• 전기화학회지
• /
• 제2권4호
• /
• pp.183-189
• /
• 1999

원자력 시설의 가동 및 유지보수 중에 중$\cdot$저준위 방사성폐기물로 다량 생성되는 폐 유기이온교환수지를 상온의 수용 상 내에서 분해 처리하는 공정을 개발할 목적으로, 전기화학적으로 생성되는 Ag(II)를 매개산화제로 사용하여 양이온 및 음이온교환수지의 분해 연구를 수행하였다. Ag(II) 매개산화 공정에서 제어 가능한 인자인 전류, 온도 및 전해질 농도가 이온교환수지의 분해거동에 미치는 영향을 고찰하였다. 양이온교환수지는 거의 대부분 $CO_2$로 분해되었으며, 전류밀도가 감소할수록 전류효율이 증가됨을 보인 반면에 양극전해질로 사용된 질산의 농도 및 온도가 증가하더라도 분해거동에는 영향을 미치지 않았다. 양이온교환수지와는 달리 음이온교환수지의 분해시에는 온도와 무관하게 약 $10\%$ 정도가 CO로 분해되었고, $CO_2$로의 분해효율은 온도에 의존하는 경향을 보였으며, $60^{\circ}C$ 이상에서 효과적으로 분해가 가능하였다.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.55-63
• /
• 2013

본 연구에서는 전기화학법으로 생성된 염소를 산화제로 이용하여 루테늄의 침출에 대한 연구를 수행하였다. 휘발성 루테늄산화물의 손실을 막기 위해 전 시스템이 밀폐형으로 제작된다. 루테늄의 침출의 최적조건을 조사하기 위해 pH, 온도, 전해 염소 생성시 인가전류 등의 영향을 조사하였다. 염소전해생성 시스템에 산화전류를 인가하여 염소가스를 발생시키고 침출조에 공급하여 루테늄 용해에 필요한 염소화합물을 생성시켰다. 산화제인 염소화합물의 농도가 포화상태에 도달하였을 때 루테늄 분말시료를 장입하고 침출반응을 진행하였다. 일정시간 간격으로 침출액을 채취하면서 루테늄 침출농도를 분석하였다. 본 실험결과 최적조건은 pH 10, 2 A, $40^{\circ}C$로 이 때 침출률은 88% 이다.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.190-196
• /
• 2007

본 연구에서는 전기화학적 처리공정을 이용하여 전극판 종류에 따른 질산성 질소의 농도별 제거효율을 살펴보았고, 여기서 선정된 전극으로 운전조건(pH 변화, 전류밀도, 환원제, 교차전류)을 변화시켜 질산성 질소 제거효율, 에너지소모량에 따른 최적운전조건을 평가하였다. 또한 단일공정에 의한 처리가 아닌 다단계 전기화학적 처리를 통한 질산성 질소 제거 실험을 진행하였다. 100 mg $NO_3^{-}$ -N/L 농도로 실험한 결과에서 동일 전극인 경우 Zn-Zn 전극판, 불용성 산화전극 백금(Pt)인 경우 Pt-Ti 전극에서 높은 질산성 질소 제거효율을 나타내었다. 150 mg $NO_3^{-}$ -N/L에서 Zn-Zn 전극판인 경우 pH 조절없이 전기분해한 결과 70~85%, 불용성 산화전극인 백금(Pt)인 경우 Pt-Ti 전극에서 40~50%의 질산성 질소 제거효율을 나타내었다. 그리고 고농도인 500, 1,000 mg $NO_3^{-}$ -N/L 질산성 질소 제거 실험결과, 농도가 증가할수록 제거효율은 감소하는 경향을 보이지만 에너지 소모량에 대한 질소 제거효율은 증가하였다. 다단계 전기화학적 처리 실험결과, Test 4 조건을 최적의 조건으로 선정하였으며 그 이유는 다음과 같다. 첫 번째, 1단계에서 소모된 Zn 양극의 대부분을 2단계 이후 공정에서 회수하였고, 두 번째, 2단계 이후에서는 불용성 백금을 산화전극으로 사용함으로써 전극 소모 가능성을 줄였으며, 마지막으로 Zn을 환원전극으로 사용함으로써 Zn의 재이용 가능성을 높였다. 따라서, 질소를 함유한 표면처리 폐수 처리에 전기화학적 공정이 적용될 수 있을 것으로 판단된다.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.583-591
• /
• 2008

In this study, two series of CNT/$TiO_2$ electrodes were prepared. The decrease of surface area compared with that of the pristine carbon nanotubes (CNTs) indicated the blocking of micropores on the surface of the CNTs; was further supported by scanning electron microscopy (SEM) and field emission SEM (FE-SEM) observations. The X-ray diffraction (XRD) results showed that the CNT/$TiO_2$ composites contained a mix of anatase and rutile forms of $TiO_2$ particles when the precursor was $TiO_2$ powder, whereas when the precursor was Ti ($OC_4H_7$) (TNB), the composites contained only the typical single and clear anatase $TiO_2$ particles. The energy dispersive X-ray spectroscopy (EDX) spectra showed the presence of C, O and Ti peaks for all samples. It was found that catalytic decomposition of methylene blue (MB) solution could be attributed to synthetic effects between the $TiO_2$ photocatalysis and electro-assisted CNTs network, and that photoelectrocatalytic oxidation increased with an increase of CNT composition. It was also found that the photoelectrocatalytic oxidation efficiency for MB is higher than that of photocatalytic oxidation. Moreover, the CNT/$TiO_2$ composites catalyst prepared by the impregnation method demonstrates higher photoelectrocatalytic activity than the mechanical mixture with the same CNT content.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.423-429
• /
• 2008

This work was carried out to improve the performance of anodic electrocatalysts in direct ethanol fuel cell(DEFC). PtRu and $Pt_5Ru_4M$(M= Ni, Sn, Mo and W) electrocatalysts were prepared by using a $NaBH_4$ reduction method. Alloy crystal structure and particle size of electrocatalysts were characterized by X-ray diffraction(XRD) and transmission electron microscopy(TEM). The XRD analysis of the electrocatalysts revealed that the face-centered cubic(fcc) peaks shifted to slightly higher diffraction angles when third metals were added. Average size of the uniform particles was observed to be approximately $3{\sim}3.5\;nm$ from the TEM image. The electrochemical measurements were carried out in the solution 1M $H_2SO_4$ and 1M $C_2H_5OH$ at room temperature. Cyclic-voltammogram results showed that $Pt_5Ru_4W$ electrocatalyst exhibited much higher current density for ethanol oxidation of $2.73\;mA/cm^2$ than PtRu electrocatalyst of $0.73\;mA/cm^2$.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.38-44
• /
• 2005

Oxidation method was used to extract S-keratose from wool. Wool was treated with performic acid and soluble fraction(S-keratose) was collected by evaporating the solvent. S-keratose and Nylon 6 were dissolved in formic acid at the ratio of 100/0, 80/20, 50/50, 20/80, and 0/100, and S-keratose/Nylon 6 web of sub-micron size was made by electro-spinning technique. SEM, EA, FT-IR, XRD, and TGA were used to characterize the properties of S-keratose/Nylon 6 solutions and electrospun fibers. As the Nylon 6 content increased, viscosity, conductivity of the electrospinning solution and the diameter of spun fiber increased. Electrospun nonwoven webs have the same S-keratose/Nylon 6 ratios of the spinning solutions. The crystalline structures of S-keratose and Nylon 6 existed separately in the electrospun webs. Thermal stability of the webs increased due to Nylon 6 content.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.83-84
• /
• 2006

In aqueous phase, we directly prepared conducting and photoluminescent nano-structured particles by oxidation polymerization. Thiophene(PT) was initiated by $FeCl_{3}/H_{2}O_{2}$ (catalyst/oxidant) combination system. And, polydispersed core-shell poly(styrene/thiophene) and polyaniline(PANI)-coated multi core-shell polystyrene latex particles were successfully prepared by oxidative and radical polymerization. The resulting latex particles have fine improved luminescence and conductive efficiency and dispersion state due to the PT and PANI shell. Hyper functionalized nanoparticle would be expected to increase the processibility in various electrical and electro-optical fields.

• 한국재료학회지
• /
• 제13권9호
• /
• pp.625-630
• /
• 2003

Increasing environmental concerns require to solve the problem produced due to the use of heavy metals in coating formulations. Therefore, it is necessary to develop new coating strategy employing inherently conducting polymers such as Polyaniline(PANI). Polyaniline films were electrosynthesized by oxidation of aniline on cold rolled and weathering sheets using the potentiostatic mode from an aqueous oxalic acid medium. Potentiodynamic polarization curves were obtained for cold rolled and weathering sheets in the aqueous solution of 3% sodium chloride. The structure and properties of polyaniline film were elucidated using SEM, DSC, SST. A high corrosion resistance of polyaniline films were observed with a gain of the corrosion potential around 600-900 mV positive in the substrate covered with polyaniline than in the case without it.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.63-66
• /
• 2006

A long term deactivation study was carried out with commercial MEA provided by Hyundai Motor Co. The deactivation phenomena were observed only at high voltage region where there is no diffusion-limited reaction. A rapid deactivation was observed up to 40h owing to the sintering of Pt particles. This was followed a gradual increase in the activity up to 300 h, which is probably caused by improvement in the electrode properties in the presence of current during the reaction. After 300 h, monotonic decrease in the activity was observed owing to dissolution of Pt particles especially in the cathode. The presence oxygen is the cause of oxidation and dissolution of Pt. The dissolution rate can be somewhat retarded by generation of current, which reduces Pt ion back to Pt in the cathode.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.