• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.23-27
• /
• 2004

GHz 대역용 전파흡수체의 개발에 있어 Cast Alnico magnets을 자성손실재로 이용하여 우수한 전파흡수특성을 나타내는 새로운 전파흡수체를 개발하였다. 특히 본 연구에서 개발한 전파흡수체는 폐처리된 Cast Alnico magnets을 이용한 것으로 이는 환경문제와 자원절약의 문제를 고려할 때 중요한 의미를 갖는다. 본 연구에서 개발한 Cast Aliico magnets을 이용한 전파흡수체는 X-band와 C-band를 고려한 전파흡수체로서 우수한 전파흡수특성 나타낸다.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.172-175
• /
• 2005

Sometimes, it is more convenient to use paint-type and spray-type EM wave absorbers than bulk-type or sheet-type. Thus, in this paper, we prepared paint-type and spry-type EM wave absorbers. The proportion of ferrites to paints, particle size of magnetic material, and kinds of paint should be considered to prepare a superior paint-type EM wave absorber. There is no big gap between spray-type and paint-type in EM wave absorption of EM wave absorbers prepared with same composition.

• 한국전자파학회논문지
• /
• 제24권9호
• /
• pp.892-899
• /
• 2013

본 논문에서는 (서브)밀리미터파 대역에서 산란 계수 정밀 측정이 어려운 요인 및 보다 정확한 측정을 하기 위한 방안을 기술하였으며, G-band(140~220 GHz)에서의 측정 사례를 제시하였다. 우선 마이크로파 대역과 (서브)밀리미터파 대역에서 사용되는 산란 계수 측정시스템(벡터회로망 분석기)의 동작 원리에 대한 차이점을 파악하고, (서브)밀리미터파 대역 산란 계수 측정시스템을 보다 잘 운영하기 위한 방안을 기술하였다. 그리고 더 좋은 도파관 전송 특성 및 연결 반복도를 얻기 위한 방안과 반사 계수 크기가 작은 피측정기를 정밀 측정하기 위한 방안을 기술하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.150-151
• /
• 2015

In this study, the electromagnetic shielding performance of mortar with different metal fiber, as part of the development of a electromagnetic shielding construction material, was measured according to KS C 0304. The results showed that the amorphous steel fibers can shield electromagnetic effectively than the oter conventional steel fibers. The superior performance of the amorphous steel fiber may be attributed its plate shape geometry.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.47-54
• /
• 2013

본 연구는 국내 최초로 개발된 직접 비교법을 이용한 W-band 밀리미터파 전력 표준 전달 시스템에 대한 것이다. 이 시스템은 75~110 GHz 대역에서 W-band 도파관형 전력감지기의 실효 효율과 교정 인자를 측정하기 위하여 개발되었다. 전력 표준 전달 시스템 구성의 핵심 요소인 방향성 결합기의 반사 특성 평가 기법을 소개하고 실험 결과를 보인다. 구현된 시스템을 이용하여 측정하고자 하는 전력감지기의 교정 인자 측정 결과를 보이고, 불확도 요인에 대하여 고찰한다. 측정 결과를 기준값과 비교하여 W-band 밀리미터파 전력 표준 전달 시스템에 의한 측정의 유효성을 검증한다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.150-158
• /
• 2016

This paper reports on a study of LiNiZn-ferrite composite as a radiation absorbent material (RAM). The electromagnetic (EM) wave absorbers are composed of an EM wave absorbing material and a polymeric binder. The surface morphology, chemical composition, weight percent of the ferrite composite of the toroid sample, magnetic properties, and return loss are investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and network analyzer. For preparing the absorbing sheet, chlorinated polyethylene (CPE) is used as a polymeric binder. The EM wave absorption properties of the prepared samples were studied at 4 - 8 GHz. We can confirm the effects of the thickness of the samples for absorption properties. An absorption bandwidth of more than a 10-dB return loss shifts toward a lower frequency range along with an increase in the thickness of the absorber.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.33-36
• /
• 2009

In order to increase the magnetic loss for electromagnetic(EM) wave absorption, the soft magnetic $Fe_{73}Si_{16}B_7Nb_3Cu_1$(at%) alloy strip was used as the basic material in this study. The melt-spun strip was pulverized using an attrition mill, and the pulverized flake-shaped powder was crystallized at $540^{\circ}C$ for 1h to obtain the optimum grain size. The Fe-based powder was mixed with 2 wt% $BaTiO_3$, $0.3{\sim}0.6$ wt% carbon black, and polymer-based binders for the improvement of electromagnetic wave absorption properties. The mixture powders were tape-cast and dried to form the absorption sheets. After drying at $100^{\circ}C$ for 1h, the sheets of 0.5 mm in thickness were made by rolling at $60^{\circ}C$, and cut into toroidal shape to measure the absorption properties of samples. The characteristics including permittivity, permeability and power loss were measured using a Network Analyzer(N5230A). Consequently, the properties of electromagnetic wave absorber were improved with the addition of both $BaTiO_3$ and carbon black powder, which was caused by the increased dielectric loss of the additive powders.

• 한국항해학회지
• /
• 제19권4호
• /
• pp.93-102
• /
• 1995

A design method of an electromagnetic wave absorber with ferrite fins in the second layer, which has very wide band frequency characteristics, is proposed and discussed. A theoretical model using the equivalent material constants method is adopted, assessed for its accuracy by comparision with the Hashin-Shtrikman formulas and compared with the conventional absorbers. Based on the model, a wide band electromagnetic wave absorber with excellent reflectivity frequency characteristics in frequency range of 30MHZ to 3530MHZ has been designed.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.8-16
• /
• 1997

A wide band design method of an electromagnetic wave absorber with using exponentially tapered ferritic is proposed and discussed. A theoretical model using the equivalent material constants method is also proposed to analyze the regions varying sptially in the shape of ferrite. Based on the developed model, wide band electromagnetic wave absorbers with excellent reflectivity frequency charaateristics in the freqency rang eof 30MHz to 2,150MHz or 2,430MHz were designed.