• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.325-333
• /
• 2021

A 3 kW grid-tied PV inverter with Gallium nitride high-electron mobility transistor (GaN HEMT) for domestic commercialization was developed using boost converter and full-bridge inverter with LCL filter topology. Recently, many GaN HEMTs are manufactured as surface mount packages because of their lower parasitic inductance characteristic than standard TO (transistor outline) packages. A surface mount packaged GaN HEMT releases heat through either top or bottom cooling method. IGOT60R070D1 is selected as a key power semiconductor because it has a top cooling method and fairly low thermal resistances from junction to ambient. Its characteristics allow the design of a 3 kW inverter without forced convection, thereby providing great advantages in terms of easy maintenance and high reliability. 1EDF5673K is selected as a gate driver because its driving current and negative voltage output characteristics are highly optimized for IGOT60R070D1. An LCL filter with passive damping resistor is applied to attenuate the switching frequency harmonics to the grid-tied operation. The designed LCL filter parameters are validated with PSIM simulation. A prototype of 3 kW PV inverter with GaN HEMT is constructed to verify the performance of the power conversion system. It achieved high power density of 614 W/L and peak power efficiency of 99% for the boost converter and inverter.

• 한국축산식품학회지
• /
• 제37권2호
• /
• pp.297-304
• /
• 2017

Animal-origin food products pose serious threat to public food safety due to high microbial loads. The microbial and radioactive contaminations in commercial cold duck meat products were evaluated. Ten different lots of commercial samples ($C_1-C_{10}$) were classified based on type and smoking process. All samples were highly contaminated (< 4-7 Log CFU/g) with total aerobic bacteria (TAB), yeasts and molds (Y&M), and 7 samples ($C_1-C_7$) were positive for coliforms. Furthermore, three samples were contaminated with Listeria monocytogenes ($C_4-C_6$) and one with Salmonella typhimurium ($C_6$). No radionuclides ($^{131}I$, $^{137}Cs$, and $^{134}Cs$) were detected in any sample. The results of DEFT (direct epifluorescent filter technique)/APC (aerobic plate count), employed to screen pre-pasteurization treatments of products, indicated that smoked samples were positive showing DEFT/APC ratios higher than 4. Notably, the samples showed a serious threat to microbial safety, thus were irradiated with electron-beam (e-beam). The $D_{10}$ values for S. typhimurium and L. monocytogenes were 0.65 and 0.42 kGy, respectively. E-beam application at 3 and 7 kGy resulted in reduction of initial TAB, Y&M, and coliform populations by 3 and 6 log cycles, respectively. Thus, e-beam was proven to be a good decontamination approach to improve the hygiene of cold duck meat.

• 한국방사선학회논문지
• /
• 제11권6호
• /
• pp.501-508
• /
• 2017

방사선치료에 사용하는 CT 스캐너에 의해 획득된 CT 및 CBCT 전자밀도팬텀의 CT영상부터 CT수 대 물리적 밀도 변환에 관한 CT 스캐닝 매개변수의 의존성은 실험으로 분석하였다. CT수는 관전류량, 슬라이스 두께, 영상재구성 필터, 시야 그리고 팬텀 용적의 크기에 대해 의존하지 않았다. 그러나 CT수는 관전압과 팬텀 횡단면적 크기에 의존하였다. 결과로서, 물리적 밀도 1이상의 범위에 대하여, 90과 120 kVp 사이의 관전압에서 관측된 최대 CT수 차이는 27%이었고, 그리고 CT 몸통과 머리 전자밀도팬텀 사이에서 관측된 최대 CT수 차이는 15%이었다.

• 한국의학물리학회지:의학물리
• /
• 제10권1호
• /
• pp.55-62
• /
• 1999

방사선치료에 이용되는 X-선의 특성을 고찰하기 위하여, 몬테칼로 방법을 이용하여 텅스텐 표적에 입사한 6, 10, 15 MeV 의 전자선에 의해 발생되는 X-선의 에너지분포와 평균에너지를 계산하였다. 빔의 반경의 함수로서 계산된 광자의 평균에너지는 6, 10, 15 MV에 대하여 각각, 1.4-1.6, 2.1-2.5, 2.8-3.3 MeV 범위로서 반경에 크게 의존하지 않고 거의 일정하였다. 표적과의 수직거리 100 cm에서 구해진 6, 10, 15 MV X-선의 에너지분포를 이용하여, 몬테칼로 계산으로 깊이선량율을 계산하였다. 이 중 10 MV에 대한 것을 측정값과 비교하였다. 계산된 10 MV X-선의 깊이선량율은 표면영역을 제외하고 깊이의 증가에 따라 측정값보다 낮게 나타났다. 그 이유는 실제 X-선의 에너지분포에는 편평화여과기에 의한 빔경화효과가 포함되어 있는 반면, 본 연구에서 수행한 몬테칼로 계산결과에는 이 효과가 포함되어 있지 않기 때문으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권3호
• /
• pp.83-95
• /
• 1997

The degradation mode of lignocellulose by anaerobic ruminal cellulolytic bacterium Ruminococcus albus F-40 was investigated. Birchwood holocellulose and filter paper were incubated as the sole carbohydrate sources with using the Hungate techniques. After 2 or 4 days of incubation, samples were employed for chemical and electron microscopic evaluations. The degradation rate of cellulosic substrates and the adhesion rate of bacteria to the substrates increased proportionally with the decrease of relative crystallinity of cellulose, indicating the preferential breakdown of amorphous cellulose, by this bacterium. X-ray diffraction analyses and polarized light microscopy showed, however, that crystalline cellulose was also degraded by R. albus. FT-IR spectra indicated that not only cellulose but hemicellulose was also degraded by this bacterium. Electron microscopic investigations showed the protuberant structures on the surface of R. albus. These structures were much more significant when bacterial cells were grown in the media containing insoluble substrates, such as cellulose, indicating clearly that bacterial protuberant structures were induced by the substrates. Protuberant structures extended from the bacterial cells adhered tightly to the substrates and numerous vesicles covered the surface of cellulosic substrates affected. Cellulosome-like structures were distributed on the cellulose matrix. Electron microscopic works showed that diverse surface organells of R. albus were involved in the degradation of cellulosic materials. SEM examinations showed the breakdown of cellulose by R. albus was proceeded by severeal routes : short fiber formation, defibrillation and destrafication of cellulose microfibril.

• Molecules and Cells
• /
• 제46권9호
• /
• pp.538-544
• /
• 2023

The formation of uniform vitreous ice is a crucial step in the preparation of samples for cryogenic electron microscopy (cryo-EM). Despite the rapid technological progress in EM, controlling the thickness of vitreous ice on sample grids with reproducibility remains a major obstacle to obtaining high-quality data in cryo-EM imaging. The commonly employed classical blotting process faces the problem of excess water that cannot be absorbed by the filter paper, resulting in the formation of thick and heterogeneous ice. In this study, we propose a novel approach that combines the recently developed nanowire self-wicking technique with the classical blotting method to effectively control the thickness and homogeneity of vitrified ice. With simple procedures, we generated a copper oxide spike (COS) grid by inducing COSs on commercially available copper grids, which can effectively remove excess water during the blotting procedure without damaging the holey carbon membrane. The ice thickness could be controlled with good reproducibility compared to non-oxidized grids. Incorporated into other EM techniques, our new modification method is an effective option for obtaining high-quality data during cryo-EM imaging.

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.145-150
• /
• 2007

다층간섭필터 제작을 위한 $SiO_2 & TiO_2$ 박막을 electron-beam을 이용하여 제작하였다. 이온빔 보조증착 장비를 이용한 경우, 아르곤 가스와 산소 가스의 비율에 따라 양극전류를 변화시키며 증착하였고, 전자빔만을 사용한 경우에는 $100{\sim}250^{\circ}C$까지 $50^{\circ}C$ 간격으로 온도를 조정하여 증착하였다 $SiO_2$ 박막의 경우 표면 거칠기는 $200^{\circ}C$와 양극전류 0.2A에서 가장 낮은 값을 보였으며, 굴절률은 이온빔 보조 장치를 사용한 박막이 전자빔만을 사용하여 증착한 박막보다 전체적으로 0.1 정도 낮았다. $TiO_2$의 경우 표면거칠기는 상온과 양극전류 0.2A에서 가장 낮으며, 굴절률은 이온빔 보조 증착장치를 사용한 박막이 전자빔만으로 증착한 경우보다 전체적으로 낮은 값을 나타내었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.494-499
• /
• 2004

A ion source using inductively coupled plasma has been tested in order to test its feasibility as a high brightness ion source for focused ion beam. When operating the ion source with filter magentas in front of plasma electrode for a negative ion source, lower remittances are expected. Extracted beam remittances are measured with an Allison-type scanning device for various plasma parameters and extraction conditions. The normalized omittance has been measured to be around 0.2$\pi$mmmrad with beam currents of up to 0.55 ㎃. In particular, noting that multicusp magnets have a role in decreasing the remittance as well as increasing plasma discharge efficiency, transverse magnetic field has been confirmed to be a useful tool fur decreasing remittance via electron energy control.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.526-531
• /
• 2011

Fecralloy is the promising materials for high temperature exhaust filtering system due to the excellent its oxidation resistance property. In this research, Fecralloy nanoparticles coated Fecralloy thin foil was prepared by a single nozzle electrospray system in order to increase surface area of Fecralloy foil. Fecralloy nanoparticles were fabricated by electrical wire explosion method in ethanol using Fecralloy wires as a source material. Electrospray modes with applied D.C voltages to Fecralloy colloidal solution were investigated to make a stable cone-jet mode. Coated layers with and without additional heat treatment were observed by FE-SEM (field emission-scanning electron microscope) and tape test for evaluating their adhesion to substrate were performed as well.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.847-850
• /
• 2008

Three thermally stable red dyes of azo, quinacridone and perylene derivatives were synthesized and dye-based color filters were manufactured for liquid crystal display. Aggregation behavior of the dyes and their spectral property in film state were investigated by concentration dependent spectroscopy and field emission scanning electron microscopy (FE-SEM). These dyes have remarkable difference on their aggregation behavior in film state. Such difference of aggregation behavior affects the spectral property of the film, and it can cause decreasing the transmittance of dye-based color filters.