• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.154-160
• /
• 2003

Polypropylene nonwoven fabrics were grafted with acrylic acid by a preirradiation method by using electron beam accelerator. The effect of irradiation dose, storage time, concentration of acrylic acid, reaction temperature, reaction time and Mohr's salt concentration on the degree of grafting were investigated in detail. The grafted Polypropylene nonwoven fabrics were characterized using IR spectroscopy and SEM. The results showed that the degree of grafting increased with increasing absorbed dose and the Mohr's salt in the acrylic acid solution promoted grafting efficiency.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.373-380
• /
• 2020

This study was carried out to convert the hydrophobic characteristics of PVDF to hydrophilic. Poly(-vinylidene fluorine) (PVDF) was grafted by electron beam irradiation and sulfonated. The grafting degree of modified PVDF increased with the monomer concentration, but not the conversion degree. From the results of FTIR and XPS, it was shown that the amount of converted sulfur increased with the grafting degree. The radiation-induced graft polymerization led to decrease fluorine from 35.7% to 21.3%. Meanwhile, the oxygen and sulfur content increased up to 8.1% and 3.2%. The pore size of modified membranes was shrunken and the roughness sharply decreased after irradiation. The ion exchange capacity and contact angle were investigated to show the characteristics of PVDF. The enhanced ion exchange capacity and lower contact angle of modified PVDF showed that the hydrophilicity played a role in determining membrane fouling. Electron beam irradiation successfully modified the hydrophobic characteristics of PVDF to hydrophilic.

• Nuclear Engineering and Technology
• /
• 제15권1호
• /
• pp.1-10
• /
• 1983

Grafting과 주형용액 성분의 조절에 의한 붕괴 반웅과 방사선애 의한 graft 중합의 공간적 변화는 발견되지 않았다. 스틸렌-셀루로즈 아세테이트 grafts의 내절연성은 스틸렌 함량이 증가할수록 증가한 반면 친수성 단량체에 관한 grafts는 확실한 효과를 나타내지 않았다. 동시 조사법에 의해 graft된 셀루로즈 아세테이트막과 비교해 보면 전조사법에 의해 graft된 막은 ${\gamma}$선 또는 전자선의 방사선선량과 graft %에 관계없이 거의 변하지 않았다. VP:St: BPO 시스템내 디비닐벤젠 (DB) 또는 트리메틸프로판트리아크레이트(TMPT) 같은 가교제의 혼합으로 점차 graft %는 증가되었다. 셀루로즈 아세테이트막에 대한 St:VP:BPO 용액의 grafting에 관한 활성화 에너지는 55$^{\circ}$-8$0^{\circ}C$에서 약 21.8Kca1/mole이었다. Grafting의 초기속도 (%/hr)는 선량강도의 0.76 승에 비례하였다.

• 한국환경과학회지
• /
• 제23권8호
• /
• pp.1419-1428
• /
• 2014

Electron beam-induced grafting polymerization was employed to prepare Acrylic acid-grafted bacterial cellulose (BC-g-AAc). BC-g-AAc as an adsorbent was applied to remove heavy metals (e.g., As, Pb, and Cd). This study examined followings; morphological change of surface, adsorptive behavior of BC-g-AAc, and interpretation of adsorptive kinetics. Specific surface areas of BC and BC-g-AAc were $0.9527m^2g^{-1}$ for BC and $0.2272m^2g^{-1}$ for BC-g-AAc, respectively as measured by BET nitrogen adsorption, revealing the morphological change of the surface of BC-g-AAc. Batch adsorption test was performed to investigate adsorptive behavior of BC-g-AAc in aqueous solution. The amounts of Pb and Cd adsorbed on BC-g-AAc were $69mg\;g^{-1}$ and $56mg\;g^{-1}$, respectively. However, As was not adsorbed on BC-g-AAc due to its neutral nature. Both the Benaissa model and the Kurniawan model were applied in the study to interpret adsorptive kinetics. From the value of correction coefficient ($R^2$), adsorptive kinetics of Pb and Cd were subjected to Kurniawan model referred to pseudo-second-order. Taken together, the results of this study show that BC-g-AAc has potential as a heavy metal (eg., Pb, Cd)-adsorbent made of an environmentally friendly material.

• Composites Research
• /
• 제32권6호
• /
• pp.335-341
• /
• 2019

본 연구는 전자선 조사를 이용하여 폴리프로필렌(polypropylene, PP) 부직포에 아크릴산(acrylic acid, AAc)을 그라프트 한 후 납 이온에 대한 흡착성능을 평가하였다. 다양한 조건에서 그라프트를 실시하여 조사량 100 kGy, 단량체 농도 60%에서 약 50%의 그라프트율을 갖는 아크릴산이 그라프트 된 폴리프로필렌(PP-g-AAc) 부직포를 제조하였다. 제조된 PP-g-AAc 부직포의 물리/화학적 특성을 SEM, ATRIR, 열분석, 인장강도 등의 분석을 통해 평가하였다. SEM으로 확인한 PP와 PP-g-AAc 부직포의 형태에는 큰 변화가 없었으며, ATR-FTIR 결과로부터 PP 부직포에 AAc가 도입되었다고 판단하였다. PP-g-AAc 부직포는 PP 부직포와 비교하여 인장강도는 증가하고 인장변형률은 감소하였다. 하지만 그 변화의 값이 크지 않아 물리적 특성에 큰 영향력은 없을 것이라 판단된다. 다양한 이온들에 대한 PP-g-AAc 부직포의 흡착특성을 평가한 결과 납에 대해 선택적 흡착 거동을 보였다. 결론적으로, 본 연구에서 제조된 PP-g-AAc는 납 이온 흡착을 위한 흡착제로서 응용이 기대된다.