• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.999-1011
• /
• 2015

In modern electronic warfare, RADAR is under constant threat of ECM(Electronic Counter Measures) signals from nearby jammers. The conventional linear frequency modulated(Linear-FM) waveform is easy to be intercepted to estimate its signal parameters due to its periodical phase transition. Recently, APCN(Advanced Pulse Compression Noise) waveform using random amplitude and phase transition was proposed for LPI(Low probability of Intercept). But random phase code signals such as APCN waveform tend to be sensitive to Doppler frequency shift and result in performance degradation during moving target detection. In this paper, random phase and code rate transition based radar waveform(RPCR) is proposed for Doppler tolerance improvement. Time frequency analysis is carried out through ambiguity analysis to validate the improved Doppler tolerance of RPCR waveform. As a means to measure the vulnerability of the proposed RPCR waveform against LPI, WHT(Wigner-Hough Transform) is adopted to analyze and estimate signal parameters for ECCM(Electronic Counter Counter Measures) application.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.474-481
• /
• 2011

The Electronic Warfare Computer for the Aircraft Survivability Equipment will improve the ability for countermeasures by analysis about threat information. This paper suggests method that threat data integration of multiple sensors(Radar Warning Receiver, Laser Warning Receiver, Missile Warning Receiver). The algorithm of threat data integration is based on detected threat sequence and azimuth information. The threat sequence information is analyzed in advance and the azimuth data is received from sensors. The suggested method is evaluated through simulation under the environment like real helicopter.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.101-106
• /
• 2003

항공기 외부 장착물인 POD는 전자전 방해장치(ECM, electronic counter measures)로서 전자방해 장비 및 부분 부품인 전ㆍ후방 러그(lug)와 외부 케이스로 이루어져 있다. POD는 항공기 외부 동체 하단부 및 파일런(pylon)에 장착되어 작동하므로 항공기의 운용중 이륙부터 착륙간의 기동에 의한 피로하중을 주로 받게 되므로 POD 부품들에 대한 구조 건전성 확보하기 위해서는 MIL-STD-1530의 요구에 따라 내구성(durability) 및 손상허용설계(damage tolerance design) 의 평가가 요구되고 있다.(중략)

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.1
• /
• pp.115-128
• /
• 2017

The methods of electronic financial fraud continue to evolve. Various research and countermeasures have been proposed to counter this problem, but it is difficult to eradicate it. The purpose of this study is to analyze the risk of electronic financial fraud through MS Threat Risk Modeling and to propose the countermeasures against the electronic financial fraud. As a result of the analysis, it is confirmed that despite the difference of authentication methods, there is a high risk of pharming, and it is difficult to prevent attack by using only additional authentication means, device security or user authentication based security system. Therefore, this study suggests the introduction of preventive measures such as readjustment of transaction limit by security means, account authentication, and additional physical security measures. It also suggests the establishment and implementation of a comprehensive electronic financial fraud prevention policy through linkage of electronic fraud prevention system and improvement of public relations and user awareness.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.95-112
• /
• 2005

This paper will look into the Main Substance and Some Problems of 24 hours Advance Cargo Manifest Declaration Rule, focuses on the Policy implication of Korea's and counter measures of our parties concerned about 24-hour advance vessel manifest rule. The 24-hour rule requires cargo owners to submit cargo manifest information to U.S. Customs 24 hours before vessel sailing from the final foreign port to a U.S. port. Cargo manifest information must be complete, accurate, and timely. As of February 2, 2003 manifest information can be submitted by paper or electronically. Cargo descriptions must be at a level of detail consistent with Harmonized Tariff Schedule (HTS) codes used by U.S. Customs. HTS codes are 10 digits. Electronic submissions are made via the Automated Manifest System (AMS) run by U.S. Customs.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.1-16
• /
• 1998

Aircraft combat survivability(ACS) can be defined here as the probability of an aircraft to accomplish a given mission and not to be killed by enemy threats. The purpose of this thesis is to obtain analytically the combat survivability of the military aircraft according to the enemy and operation environment. Five factors under which a mission is being carried out are considered in this study. These factors are types and performance of enemy threats, aircraft susceptibility, aircraft vulnerability, ECM(electronic counter measures) capability, and pilot's capability. The model constructed in this study would be a useful tool to analyze ACS based on analytical method. It is also able to provide a better input data for wargaming simulation and present a criterion on determining optimal sorties for aircraft's air-to-ground mission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.242-253
• /
• 2011

The typical missions for the current stand-off UAVs are surveillance and reconnaissance. On the other hand, the primary mission for the future UCAS will be combat mission such as SEAD under the man-made ultimately hostile environment including SAM, antiaircraft artillery, threat radar, etc. Therefore, one of the most important challenges in UCAS design is improvement of survivability. The current studies for aircraft combat survivability are focused on the improvement of susceptibility and vulnerability of manned aircraft system. Although the survivability design methodology for UCAS might be very similar to the manned combat system but there are some differences in mission environment, system configuration, performance between manned and unmanned systems. So the parameters and their sensitivities which affect aircraft combat survivability are different in qualitatively and quantitatively. The susceptibility related parameters for F-16 C/D and X-45A as an example of manned and unmanned system are identified and the susceptibility parameter sensitivities are analyzed by using Monte-Carlo Simulation in this study.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.408-411
• /
• 2017

In this paper, we propose an integrated control system that measures neutrons, gamma ray, and x-ray. The proposed system is able to monitor and control the data measured and analyzed on the remote or network, and can monitor and control the status of each part of the system remotely without remote control. The proposed system consists of a gamma ray/x-ray sensor part, a neutron sensor part, a main control embedded system part, a dedicated display device and GUI part, and a remote UI part. The gamma ray/x-ray sensor part measures gamma ray and x-ray of low level by using NaI(Tl) scintillation detector. The neutron sensor part measures neutrons using Proportional Counter Detector(low-level neutron) and Ion Chamber Type Detector(high-level neutron). The main control embedded system part detects radiation, samples it in seconds, and converts it into radiation dose for accumulated pulse and current values. The dedicated display device and the GUI part output the radiation measurement result and the converted radiation amount and radiation amount measurement value and provide the user with the control condition setting and the calibration function for the detection part. The remote UI unit collects and stores the measured values and transmits them to the remote monitoring system. In order to evaluate the performance of the proposed system, the measurement uncertainty of the neutron detector was measured to less than ${\pm}8.2%$ and the gamma ray and x-ray detector had the uncertainty of less than 7.5%. It was confirmed that the normal operation was not less than ${\pm}15$ percent of the international standard.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.839-847
• /
• 2011

Instrumentation & Control(I&C) System in NPP(Nuclear Power Plant) plays a important role as the brain of human being, it performs protecting, controling and monitoring safety operation of NPP. Recently, the I&C system is digitalized as digital technology such as PLC, DSP, FPGA. The different aspect of digital system which use digital communication to analog system is that it has potential vulnerability to cyber threat in nature. Possibility that digital I&C system is defected by cyber attack is increasing day by day. The result of cyber attack can be adverse effect to safety function in NPP. Therefore, I&C system required cyber security counter-measures that protect themselves from cyber threat efficiently and also cyber security design should be taken into consideration at concept stage in I&C system development process. In this study, we proposed the digital asset analysis method for cyber security assessment of I&C system design in NPP and we performed digital asset analysis of I&C system by using the proposed method.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.8 no.1
• /
• pp.49-61
• /
• 2013

Objectives: The aim of this study was to analyse the domestic trends of Chuna treatments techniques in Korean literature. Methods: We searched the clinical trials on Chuna treatments through both electronic search(used keyword 'chuna') and hand search in 3 Korean web databases(OASIS, NDSL, RISS) and 4 related journals(The Journal of Korea CHUNA Manual Medicine for Spine & Nerves, Journal of Oriental Rehabilitation Medicine, The Journal of Korean Acupuncture & Moxibustion Society, Journal of Korean Medicine Society). All relevant clinical trials were selected and extracted to be analyzed according to their published year, journals, types of study, used techniques. Results: The number of the clinical studies tends to increase every year. The studies on Chuna treatments were mainly published in The Journal of Korea Chuna Manual Medicine for Spine & Nerves. In case of types of study, case reports and case series were predominant. The most frequently adopted techniques of Chuna in studies were flexion distraction technique for lumbar spine and JS supine position cervical spine distraction. Conclusions: Through the results of this study, we hope that the more qualitative education could be conducted by strengthening the techniques which often used. Also analysis of the reason of rarely used techniques should be conducted and the modification or developing techinques should be followed as a counter measures. As applying more rigorous methodology, more qualitative evidence based Chuna studies should be conducted in future clinical research.