highest value of 92.9701% and 92.884Gpa for composites by pressureless annealing temperature $1700^{\circ}C$ at room temperature.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• 센서학회지
• /
• 제10권3호
• /
• pp.180-186
• /
• 2001

최근 전류 법적인 Clark형 센서의 단점을 극복하기 위해 FET형 용존 산소 센서가 제안되었다. 그러나 제안된 센서의 출력은 작업전극에서 발생하는 pH의 변화를 감지하기 때문에 유속에 대한 영향을 받는다. 본 논문에서는 FIA(flow injection analysis)를 이용하여 유속의 영향을 최소화 할 수 있는 방향을 결정하였다. 그리고 완충막을 작업전극과 감지막 위에 형성시켜 작업전극과 감지부가 측정용액에 직접 노출되어 용액의 유동에 의해 센서의 출력이 불안정한 문제를 개선하였다. TEOS(tetraethylorthosilicate)와 DEDMS(diethoxydimethylsilane)를 혼합하여 졸-겔법으로 완충막을 형성하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.160-161
• /
• 2006

To Improve the mean-life and the reliability of power cable, we have investigated thermal conductivity of XLPE insulator and semiconducting materials in l54[kV] underground power transmission cable. Specimens were made of sheet form with the nine of specimens for measurement. Thermal conductivity were measured by Nano Flash Diffusivity thermal conductivity measurement temperature ranges of XLPE insulator were from 20[$^{\circ}C$] to 90[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/mm]. In case of semiconducting materials. the measurement temperature ranges of thermal conductivity were from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min].

• 한국통신학회논문지
• /
• 제32권1C호
• /
• pp.86-93
• /
• 2007

최근 들어, 국내외에서는 투표용지 대신에 전자적 투표 장치를 이용하는 전자투표 시스템들을 개발하고 있으나 이러한 전자투표 시스템은 전자투표의 초기 단계로서 온라인 투표시스템은 아니다. 따라서 많은 암호학자들은 암호기술을 기반으로 하는 온라인 전자투표에 대한 연구를 하고 있다. 기존의 1-out-of-L 전자투표는 E1Gamal 암호 기법을 기반으로 하고 있다. 본 논문에서는 계산복잡도를 줄이기 위해, r차 잉여암호를 이용하고, E1Gamal 암호 기반의 1-out-of-L 전자투표의 계산복잡도와 제안한 1-out-of-L 전자투표의 계산복잡도를 비교 분석하였으며, 제안한 전자투표 방식이 보다 효율적임을 보여준다. 또한, 새로운 형태의1-out-of-L 전자투표의 투표-취소 기법을 제안한다. 기존의 전자투표 시스템들은 투표 후의 투표-취소 기법에 대해서 간과해 왔다. 본 논문에서는 제안한 투표-취소 기법을 위해, 기존의 r차 잉여암호의 준동형성을 확장한다. 확장된 준동형성은 프라이버시와 전체검증성을 유지하면서 투표를 취소할 수 있다.