• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.62-70
• /
• 2006

This paper presents a new power plane design method incorporating a single geometry derived from a unit cell of photonic bandgap(PBG) structure. This method yields constantly wide suppression of parallel plate resonances from 0.9 GHz to 4.2 GHz and is very efficient to eliminate PCB resonances in a specified frequency region to provide effective suppression of simultaneous switching noise(SSN). It is shown that with only two cells the propagation of unwanted high frequency signals is effectively suppressed, while it could provide continuous return signal path. The measured results agree very well with theoretically predicted ones, and confirm that proposed method is effective for reducing EMI, with measured near-field distribution. The proposed topology is suitable for design of high speed digital system.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.174-177
• /
• 2005

Offline switching power supplies have high voltage and high current switching waveforms that generate Electromagnetic Interference(EMI) in the form of both conducted and radiated emissions. Consequently, all off-line power supplies must be designed to attenuate or suppress EMI emissions below commonly acceptable limits. Electrodeless fluorescent lamp's ballasts have AC/DC flyback converter, so we must control the EMI emissions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.152.2-152
• /
• 2001

This paper investigates the effect of the conducted EMI Electromagnetic Interference and the switching loss which occurs from the switching devices in the switching period of the unipolar and limited unipolar switching circuits. The three main sources of conducted EMI and switching loss in the unipolar and limited unipolar switching circuit come from the switching devices, the number of switching times in the switching period and their switching waveform. In this paper, these three parameters are used to determine the conducted EMI which generated from the unipolar and limited unipolar switching circuits and to improve the limited unipolar switching circuit which uses the power MOSFET´s as the switching devices. The significant reduction of Ire conducted EMI ...

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.108-113
• /
• 2011

There are a lot of PDP TV for a plasma discharge pulse voltage generated by the use of electromagnetic waves. EMI mesh film is near Infrared ray caused by malfunction of the remote control intended to prevent this phenomenon. In this study, the formation of fine pattern by making the mold is imprinted on the film sheet. EMI mesh film has been granted by filling in the conductive material region imprinted with electroforming in the manufacture of resistance. The fine patterns fabricated with electroforming facility thickness of homogenization process technology were established to optimize the working conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.455-462
• /
• 2003

Switching PFC converters are widely used not only to comply the power quality specification but also for maximum efficiency. However switching PFC converters generate serious electromagnetic interference(EMI). In this paper to solve this problem, we applied the APW(Anti-Phase Winding) and RPWM(Random PWM) technique to PFC boost converter and obtained good results. Simulation and experimental results show the improved harmonics and reduced EMI effect in air-conditioner system.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1959-1961
• /
• 2002

Requirements for high-efficiency equipment for energy saving are rapidly increasing recently keeping pace with development of digital and semiconductor technology. Accordingly, there are many changes and development in ballast. Ballast currently in use are Magnetic ballast (Coiled Type) and Electronic ballast. Electronic ballast produces incredible energy saving effect, but falls short of confidence instead. In addition, use at higher frequency through switching device creates Electromagnetic Interference (EMI) and high frequency. EMI creates low quality of equipment, damage in facilities and low productivity by leading miss operation of equipment, and interferes with surrounding machines. In this analysis I am going to examine characteristics of EMI on the Electronic ballast of FLR32SS one type pursuant to annex 3 of Electric Goods Technology Standard, and counter technology.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.232-242
• /
• 1990

This paper presents the formulas for load currents of a cascaded transmission line excited by external plane wave using Smith's method for EMI currents of a single transmission line. Calculating under the condition that the lines having same characteristic impedence are cascaded, numerical results of this study are well agreed with those of Smith and show the fact that as the width and length of the line reduced to 1/10 respectively, the load-EMI currents decreased by about 40dB.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.217-221
• /
• 2006

Offline switching Power supplies have high voltage and high current switching waveforms that generate Electromagnetic Interference(EMI) in the form of both conducted and radiated emissions. Consequently, all off-line power supplies must be designed to attenuate or suppress EMI emissions below commonly acceptable limits. Electrodeless fluorescent lamp's ballasts have AC/DC flyback converter, so we must control the EMI emissions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.194-195
• /
• 2002

투명 전도성 박막은 저방출 코팅, 평판디스플레이의 투명전극, 플라즈마 디스플레이 패널(PDP)의 전자파 장해 차폐 둥의 넓은 영역에서 사용되고 있다 특히 PDP의 전자파 장해(electromagnetic interference; EMI)를 막기 위한 필터는 광학적으로 가시광선영역의 높은 투과율과 전도성이 우수한 전기적 특성을 갖고 있어야 한다 이러한 고 효율의 투명전도성 박막은 일반적으로 (산화물-금속-산화물) 형태로 제작된다(1). (중략)