• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2014

Freezing hardiness of winter bud and branch of several pear (Pyrus pyrifolia) cultivars according to degree and duration of low temperatures was investigated by sprouting, electrolyte leaching rate and triphenyltetrazolium chloride (TTC). Sprouting rate as infected by degree and duration of low temperature were different between cultivars. The lower temperature, the longer duration, sprouting rate was decreased. Electrolyte leaching rate was showed above 30% at below $-30^{\circ}C$ treatment regardless of cultivars and duration. The lower temperature and the longer duration, Electrolyte leaching rate was increased. Electrolyte leaching rates of Manpungbae, Niitaka and Chuwhangbae at $-30^{\circ}C$ for 9 hours treatment which were observed high sprouting rate, were lower than those of other varieties. Absorbance rates by TTC test at $-21^{\circ}C$ treatment were 66.0 to 96.5% for 6 hours, 49.4 to 91.9% for 9 hours, and 37.3 to 89.4% for 12 hours. Freezing hardiness of pear cultivars at ecodormancy was different according to degree and duration of low temperature treatments.

• Corrosion Science and Technology
• /
• v.7 no.3
• /
• pp.179-181
• /
• 2008

With nano-$SiO_2$ and sulphate acid, a kind of colloid electrolyte is synthesized by sol-gel method. It is placed outside the reference electrode as a layer of gel electrolyte so as to decrease the leaching of $Cu^{2+}$ and increase the life of the reference electrode. The performance of the gel electrode in simulating soil solution is measured as follows: the potential of the electrodes ranging from 60 mV to 80 mV (vs. SCE) with potential variation no more than $\pm10mV$, enough resistance to polarization. The $Cu^{2+}$ effusion rate of the reference electrode without gel electrolyte is 3 times that with colloid electrolyte, which means that gel electrolyte can extend the life of the reference electrode significantly.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.269-273
• /
• 2007

Freezing hardiness of winter bud and branch according to dormancy level and low temperature, in persimmon (Diospyros kaki) cultivars, was investigated by electrolyte leaching rate, triphenyltetrazolium chloride (TTC) test, and sprouting. Electrolyte leaching rate was lowest in branch of 20th January and was highest in the 20th March. The electrolyte leaching rate of 'Fuyu' and 'Cheongdobansi' was high in the 20th January and was low in the 20th February, but 'Uenishiwase' and 'Nishimurawase' was opposed to that. 'Hachiva' was the middle level in the cultivars. Absence rate by TTC test was highest in the 20th January and was low in the others. The 20th March had a great decrease in $-10^{\circ}C$ treatment. The absence rate of 'Fuyu' and 'Uenishiwase' was low in the 20th January and March and was high in the 20th February. 'Nishimurawase' and 'Hachiya' had a high level irrespective of dormancy level. Sprouting was highest in the 20th February and was lowest in 20th March. Most cultivars were not sprout in $-20^{\circ}C$ treatment and 'Fuyu', 'Nishimurawase' and 'Cheongdobansi' was a little high level irrespective of dormancy level. 'Hachiya' was only high in the 20th January. Thus, freezing hardiness of persimmon was very weak low temperature after dormancy breaking and was not different between astringent and non-astringent persimmon.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.59-71
• /
• 2014

This study was conducted to find out the freezing hardness of apple tree as influenced by dwarfrootstocks, cultivars, and low temperature treatments. The dwarf-rootstocks used were M.9 and M.26, and three cultivars used were early-maturing 'Tsugaru', mid-maturing 'Hongro', and late-maturing 'Fuji'. Chilling temperatures were applied from $0^{\circ}C$ to $-40^{\circ}C$. Checking points of apple tree for freezing hardness were rootstock, trunk, feather, floral bud and foliar bud. Investigations were evaluated by the measure of water loss, electrolyte leaching, and sprouting. The results did not show the differences in water loss, electrolyte leaching, and sprouting by dwarf-rootstocks. Water loss of 'Fuji' was lower than that of 'Tsugaru' and 'Hongro', but sprouting ratio of 'Fuji' was higher than that of 'Tsugaru' and 'Hongro'. Water loss and electrolyte leaching increased as treated by lower temperature, while sprouting ratio decreased. In $-35^{\circ}C$ treatment, sprouting of rootstock and trunk part were higher than that of feather, while sprouting of floral bud was lower than that of foliar bud. Sprouting of bourse shoot at the accumulated low temperature in terms of $-10^{\circ}C$ per day was 100% in the 28 days, and sharply decreased about 50% in the 35 days. In conclusion, there were no differences in freezing hardness between M.9 and M.26, but freezing hardness of late-maturing cultivar was tended to stronger than that of early-maturing and mid-maturing cultivars. Freezing hardness of floral bud was extremely weak $-30^{\circ}C$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.6
• /
• pp.328-334
• /
• 2000

A lithium ion secondary battery using carbon as a negative electrode has been developed. Further improvements to increase the cell capacity are expected by modifying the structure of the carbonaceous material. There are hopes for the development of large capacity lithium ion secondary batteries with long cycle, high energy density, high power density, and high energy efficiency. In the present paper, needle cokes from petroleum were examined as an anode of lithium ion secondary battery. Petroleum cokes, MCL(Molten Caustic Leaching) treated in Korea Institute Energy Research, were carbonized at various temperatures of 0, 500, 700, $19700^{\circ}C$ at heating rate of $2^{\circ}C$/min for lh. The electrolyte was used lM liPF6 EC/DEC (1:1). The voltage range of charge & discharge was 0.0V(0.05V) ~ 2.0V. The treated petroleum coke at $700^{\circ}C$ had an initial capacity over 560mAh.g which beyond the theoretical maximum capacity, 372mAh/g for LiC6. This phenomena suggests that carbon materials with disordered structure had higher cell capacity than that the graphitic carbon materials.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.313-316
• /
• 2009

A zinc borosilicate glass having a low softening temperature of $490^{\circ}C$ has been investigated as a protective layer for Ag patterns against chemical reactions with a $I^-/I_3^-$ electrolyte in dye-sensitized solar cells (DSSCs). A thick glass layer was prepared by the typical screen printing and firing processes to obtain a final thickness of ${\sim}5{\mu}m$. The chemical leaching performance of the glass layer in the electrolyte revealed that the reactive Ag pattern can be significantly protected by utilizing the low softening protective layer. The electrical resistance of the FTO-coated glass substrate was effectively maintained at a low value of ${\sim}27{\Omega}$ as long as the glass layer was well densified at a sufficiently high temperature of ${\sim}520^{\circ}C$. The transmittance of the layer was near 60%, depending on the firing temperature of the glass layer.

• Journal of Environmental Science International
• /
• v.26 no.6
• /
• pp.797-802
• /
• 2017

This study aimed to remove organic matter and heavy metals that could affect the recycling of soils contaminated by heavy metals, by means of electrolysis, carried out simultaneously with the leaching of the soil. To ensure better experimental equipment, a soil electrolysis apparatus, equipped with spiral paddles, was used to agitate the heavy-metal-contaminated soil effectively. The heavy-metal-contaminated soil was electrolyzed by varying the voltage to 5 V(Condition 1), 15 V(Condition 2), and 20 V(Condition 3), under the optimal operating conditions of the electrolysis apparatus, as determined through previous studies. The results showed that the pH of the electrolyte solution and the heavy-metal-contaminated soil, after electrolysis, tended to decrease with an increase in voltage. The highest removal efficiencies of TOC and $COD_{Cr}$ were 18.8% and 29.1%, 38.8% and 4.2%, and 33.3% and 50.0%, under conditions 1, 2 and 3, respectively. Heavy metals such as Cd and As were not detected in this experiment. The removal efficiencies of Cu, Pb and Cr were 4.7%, 8.3% and 2.1%, respectively, under Condition 1, while they were 42.9%, 15.2% and 22.1%, respectively, under Condition 2, and 4.7%, 23.0%, and 24.9%, respectively, under Condition 3. These results suggest that varying the voltage with the soil electrolysis apparatus for removing contaminants for the recycling of heavy-metal-contaminated soil allows the selective removal of contaminants. Therefore, the results of this study can be valuable as basic data for future studies on soil remediation.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.76-81
• /
• 2001

In order to recover Au and Pd from the leaching solution of various electronic wastes by electrowinning, the electrochemical behavior of Au and Pd in hydorchloric acidic solution was investigated by means of voltammetry. The reduction potential of Au ion was 800mV and the limiting current appeared at 470mV in electrolytic solution of gold. The reduction potential of Pd ion was 500mv and the limiting current appeared at 150mV in electrolytic solution of Palladium. However, in Au-Pd electrolytic solution, the Potentials for reduction and the limiting current of Au decreased as the content of Pd in electrolyte increased, and the potentials for the limiting current of Au and Pd closed nearest together when percentage of Pd electrolytic solution was 37v71% in Au-Pd electrolyte.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.186-198
• /
• 2022

Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

• Journal of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.306-313
• /
• 1973

With the intention of obtaining technical data for the industrial production of ${\gamma}-MnO_2$ for dry cell depolarizer by electrolytic oxidation of acidic manganese sulfate solution made from domestic rhodochrosite, optimum conditions of ore leaching, purification of leached solution and electrolytic oxidation of divalent manganes to tetravalent were investigated using simulated micro pilot plant having a production capacity of 4 kg of $MnSO_4$ per day. The nature and quality of the products were investigated by means of chemical analysis, DTA, X-ray diffraction and electron microscopy. The cell activity of $MnO_2$were examined by cell discharging character measurements. The optimum electrolysis conditions were as follow: Temperature of the electrolyte, above $90^{\circ}C$; current density, 0.7${\sim}A/dm^2$; anode materials, graphite or lead ; concentration of electrolyte, $MnSO_4 50{\sim}150g/l $ g/l and $H_2SO_4/MnSO_4 = 0.15{\sim}0.25$. Under the best condition the current efficiency was 99% and the products were almost pure ${\gamma}-MnO_2$. The cell discharging character were good and almost the same as that of regular grade commercial electrolytic manganese dioxide.