• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.140-143
• /
• 2003

자기부유기는 전자력을 이용해서 쇠구슬을 공중에 떠있게 할 수 있는 장치이다. 본 논문에서는 자기 부유기의 기본 원리와 모델링에 관해 소개하고, 디지털 신호처리와 PWM전력변환기를 사용한 자기 부유기를 직접 제작하고 실험을 통해 성능을 검증하였다. 자기부유기의 원리는 고속회전기에 사용되는 자기베어링이나 자기부상 열차의 부상 시스템에 응용될 수 있다. 또한 전기공학 분야의 다양한 교과과정에서 습득한 지식을 활용할 수 있는 학부 프로젝트 실험 주제로 적합하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.813-814
• /
• 2006

The squirrel case induction motor has widely used in the driving of the blowers but it is low efficiency and hard to control. So, the damper is used for the control of a flow and it cause to low the driving efficiency. Our laboratory has proposed the single-phase SRM(switched reluctance motor) for driving blowers. It has salient pole structure and can be reduced a number of semiconductors than three-phase SRM. But it can not be starting by itself and has heavier torque ripple than three-phase SRM. For self-starting the single-phase SRM is required the starting device which place the rotor at the rising inductance slope. On this paper, the electromagnet starting device is designed to generate the starting torque and to fix the rotating direction of the single-phase SRM which is fabricaed to use a blower.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1218-1223
• /
• 2009

LIM(Linear induction motor)s are the main type of motors used for urban Maglev vehicles because they are less expensive to operate at a lower speed than linear synchronous motors. An LIM generates an attraction force while running, which perturbs the air gap of the electromagnet. This undesirable air gap variation could result in the mechanical contact of an electromagnet with the reaction plate. For this reason, the magnitude of the air gap variation must be limited within a certain range. The air gap changes when running the 1/2 vehicle under development for testing are analyzed through a test on the test track at KIMM. The results from this study could be used to minimize the air gap variations due to attraction force from LIM.

• 한국초등과학교육학회지:초등과학교육
• /
• 제29권2호
• /
• pp.233-241
• /
• 2010

The purpose of this study was to apply the instruction consulting model for elementary science lesson with novice teacher. In this study the PIE(Preparation, Implementation and Evaluation stage) instruction consulting model was used. This model was introduced and offered during the electromagnet unit for sixth graders. The results of this study were as follows. First, in the assessment of the teacher's satisfaction with the instruction consulting the client teacher was found to be very satisfied. Second, the inquiry and scientific achievement for the students of the client's class were to increase in the experimental group, which demonstrated a statistically significant difference. Given the above results, the instruction consulting applied with the PIE model for novice teachers, who desire to raise the success rate of the experiment for students in the electromagnet unit of the elementary science class, helped the teachers to teach the students.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.879-881
• /
• 2000

This paper treats the electromagnet type linear synchronous motor with induction operation. The proposed motor consists of the primary winding energized by variable frequency supplies and the secondary having an additional solid-conductor besides the field finding. The conductor is useful for not only the self-starting but also the damping effect In the synchronous drive. From the investigation by the experiment and the finite element analysis coupled with both electric circuit and motion equation we verify that the proposed motor is effective for practical use.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.36-40
• /
• 2012

This paper presents an experimental and numerical study on current limiting characteristics of a fault current controller (FCC). The FCC consists of an AC/DC power converter, a superconducting coil, and a control unit. Even though some previous researches proved that the FCC could adjust the fault current level, the current limiting characteristics by the superconducting coil should be investigated for design of the coil. In this paper, four kinds of model coils were tested; 1) air core, 2) iron core without any bias, 3) reversely magnetized core (RMC) using permanent magnets, and 4) RMC using an electromagnet. Based on a comparative study, it is confirmed that a RMC by an electromagnet (EM) could increase the effective inductance of the coil. In this paper, a numerical code to simulate the HTS coil with RMC was developed. This code can be applied to design the HTS coil with active reversely magnetized bias coil.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1940-1942
• /
• 2001

Magnetic Levitation System(MLS) levitates a steel ball to the desired position in the gravity field using electromagnetic force. MLS consists of light sensor to measure the position of steel ball and an electromagnet to control the position of the ball, that composes a feedback control system. This work does not use a steel ball with constant mass but variable mass steel balls as magnetic levitation targets. Differential equation of electric circuit for electromagnet and motion equation of the movement of steel ball are derived for modeling nonlinear system, that will be linearized at the nominal operating point. We propose a digital control that can levitate a steel ball of which weight is not known for ED-4810 system. Algorithm for estimating ball weight and feedback control are implemented in digital scheme under pentium PC equiped with A/D and D/A converter, ACL-8112, using C-language. Simulation and experimental results are given to show the usefulness of the proposed controller.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.81-90
• /
• 1995

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about characteristics of a solenoid valve in hydraulic modulator for controlling brake pressure. First, it was modeling the electromagnet by the permeance method. Second, it was modeling the commercial Maxwell poackage program. And then, a experiment was performed in order to justify modeling. The result of modeling coincided with teh result of experiment and commercial packabe program. As a result, these modelings will be able to use in analysis of dynamic character- istics of the solenoid valve for braking.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1447-1453
• /
• 2012

도시형 자기부상열차는 U 자형 전자석만을 사용하여 부상공극을 일정하게 유지하며 주행한다. U자형 전자석은 그 형상 특성으로 인하여 전자석 위치에 따라 안내력을 동시에 갖기 때문에 능동적 횡공극 제어가 없이도 차량을 레일에 따라 안내할 수 있는 장점을 갖는다. 그러나 횡공극을 제어하기 않기 때문에 횡진동이 증가하여 승차감 및 주행안정성에 악영향을 미칠 수 있다. 본 논문에서는 능동제어가 없이도 횡진동을 저감시키기 위한 방법으로 횡댐퍼 적용 효과에 대한 분석이 이루어진다. 이를 위하여 자기부상열차의 횡방향 고유진동특성을 우선 해석하고, 횡방향 댐퍼를 설치했을 때의 진동저감 효과 분석이 이루어진다. 정확한 횡진동 예측을 위하여 자기부상열차의 3 차원 다물체 동역학 모델을 사용하였다. 본 논문의 결과를 통해서 자기부상열차의 횡진동 저감을 위한 횡댐퍼 채택 제안에 활용하고자 한다.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.861-868
• /
• 2017

본 연구는 자기유변 겔의 강성 및 댐핑 제어에 필수적으로 요구되는 자기장 제어를 위한 자기장 발생기의 설계를 제안한다. 자기유변 물질은 자기장의 세기에 따라서 동적 점 탄성 특성이 바뀌는 스마트 물질로 진동 흡수기, 자동차의 서스펜션과 같은 분야에 사용되기 위해 여러 방면으로 연구되고 있다. 자기유변 물질의 어플리케이션 적용을 위해 현재 사용되고 있는 자기장 발생기의 종류로는 전자석과 영구자석이 있으며, 대부분의 실제 산업에서는 주로 전자석을 이용하여 자기장을 발생 및 제어한다. 하지만 전자석은 발열문제 등 여러 단점으로 인해 장시간 사용에 적합하지 않으며, 영구자석의 경우 자기장 세기의 변화에 필요한 자기유변 물질과 영구자석 간의 거리 조절을 위해 여분의 공간이 요구되어 시스템 부피가 커지는 단점이 있다. 따라서 본 연구에서는 자기 차폐 원리를 기반으로 한 자기장 발생기를 제안하여 기존의 전자석과 영구자석이 가지는 단점을 해결하고 장시간 사용 및 실제 산업에서 적용이 가능하도록 하고자 한다.