• 제목/요약/키워드: Electrolysis alkaline aqueous

검색결과 9건 처리시간 0.022초

전기분해 알칼리수를 배합수로 활용한 고로슬래그 혼입 콘크리트의 강도 특성 (Strength Property of Concrete Mixed Blast Furnace Slag Using Electrolysis Alkaline Aqueous as Mixed Water)

  • 정수미;김주성;박선규
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.135-136
    • /
    • 2023
  • In this study, a concrete was prepared using an alkaline aqueous solution produced by electrolyzing potassium carbonate in order to improve the low initial strength of concrete using blast furnace slag. In order to confirm the increase in initial strength, the compressive strength of specimens was measured on the age of 7, 28 days. As a result, the blast furnace slag concrete using the electrolysis alkaline aqueous solution as the mixed water show high strength more than the blast furnace slag concrete using the general mixed water.

  • PDF

고로슬래그 및 전기분해한 알칼리 수용액을 사용한 하이볼륨 시멘트 경화체의 수화특성 (Hydration Properties of High Volume Cement Matrix Using Blast Furnace Slag and Alkaline Aqueous by Electrolysis)

  • 김선아;박선규
    • 한국건설순환자원학회논문집
    • /
    • 제5권1호
    • /
    • pp.8-13
    • /
    • 2017
  • 본 연구는 $CO_2$를 다량 발생시키는 시멘트의 사용량을 줄이기 위한 일련의 연구로서, 산업부산물인 고로슬래그 미분말을 다량 치환하고 기존 알칼리 자극제를 대체하여 전기분해한 알칼리 수용액을 사용한 하이볼륨 시멘트 경화체의 개발을 위한 기초적인 연구를 수행하였다. 즉, 일반적인 시멘트를 사용한 시험체와 고로슬래그 미분말 40%, 60%에 일반적인 물과 전기분해 알칼리 수용액을 사용한 시험체에 대하여 압축강도, XRD 및 SEM을 측정하였다. 그 결과, 고로슬래그 미분말을 사용하는 경화체에 있어서 알칼리 수용액을 사용할 시 강도가 증가하고 입자 표면에 수화물이 다량 생성되는 결과를 얻었다. 특히, 고로슬래그 미분말을 40% 치환하고 알칼리 수용액을 사용한 경우, 일반적인 시멘트 경화체 보다 높은 압축강도를 발현하였다. 그러나 본 연구는 재령 10일에 한정하여 실시한 연구로서, 고로슬래그 및 전기분해 알칼리 수용액을 사용한 시험체에 대한 추가적인 연구가 필요하다고 판단된다.

전기분해 알칼리수를 배합수로 사용한 고로슬래그 미분말 혼입 콘크리트의 내구성 (Evaluating the Durability of Concrete Combined with Ground Granulated Blast Furnace Slag using Electrolysis Alkaline Aqueous as Mixing Water)

  • 정수미;김주성;박선규
    • 한국건축시공학회지
    • /
    • 제23권4호
    • /
    • pp.349-358
    • /
    • 2023
  • 본 연구에서는 고로슬래그 미분말을 혼입한 콘크리트의 초기강도를 증진시키고, 탄산화 저항성과 염해 저항성을 향상시키기 위해 탄산칼륨을 전기분해하여 생성된 알칼리수를 배합수로 사용하여 콘크리트를 제작하였다. 초기강도 증진을 확인하기 위해 압축강도 측정을 진행하였으며, 촉진 탄산화 시험과 염소이온 침투저항성 시험을 진행하였다. 실험결과 일반 배합수를 사용한 콘크리트에 비해 전기분해 알칼리수를 배합수로 활용한 콘크리트의 초기강도가 증진된 것을 확인하였으며, 탄산화 저항성과 염소이온 침투저항성 또한 향상된 것을 확인하였다.

재생에너지 기반 알칼라인 수전해 장치(2 Nm3/hr) 위험요인 고찰 (A Study on Hazard of Renewable Energy based Alkaline Water Exectrolysis Equipment)

  • 김현기;서두현;김태훈;이광원;이동민;신단비
    • 한국수소및신에너지학회논문집
    • /
    • 제33권1호
    • /
    • pp.55-60
    • /
    • 2022
  • As interest in sustainable and eco-friendly energy sources is increasing due to various problems in the carbon society, a hydrogen economy using hydrogen as a main energy source is emerging. While the natural gas reforming method generates carbon dioxide, the water electrolysis method based on renewable energy is eco-friendly. The water electrolysis device currently being developed uses a 2 Nm3/hr class alkaline aqueous solution as an electrolyte and produces hydrogen based on renewable energy. In this study, risk assessment was conducted for these water electrolysis devices

전기분해 알칼리 수 및 고로슬래그 미분말 혼입 시멘트 경화체의 수화 특성 (Hydration Properties of Cement Matrix using Electrolysis Alkaline Aqueous and Ground Granulated Blast Furnace Slag)

  • 정용훈;김호진;박선규
    • 한국건설순환자원학회논문집
    • /
    • 제9권2호
    • /
    • pp.185-190
    • /
    • 2021
  • 시멘트는 현대 건설 산업에서 주된 재료로써 활용되지만 생산 시 발생하는 이산화탄소로 인해 지구온난화의 주된 원인으로 지목되고 있다. 이에 따라 시멘트 대체재로서 산업부산물을 활용하는 연구가 진행 중이며, 이 중 제철소에서 생산되는 고로슬래그가 대표적이다. 하지만 고로슬래그는 시멘트 대체재로써 사용 시 초기 강도 저하의 문제점을 지니고 있는데, 이는 고로슬래그 생산과정에서 만들어지는 입자 표면의 유리질 피막이 원인이다. 일반적인 수화반응에서 피막은 시멘트의 수화반응에서 생성되는 수산화칼슘이 경화체 내부 알칼리 환경을 조성하게 되고 이를 통해 파괴되는 것으로 알려져있다. 따라서 본 연구에서는 고로슬래그의 사용성능 개선 및 초기 강도 저하의 문제점을 해결하기 위하여, 기존에 고로슬래그 입자 표면의 막을 제거하기 위해 사용되어지는 알칼리 자극제 대신 전기분해를 통해 생성한 알칼리 수를 배합수로 활용하기 위한 연구를 진행하였다. 실험 결과, 고로슬래그와 알칼리 수를 활용한 시멘트 경화체에서 일반적인 배합수에 비해 높은 강도 발현 및 수화물 생성을 보였으며, 공극분석 결과 내부 공극률 및 공극분포에서 더욱 밀실한 구조를 지니고 있는 것으로 확인되었다.

알카리 수전해에서 전극 형상의 영향에 관한 연구 (A Study on Effect of the Shape of Electrodes in Alkaline Water Electrolysis)

  • 최수광;김종수;한진목;윤성호;김세웅;정영관
    • 한국수소및신에너지학회논문집
    • /
    • 제28권2호
    • /
    • pp.121-128
    • /
    • 2017
  • For an investigation on the effect of the shape of electrodes in alkaline water electrolysis, two kinds of stack with circular and square electrode array are used to visualize both for behaviors of hydrogen bubble around the electrodes and for measurements of hydrogen production from these two stacks. The electrolytes for the hydrogen production experiment were applied for 20 wt%, 25 wt%, 30 wt% and 35 wt% of KOH alkaline aqueous solutions. As a result, the adhesion length of bubbles attached around the square electrode in the visualization experiment was found to be 1.7 times longer compared with the attached around the circular electrode. In the hydrogen production experiments, the volume of hydrogen production of the stack by using circular electrode array was approximately 3% more than that of the stack with square electrode array. These observations may be caused by the effect of the bubbles attached to the around the electrodes obstructing mass transfer such as hydrogen exhaust and electrolyte supply.

수전해 시스템 성능 향상을 위한 능동 이온수송 기술 연구 (A Study on Active Ion Transport Technology to Improve Water Electrolysis System Performance)

  • 김현중;궈하오;김상영
    • 한국수소및신에너지학회논문집
    • /
    • 제34권2호
    • /
    • pp.132-140
    • /
    • 2023
  • In this study, rotary magnet holder (RMH) was manufactured to analyze the ion transport effect according to the rotating magnetic field for the hydrogen production efficiency by alkaline water electrolyte. In the experiment, the voltage signal according to the magnet arrangement inside the RMH, the rotation speed, and the rotation time was measured using the voltage measurement module. As a result of the voltage signal measurement experiment, the average potential difference increased as the rotation speed of the RMH increased. Through the results of the voltage signal measurement experiment, the most efficient magnet arrangement (case 2) was applied to the RMH to conduct a water electrolysis experiment. A 20% NaOH aqueous solution was filled in the electrolytic cell, and a direct current 2 V constant voltage was applied to measure the current value according to the RMH rotation to compare the hydrogen generation amount. When rotating at 100 RPM, the hydrogen production efficiency increased by 8.06% compared to when not rotating. Considering the area exceeding +25 mA, which was not measured at the beginning of the experiment, an increase in hydrogen production of about 10% or more can be expected.

전기분해수를 배합수로 활용한 모르타르의 탄산화 저항 특성 (Carbonation Resistance Property of Mortar using Electrolysis Aqueous)

  • 정수미;박선규
    • 한국건설순환자원학회논문집
    • /
    • 제10권3호
    • /
    • pp.204-210
    • /
    • 2022
  • 시멘트는 건설산업 분야에서 주된 이산화탄소의 원인으로 지목되고 있다. 시멘트의 제조과정에서 나오는 이산화탄소를 저감하기 위해 시멘트 대체재로 산업부산물인 고로슬래그를 사용하는 연구가 진행 중이다. 고로슬래그를 시멘트 대체재로 사용할 경우 장기강도 증진과 내화학성 향상 등의 장점을 지니고있다. 하지만 고로슬래그는 초기강도 저하의 문제점을 지니고 있다. 이는 고로슬래그의 생산과정에서 만들어지는 표면의 불투성 피막이 원인이다. 생성된 피막은 알칼리 환경에서 파괴되는 것으로 알려져 있으며, 이를 바탕으로 선행연구에서는 다양한 알칼리 자극제를 사용한 해결방안을 제시해왔다. 알칼리 자극제는 강알칼리성 물질이기 때문에 위험성이 존재하며, 비용이 고가인 단점을 가지고 있다. 본 연구에서는 고로슬래그의 초기 수화반응성을 향상시켜 고로슬래그를 치환한 모르타르의 초기강도를 확보함과 동시에 탄산화 저항성 증가 여부를 확인하기 위한 실험을 진행하였다. 실험결과, 알칼리 수를 활용한 모르타르가 일반 배합수를 사용한 모르타르에 비해 높은 강도발현을 보였으며, 내부에 더 많은 수화생성물이 있음을 확인했다. 또한, 알칼리 수를 배합수로 활용한 모르타르가 탄산화 저항성이 높은 것을 확인하였다.