• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1069-1076
• /
• 2014

본 논문은 능동위상배열 레이더가 여러 개의 표적을 탐지/추적하기에 효과적인 수신빔 구조에 대해 기술하고 있다. 위상배열 레이더가 갖는 특성 중 하나는 원하는 방향으로 빔을 조향하고, 디지털적으로 여러 개의 빔을 동시에 형성하는 것이다. 이와 같은 디지털 빔 형성 수신빔 구조를 통해서 동시 다발적으로 발생하여 접근하는 위협 표적을 빠르고 정확하게 탐지하는 방식을 제안한다. 본 논문에서 제안된 기법들은 시뮬레이션을 통해서 표적의 탐지 정확도 성능을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.207-209
• /
• 2005

Ultra wide band electromagnetic energy can be transmitted to a far field by emitting the nanoseconds high voltage pulse electromagnetic energy via an antenna. This UWB EM energy is expected to be used in post-packing pasteurization of food, detection of buried objects or underground water veins and caves and the treatment of waste water or polluted gas. The nanoseconds pulse forming for UWB generation using high voltage blumlein line and an ultrafast switch is mentioned.

• 소성∙가공
• /
• 제32권6호
• /
• pp.303-310
• /
• 2023

Electrohydraulic forming(EHF), one of the high-speed forming method, can supplement the weak point of previous forming process such as deep-drawing and electromagnetic forming. Indeed, EHF is time-consuming process during installing wire before experiment that hard to apply to industry. In this research, applying wireless electrode, the formability of SUS430 sheet was compared through EHF experiments using wire-installed electrode and the other, wireless. Although the power was a little lacking, the advantages of the experiment using wireless electrode could be confirmed with checking the optimal location of electrodes where the plasma is generated and comparing free-bulging height depending on former and later condition of electrodes with performing several single and multistage experiments for same voltage, 6 kV.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.44-49
• /
• 2008

The characteristic of magnesium alloy is the most light in utility metal, the effect of electromagnetic wave interception, excellent specific strength and absorptiveness of vibration. Although magnesium alloy with above characteristic is a subject matter which is suitable in world-wide tendency of electrical component frame, sheet magnesium alloy is difficult to process. Therefore, forming analysis of sheet magnesium alloy and applying warm-working to process are indispensable. Among Finite element method, the static implicit finite element method is applied effectively to analyze sheet magnesium alloy stamping process, which include the forming stage. In this study, it was focused on the crack, wrinkling and spring back on sheet magnesium alloy stamping by the static implicit analysis. According to this study, the result of simulation will give engineers good information to access the forming technique on sheet magnesium alloy. And its application is being increased especially in the production of electrical component frame for the cost reduction, saving of defective ratio, and improvement of Productivity.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.62-66
• /
• 2003

Novel coupled line phase shifters and its equivalent phase delay line for compact broadband phased array antennas are proposed. These phase control circuits are designed to be less complex, small size and to use a less number of active devices. The phase shifter is able to control a 120$^{\circ}$ phase shift continuously, and the phase delay line for a reference phase has a fixed 60$^{\circ}$ shifted phase. Both have the low phase error of less than $\pm$3.5$^{\circ}$ and the low gain variations of less than 1 ㏈ within the 300 MHz bandwidth. These proposed circuits are adequate to form the efficient beam-forming networks with compactness, broadband, less complexity, and low cost.

• 소성∙가공
• /
• 제16권3호
• /
• pp.178-186
• /
• 2007

Rheo-forging process of aluminum alloy is suitable for large parts of net shape without defects and excellent mechanical properties in comparison with conventional die casting and forging process. To control the microstructure of the product with high mechanical properties in rheo-forming, solid fraction is required to prevent porosity and liquid segregation. Therefore, in rheo-forging process, die shape, pressure type and solid fraction are very important parameters. The defects such as porosity, liquid segregation and unfitting phenomena occur during rheo-forging process. To prevent these defects, mechanical properties and microstructure analysis of samples versus the change of pressure are carried out and the problem and its solutions are proposed. Also, the mechanical properties versus various pressures were compared with and without heat treatment. The alloys used for rheo-forming are A356 and 2024 aluminum alloy. The rheology material is fabricated by electromagnetic process with controlling current and stirring time.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.519-527
• /
• 2005

Recently, weight reduction of vehicles has been of great interest and consequently the use of low-density materials in the automotive industry is increasing every year. However, the substitution of one material for another is not simple because it accompanies several problems, for example, weakness in the strength and stiffness and difficulty in the joining. To overcome these problems, the structure of the automobile redesigned totoally. Aluminum spaceframe is rapidly being adopted as a body structure for accommodating lightness, stiffness and strength requirement. In aluminum spaceframe manufacturing, it is often required to join aluminum tube. However, there are few suitable methods for joining aluminum tube, so that much interest has been focused on testing suitable joining methods. Joining by electromagnetic forming (EMF) can be useful method in joining aluminum tube, which offers some advantages compared with the conventional joining methods. In this paper, joining by EMF was investigated as a pre-study for applying an automotive spaceframe. Finite element simulations and strength tests were performed to analyze the influence of geometric parameters on joint strength. Based on these results, configurations of axial joint and torque joint were suggested and guidelines for designing EMF joint were established.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.677-681
• /
• 2014

A high voltage pulse generator was fabricated to radiate ultrawide band electromagnetic pulse. A coaxial type of Blumlein pulse forming line is employed to produce a pulse of high voltage (>300 kV) and short pulse duration (~5 ns). A helical strip/wire type of air-cored pulse transformer was used to charge the Blumlein pulse forming line up to more than 300 kV. A peaking switch is essential to make the pulse rise time as fast as possible. Typically, the rise time is ~500 ps. The output pulse of the generator is radiated into air through an exponentially tapered TEM horn antenna. The electric field intensity of a radiated pulse was measured as a function of the distance from the transmitting horn as well as the output voltage of the peaking switch. The peak-to-peak value of the electric field intensity at 10 m from the TEM antenna was~100 kV/m.

• 한국전자파학회논문지
• /
• 제29권6호
• /
• pp.449-456
• /
• 2018

본 논문에서는 마이크로파 무선전력전송에 적용될 수 있는 여러 다중 빔 형성 방법을 제안한다. 기존의 다중 빔 형성방법은 능동소자패턴(active element pattern: AEP)을 고려하지 않기 때문에 실제 시스템에 적용 시 의도한 빔 형성과 오차가 발생하게 된다. 이를 해결하기 위해 능동소자패턴의 평균을 고려하는 방법과, 변형된 푸리에 급수 방법을 통해 모든 능동소자패턴을 고려하는 방법이 제안되었다. 또한, 부엽과 null 제어를 위하여 Dolph-Tschebyscheff 방법에 중첩의 원리를 적용하여 다중 빔을 형성하는 방식을 제안하였다. 제안된 방식을 사용하여 다중 빔 형성 시 의도된 빔 형성과의 오차가 감소하는 것을 확인하였으며, 다중 빔 형성을 하며 부엽 제어를 동시에 할 수 있는 것을 확인하였다.

• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.431-440
• /
• 2012

본 논문에서는 새로운 구조의 빔 성형 배열 안테나를 제안한다. 제안된 빔 성형 배열 안테나는 새로운 구조의 저손실 재구성 분배기 및 입체 배열을 통해, 빔 방향 및 빔 폭 제어 특성을 가진다. 여기서, 제안하는 재구성 분배기는 개별 안테나로의 재구성 가능한 RF 전력 분배 기능을 가지고 있기 때문에, 본 안테나에서의 핵심 기술이라 할 수 있다. 또한, 제안된 안테나의 연구 및 특성 입증을 위해, 본 논문에서는 입체형 빔 성형 배열 안테나를 재구성 분배기와 함께 구현하였으며, 실험적으로 RF 전력 분배 모드 제어를 통해 1:1부터 1:N까지 다양한 방사 모드를 가지고 있는 것을 확인하였다.