• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1048-1054
• /
• 1999

It is important to study the shielding effectiveness(SE) of reinforcing material of plastic composite materials against the electromagnetic(EM) waves. In this paper, SE of the shielding material of EM waves was investigated with actual experiments. The materials used in this study were made up of film, fiber and powder of conductive materials - Cu, Al, CF etc. Also, The resin film was used as matrix. The experiment was carried out by using a shielding evaluator(Shielding box) TR17302 with an ADVANTEST spectrum analyzer, model R3361C. It was found from the experimental results that copper, aluminum and carbon fiber were good candidates as a shielding material against the EM waves with increasing the SE as the composite was laminated. The characteristics of the SE against the EM waves depended on a mode of preparation of specimen. The effects of interval of wires on the SE were studied when the orientation and the space of Cu wires were changed. The SE strongly depended on the. orientation and the space of the Cu wire. SE decreased as the space of the Cu wires was increasing.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.16-21
• /
• 2002

On the contrary to the progress of the electronic industry and radio communication technologies, many social problems such as EMI, due to unnecessary electromagnetic(EM) wave are serious with the increased use of EM wave. It is required that the absorbing capability of an EM wave absorber is more than 20 dB, the bandwidth of which is required from 30 MHz to 18 GHz to satisfy the international standard about an anechoic chamber for EMI/EMS measurement$^{[1]}$TEX>. However, the absorbing frequency band of the conventional EM wave absorbers satisfying more than 20 dB is very narrow, for examples, from 30 MHz to 400 MHz in ferrite tile type and from 30 MHz to 870 MHz in ferrite grid type, respectively. In this paper, we proposed and designed a new tripe absorber with broadband characteristics covering the frequency band from 30 MHz to 10 GHz by use of the equivalent material constants method (EMCM)$^{[2]~[4]}$TEX>.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1116-1120
• /
• 2010

Low cost patch array antenna for high sensitivity electromagnetic(EM) sensor is presented. The operating frequency band of the antenna is 24.05~24.25 GHz. Array structure is the symmetrical pattern by Chebyshev polynomial and the feed point is located in the middle of the array. Also, the gain of the array antenna can be increased by the side wings which are connected with the ground plane. It is proved through simulation and the measurement results that the operating frequency and the side-lobe level(SLL) are rarely changed when the inclined angle of the side wings is varied.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.1
• /
• pp.25-32
• /
• 2009

A non-destructive testing (NDT) method for evaluating physical properties of concrete including the compressive strength is highly desirable. This paper presents such an NDT method based on measurement of electromagnetic (EM) properties of the material. Experiments are carried out on cement mortar with different water/cement (W/C) ratios. Their EM properties including the conductivity and the dielectric constant are measured at different exposure conditions and curing periods over a wide frequency range of the EM wave. The compressive strength of these specimens is also tested. It is found that both the conductivity and the dielectric constant increase as the W/C ratio decreases and the curing period increases, which lead strength development in the specimens. A linear correlation is observed between the averaged EM properties over the 5 to 20 GHz frequency range and the measured compressive strength, demonstrating the effectiveness of the EM property-based NDT method in evaluating strength of OPC mortar.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1329-1334
• /
• 2003

We prepared EM wave absorbers by using recycled Ba ferrite far GHz frequency, and investigated the effects of carbon additions and preparation temperatures on their EM wave absorption properties. We clarified that it is very important to consider carbon amounts in Ba ferrite and preparation temperature for Ba ferrite EM wave absorbers with high quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1108-1119
• /
• 2016

This paper presents the spectral analysis and radiation pattern of low-frequency electromagnetic(EM) leakage signals according to the fundamental operations of smartphones. The EM leakage signals generated by the activation of four I/O sensor modules such as a touch-screen, a camera, a microphone and a speaker are captured by the commercial near-field magnetic probe with 1cm spatial resolution. The analysis results show that the leakage of the EM wave occurs strongly around the activated I/O sensor modules, AP(Application Processor) and memory modules. Also, the distinguishable frequency characteristic is shown in each spectrum of EM leakage signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.902-915
• /
• 2017

In recent years, mobile devices have become increasingly multi-functional and high performance, resulting in a dramatical increase in processing speed. On the other hand, the size of device is reduced, circuits inside the device are more easily exposed to electromagnetic interference radiated from antenna or adjacent circuits, degrading the system performance. To prevent this, it is necessary to design the device considering the electromagnetic characteristics with EM simulation at the design stage of product. However, the EM simulation takes a long analysis time and require high-level system resources for fast analysis. In this paper, an equivalent circuit modeling method for a round wire is proposed using a PEEC method and the electromagnetic coupling from a dipole antenna to a transmission line is analyzed in frequency domain. And compared with the result of electromagnetic simulator. As a result, PEEC method shows good agreement with those of electromagnetic simulation, in a much more short time.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.198-204
• /
• 2020

This paper designs a electromagnetic-log (EM-Log) aided navigation filter for maritime environment without global navigation satellite system (GNSS). When navigation is performed for a long time, Inertial navigation system (INS)'s error gradually diverges. Therefore, an integrated navigation method is used to solve this problem. EM-Log sensor measures the velocity of the vehicle. However, since the measured velocity from EM-Log contains the speed of the sea current, the aided navigation filter is required to estimate the sea current. This paper proposes a single model filter and interacting multiple (IMM) model filter methods to estimate the sea current and analyzes the influence of the sea current model on the filter. The performance of the designed aided navigation filter is verified using a simulation and the improvement rate of the filter compared to the pure navigation is analyzed. The performance of single model filter is improved when the sea current model is correct. However, when the sea current model is incorrect, the performance decreases. On the other hands, IMM model filter methods show the stable performance compared to the single model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.562-569
• /
• 2009

Recently, Hi-pass system(non-stop electric toll collection) using DSRC is working. However, it has various problems such as system errors by EM wave interference or multi-path reflection. The EM wave absorber is able to solve these problems. In this paper, we designed and fabricated EM wave absorber using amorphous substance. As a result EM wave absorber with composition of amorphous metal powder:CPE=45:55 wt.% has the thickness of 2.65 mm and absorption ability was higher than 40 dB at 5.8 GHz.