• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.46-49
• /
• 1995

This paper deals with characteristics of magnet that the levitation and guidance forces at static state and we tested and evaluated its. Also we compared to effect of levitation force with material and shape of guide way, focus on evaluation and method of test for the magnet of Urban Transit Maglev vehicle.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.781-806
• /
• 2015

A unified formulation of finite layer methods (FLMs), based on the Reissner mixed variational theorem (RMVT), is developed for the three-dimensional (3D) coupled electro-elastic analysis of simply-supported, functionally graded piezoelectric material (FGPM) plates with open- and closed-circuit surface conditions and under electro-mechanical loads. In this formulation, the material properties of the plate are assumed to obey an exponent-law varying exponentially through the thickness coordinate, and the plate is divided into a number of finite rectangular layers, in which the trigonometric functions and Lagrange polynomials are used to interpolate the in- and out-of-plane variations of the primary field variables of each individual layer, respectively, such as the elastic displacement, transverse shear and normal stress, electric potential, and normal electric displacement components. The relevant orders used for expanding these variables in the thickness coordinate can be freely chosen as the linear, quadratic and cubic orders. Four different mechanical/electrical loading conditions applied on the top and bottom surfaces of the plate are considered, and the corresponding coupled electro-elastic analysis of the loaded FGPM plates is undertaken. The accuracy and convergence rate of the RMVT-based FLMs are assessed by comparing their solutions with the exact 3D piezoelectricity ones available in the literature.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.

• 설비공학논문집
• /
• 제13권4호
• /
• pp.289-294
• /
• 2001

A well defined electro-spraying and electro-static precipitator(ESP) experiment is carried out to investigate the charging characteristics of the submicron particles and the monodisperse particles. The basic idea is that the highly charged electro-sprayed droplets will be produced into the gas when the Coulombic repulsive force on the surface is higher than the surface tension of the spraying liquid. During this process many highly charged smaller droplets or ions, if the droplets are completely dried out, will be produced in the space. These charged species will be attached ion the particles and then eventually charge the particles. These charged particles will be easily collected with ESP. The experimental results show that the atomizer generated particles with geometric mean diameter (GMD) of 62nm are charged more than 90% even at the mean face velocity of 2.5m/s at the charging zone.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.595-602
• /
• 2013

An air circuit breaker (ACB) with novel double-breaker contact and permanent magnet actuator (PMA) is presented. Three-dimensional (3-D) finite element method (FEM) is employed to compute the electro-dynamic repulsion forces, including the Holm force and Lorentz force, which are acting on the static and movable contacts. The electro-dynamic repulsion forces of different contact pieces are computed, illustrating there is an optimal number of contact pieces for the ACB being studied. The electro-dynamic repulsion force of each contact, which varies from the outer position to the inner position, is also computed. Finally, the contacts of the double-breaker are manufactured according to the analyzed results to validate the simulations.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.102-111
• /
• 1996

This paper presents a proof-of-concept investigation on an active tension control using an ER (electro-rheological) brake actuator. Firstly, an ERF (electro-rheological fluid) which has an inherent reversible feature from Newtonian fluid to Bingham fluid upon applying an electric field is composed, and its property is tested to obtain intrinsic parameters of the Bingham model. An appropriate size of the ER brake is manufactured on the basis of the Bingham model, and dynamic characteristics of the brake are experimentally identified. After formulating a governing equation of motion of the tension control system, a sliding mode controller is designed to achieve a certain desired level of tension. Both simulation and experimental works are undertaken in order to demonstrate the efficiency and feasibility of the proposed active tension control method.

• Structural Engineering and Mechanics
• /
• 제23권5호
• /
• pp.525-542
• /
• 2006

On the basis of equilibrium equations for static electric and magnetic fields, two unknown functions related to electric and magnetic fields were firstly introduced to rewrite the governing equations, boundary conditions and initial conditions for mechanical field. Then by introducing a dependent variable and a special function satisfying the inhomogeneous mechanical boundary conditions, the governing equation for a new variable with homogeneous mechanical boundary conditions is obtained. By using the separation of variables technique as well as the electric and magnetic boundary conditions, the dynamic problem of a functionally graded magneto-electro-elastic hollow sphere under spherically symmetric deformation is transformed to two Volterra integral equations of the second kind about two unknown functions of time. Cubic Hermite polynomials are adopted to approximate the two undetermined functions at each time subinterval and the recursive formula for solving the integral equations is derived. Transient responses of displacements, stresses, electric and magnetic potentials are completely determined at the end. Numerical results are presented and discussed.

• 한국융합학회논문지
• /
• 제8권8호
• /
• pp.77-82
• /
• 2017

디스플레이 제조 공정에서는 패널의 이송 목적으로 컨베이어 시스템이 널리 사용된다. 이 컨베이어에는 정전기로 인한 제품 불량을 예방하기 위해 접지선이 다수 사용되는데, 이송 롤러의 회전 운동이나 말림 등의 원인으로 접지선이 단선되어 제품 불량으로 이어지는 경우가 빈번히 발생된다. 이런 문제 해결을 위해 접지선의 단선을 실시간으로 검출 가능한 시스템의 필요성이 커지고 있다. 따라서 본 논문에서는 컨베이어 구동부와 패널의 마찰로 발생되는 ESD(Electro-Static Discharge) 접지선의 단선 모니터링 시스템을 제안한다. 제안 시스템은 ATmega 2560 및 휘트스톤 브릿지(Wheatstone Bridge) 회로를 이용해 접지선의 단선 및 탈조 검출이 가능한 모니터링 시스템으로써, 접지선의 단선을 즉시 검출해 조치할 수 있으므로, 정전기로 인한 제품의 불량률을 줄일 수 있다. 본 논문에서 제안한 시스템은 접지선이 사용되는 산업의 생산 및 시험 장비에 적용 가능할 것으로 기대된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권1호
• /
• pp.33-33
• /
• 2003

No Abstract, See Full Text

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.35-40
• /
• 2008

최근 사파이어기판 위에 성장한 갈륨나이트라이드 발광다이오드의 소자 제작 기술이 비약적으로 발전하였다. 하지만 이들 다이오드가 이미 상업적으로 활용되고 있다 할지라도 갈륨나이트라이드 발광다이오드에 있어서 다이오드를 구성하는 물질들과 소형화에 따른 정전기 방전에 의한 피해를 고려해야한다. 정전기방전(ESD)에 의한 피해는 발광소자의 신뢰성에 매우 큰 영향을 주는 파라미터중 하나이다. 본 연구에서는 대량생산 되는 발광다이오드의 생산공정에서 발생하는 정전기방전에 의한 피해와 이에 대한 대책을 논의하였다. 대부분의 ESD 문제는 장비의 적정한 사용과 공정 환경 개선을 통해서 제어되었다.