• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.844-853
• /
• 2015

Recently, according to change of lifestyle and increase of concerning in health, needs of the smart clothing based on the vital sign monitoring have increased. Along with this trend, smart clothing for ECG monitoring has been studied various way as textile electrode, clothing design and so on. Smart clothing for ECG monitoring can become a comfortable system which enables continuous vital sign monitoring in daily use. But, smart clothing for ECG monitoring has a weakness on artifact during motion. One of the motion artifact caused by shifting of the electrode position was affected skin change by motion. The aim of this study was to suggest electrode locations for clothing of ECG monitoring to reduce of motion artifacts. Therefore, change of skin surface during the movement were measured and analyzed in order to find location to minimize motion artifacts in ECG monitoring clothing by 3D motion capture. For the experiment, the subjects consisted of 5 males and 5 females in their 20' with average physique. As a result, the optimal location for ECG monitoring was deducted under the bust line and scapula which have least motion artifact. These locations were abstracted to be least affected by movement in this research.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.414-417
• /
• 2002

This paper describes the possibility of analyzing gait pattern from the variation of the lower leg electrical impedance. This impedance is measured by the four-electrode method. Two current electrodes are applied to the thigh and foot., and two potential electrodes are applied to the lateral aspect, medial aspect, and posterior position of lower leg. We found the optimal electrode position for knee and ankle joint movements based on high correlation coefficient, least interference, and maximum magnitude of impedance change. From such features of the lower leg impedance, it has been made clear that different movement patterns exhibit different impedance patterns and impedance level.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.199-201
• /
• 2006

A lot of researches and experiments have been performed to make more efficient dye-sensitized solar cell. Among them, insertion of a grid electrode in DSC is one method to increase overall performance as being shortened distance of electrons' movement by diffusion. In this paper, we measured overall characteristics which is included voltage-current characteristic curve, efficiency, fill factor by comparison between DSC without and with grid electrode. As a result, we got maximum 1.8 times increase of efficiency and approximately 1.7 times rise of fill factor. And we experimented 8, 10, 12, 14mm of grid gap and compared their results to optimize grid gap which is able to incite the most effective movement of electrons. Consequently, we got the result that electrons' movement is the most effect ive when grid gap is approximately 12mm.

• Proceedings of the KWS Conference
• /
• 2002.05a
• /
• pp.22-25
• /
• 2002

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.318-323
• /
• 2004

When a strong electric field is applied between a sharply curved electrode and a blunt surface, the corona may result in a gas movement in the electrode gap which is directed toward the blunt surface. That is called the corona wind. It enhances heat and mass transfer between the surface and the surrounding gas. Moreover such enhancement causes no noise or vibration, which can be applied in complex, isolated geometries, and allows simple control of surface temperatures. This paper examines the relationship between the corona wind and the relative humidity. The facility consists of high voltage power supply thin tungsten wire, plate electrode, multimeter, microammeter and flow meter. Gas velocity is a linear function of voltage, relative humidity and is proportional to the square root of the current. The maximum velocities for the positive and negative corona discharge are 1.9 m/s (2.74 CMM/m), 1.5 m/s(2.15 CMM/m), respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.21-27
• /
• 2015

We propose a fabrication process of a 3-electrode type reflective display and ascertain the realized color panel. The first design is proceeded with basis on Ti electrode for fast panel fabrication, easy align process, and high reflection of a white image. To observe the particle movement at the lower electrodes and optimize the space between electrodes, we design the second patterns, from which we establish a fabrication process with the mixing of electronic ink, loading of this ink, electronic ink assembly, driving, and packaging. After aging process, we ascertain a normally driving panel with black, white, and blue color.

• Journal of Welding and Joining
• /
• v.29 no.2
• /
• pp.94-101
• /
• 2011

A lumped mass damped vibratory model was proposed for quantitative understanding of welding machine characteristics. An experimental setup was developed to determine the mechanical parameters (moving mass m, equivalent stiffness k and damping c) which govern the dynamic mechanical response of the resistance spot welding machine. During the test, acceleration of the electrodes for each level of applied load was measured by accelerometer, filtered and numerically integrated to find the corresponding velocity and displacement. The machine dynamic parameters were determined by finding the unknowns of the proposed model with experimental data. A Simulink model was proposed to investigate the influence of these mechanical parameters on the welding process. The electrode response was simulated by changing values of stiffness and damping. It was observed that both of the machine parameters(c, k) have significant effect on the response of electrode head.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.267-269
• /
• 1996

In this work, the influence of wire type conducting particles on the insulation reliability of GIS has been systematically investigated when outer electrode was dielectric coated by epoxy resin. For this purpose, coaxial cylinder-type electrode was adopted in 362 kV chamber and various size of Cu conducting particle was used and different gas pressure was applied. To prove the coating effect on the gas insulation, different thickness of epoxy coated outer electrode have been considered and the lift-off voltage and flashover voltage have been analyzed. The results show that the dielectric coated electrode has an remarkable influence on the reducing particle behavior in GIS system and enhancing the GIS insulation reliability.

• Applied Chemistry for Engineering
• /
• v.35 no.5
• /
• pp.473-477
• /
• 2024

The technology of harvesting energy wasted in daily life is becoming increasingly important for sustainable energy production and climate change. In this study, we investigated an electrochemical energy harvesting system using blue energy generated by the movement of electrodes. We observed that energy could be harvested based on the electrification phenomenon that occurs when an electrode comes into contact with an electrolyte, particularly when the electrode is modified with a self-as-sembled monolayer (SAM) containing the fluorocarbons. The static charges, which are generated by electrification based on the energy level difference between the electrode and the electrolyte, could be transferred to an external circuit. Additionally, we discovered that structural features of SAM molecules are related to the efficiency of energy harvesting, including the number of fluorocarbons. This system successfully powered an LED, proving the practicality of electrochemical harvesting using blue energy. The results suggest the potential for developing more efficient and high-output energy harvesting systems through the application of various SAM molecules.