• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.201-207
• /
• 2012

This paper presents the results and gained experiences from the Project Based Learning (PBL) of magnetic component design within a Power Electronics Course. PBL was applied during the laboratory exercises through a design-project task based on a boost converter test board. The students were asked to calculate the main boost converter's circuit parameters' capacitor C and inductor L, and then additionally required to design and build-up the inductor L, in order to meet the project's goals. The whole PBL process relied on ideas from the CDIO (Conceive, Design, Implement, Operate), where the students are encouraged to consider the whole system's process, in order to obtain hands-on experience. PBL is known to be a motivating and problem-centered teaching method that gives students the ability to transfer their acquired scientific knowledge into industrial practice. It has the potential to help students cope with demanding complexities in the field, and those problems they will face in their future careers.

• Smart Structures and Systems
• /
• 제18권6호
• /
• pp.1217-1231
• /
• 2016

In this research, a slotted patch antenna sensor is designed for wireless strain and crack sensing. An off-the-shelf RFID (radiofrequency identification) chip is adopted in the antenna sensor design for signal modulation. The operation power of the RFID chip is captured from wireless reader interrogation signal, so the sensor operation is completely battery-free (passive) and wireless. For strain and crack sensing of a structure, the antenna sensor is bonded on the structure surface like a regular strain gage. Since the antenna resonance frequency is directly related with antenna dimension, which deforms when strain occurs on the structural surface, the deformation/strain can be correlated with antenna resonance frequency shift measured by an RFID reader. The slotted patch antenna sensor performance is first evaluated through mechanics-electromagnetics coupled simulation. Extensive experiments are then conducted to validate the antenna sensor performance, including tensile and compressive strain sensing, wireless interrogation range, and fatigue crack sensing.

• 한국광학회지
• /
• 제20권1호
• /
• pp.48-52
• /
• 2009

파장 514.5 nm에서 8.4 um 두께의 ECB(Electically Controlled Birefringenence) 액정 셀과 1/4 파장판을 이용하여 간단하게 360도 이상으로 선형편광의 방향을 광손실없이 자유롭게 바꿀 수 있는 선형편광 회전기를 제안하고 이를 구현하였다. 이 선형편광 회전기의 편광도는 0.964이며, 1주일간의 시간적 변화도 ${\pm}1$도 정도로 시간적 안정성이 매우 뛰어남을 확인하였다. 이 선형편광기의 전압 대회전각의 비선형성 문제는 사용할 전압범위를 바꾸거나 이 선형편광 회전기의 회전각에 대한 피팅곡선을 사용하면 쉽게 해결할 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.100-109
• /
• 2008

The finite volume time domain(FVTD) technique faces serious limitations in simulating electromagnetic scattering at high frequencies due to requirements related to discretization. A modified FVTD method is proposed for electrically large, perfectly conducting scatterers by partially incorporating a time-domain physical optics(PO) approximation for the surface current. Dominant specular returns in the modified FVTD method are modeled using a PO approximation of the surface current allowing for a much coarser discretization at high electrical sizes compared to the original FVTD scheme. This coarse discretization can be based on the minimum surface resolution required for a satisfactory numerical evaluation of the PO integral for the scattered far-field. Non-uniform discretization and spatial accuracy can also be used in the context of the modified FVTD method. The modified FVTD method is aimed at simulating electromagnetic scattering from geometries containing long smooth illuminated sections with respect to the incident wave. The computational efficiency of the modified FVTD method for higher electrical sizes are shown by solving two-dimensional test cases involving electromagnetic scattering from a circular cylinder and a symmetric airfoil.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권3호
• /
• pp.1-6
• /
• 2020

This paper presents the analysis results on the electrical output performance characteristics of a 746 W high temperature superconducting generator (HTSG). The HTS field winding is charged by non-contact excitation method, i.e., contactless superconducting field exciter (CSFE) which is originated by rotary flux pump based on permanent magnet. In this paper, the preliminary current charging test was carried out using a 70 A CSFE to evaluate the performance of field exciter and analyze its non-contact excitation characteristics for the full-scale HTS field winding of the 746 W HTSG. First, the various contactless current-charging tests were conducted using assembly with HTS field winding and CSFE. Then, in order to estimate the output power performance characteristics of the 746 W HTSG, finite element analysis was conducted based on field excitation information which is experimentally measured under various operating conditions. Finally, the electrical output characteristics in no-load and load models were simulated by two-dimensional transient solver in ANSYS electromagnetics 19.0 release.

• 한국자기학회지
• /
• 제18권2호
• /
• pp.54-57
• /
• 2008

Magnetic torquer하는 인공위성의 초기 자세제어에 사용 되는 부품으로 지구자기장하에서 자기 쌍극자 모멘트가 받는 비틀림력을 이용하여 인공위성의 회전을 방지하고 특정 방향으로 인공위성의 자세가 안정되게 한다. 본 연구에서 개발 한 magnetic torque는 소형위성에 사용되는 것으로, magnetic torque거 자기적 특성뿐만 아니라 위성 발사 시 및 인공위성 궤도에서의 환경에서도 그 특성이 보장될 수 있게 환경시험을 하였다. 개발한 magnetic torquer는 포화 자기 쌍극자 모멘트가 $15Am^2$, 선형도 특성을 보이는 구간이 ${\pm}12Am^2$이고 선형도가 0.3% 미만이면서 질량이 0.46 kg이고 소비전력이 자기 쌍극자 모멘트가 $10Am^2$에 1 Watt 이였다.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.43-51
• /
• 1998

Most of fuel-injection system operated with mechanical methods are difficult to control the injection quantity and injection timing as well as injection rate exactly. Moreover high pressure injection scheme is never be realized with conventional one. On the other hand, serious air pollution can be lessened with injection system equipped with those functions. Therefore, electronically controlled Unit Injuctor(UI) appeared to satify above mentioned desires. However, it is still difficult that the most important part, especially solenoid valve, is analyzed precisely, because of the existence of complex combination of electromagnetics, electrics and dynamic problems. In this study, experimental and theoretical analysis are accomplished for understanding of solenoid valve characteristics and further its design. As the result, the follows are obtained 1) As the increase of wire diameter, the response time became shorter and optimal inductance existed in relative with the response time and wire diameter. 2) According to increasing input voltage, the traction force increased, otherwise the response time was shortened. 3) As the increase of armature stroke, the traction force decreased and the response time became longer.

• 한국자기학회지
• /
• 제26권3호
• /
• pp.81-85
• /
• 2016

본 논문에서는 제작공차에 의해 전기기기 및 소자 관련 제품에서 발생하는 성능함수의 변동특성을 예측하기 위해서 성능 모멘트 적분법을 도입하였다. 성능함수의 확률론적 분포특성을 판단할 수 있는 평균과 분산을 효율적으로 계산하기 위해서 정규분포로 변환된 성능함수 공간과 혼합형 평균치 기법을 채용하였다. 제안된 기법의 수치적인 효율성과 정밀도를 검증하기 위해서 간단한 수학예제와 스피커 모델에 적용하여 예측된 성능함수의 확률분포 특성을 차원감소법과 몬테카를로 수치모사법의 결과와 비교하였다.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.135-141
• /
• 2013

This paper proposes an efficient fault detection method for onboard degaussing coils which are installed to minimize underwater magnetic fields due to the ferromagnetic hull. To achieve this, the method basically uses field signals measured at specific magnetic treatment facilities instead of time-consuming numerical field solutions in a three-dimensional analysis space. In addition, an analytical design sensitivity formula and the linear property of degaussing coil fields is being exploited for detecting fault coil positions and assessing individual degaussing coil currents. Such peculiar features make it possible to yield fast and accurate results on the fault detection of degaussing coils. For foreseeable fault conditions, the proposed method is tested with a model ship equipped with 20 degaussing coils.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.62-67
• /
• 2013

본 논문에서는 전자기 관련 제품의 효율적인 신뢰도 기반 최적설계를 위해 확률구속조건을 평가하는 기법으로 해의 안정성과 효율성이 우수한 목표 성능치법을 제시 하였다. 목표 성능치법을 적용한 신뢰도 기반 최적설계의 효율성 검증을 위하여 스피커 모델과 초전도 자기에너지 저장장치 모델에 대한 최적설계를 수행하였고, 이를 기존 신뢰도 지수법을 적용한 최적설계 결과와 비교하였다. 또한 몬테카를로 수치모사기법을 이용하여 도출된 최적해의 신뢰도를 재 계산 후 비교함으로써 제안된 기법의 신뢰도 평가 결과의 정밀도를 검증하였다.