• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.271-274
• /
• 1998

In this paper, the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by one side transcription alignment method on PI surface with side chain were investigated. The LC alignment produced by the transcription alignment method is attributable to a memory effect of the NLC on Pl surfaces. We observed that the pretilt angle of NLC is generated about 3.6$^{\circ}$ in a cell with one side transcription alignment on PI surface. Also, the electro-optical(EO) performance of TN-LCD with one side transcription alignment method on PI surface will be discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.18-22
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about $1.7^{\circ}$ lower on the glass substrate than on thin plastic substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.502-505
• /
• 2003

We synthesized high thermal photoalignment material with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms.

• 항공우주기술
• /
• 제4권2호
• /
• pp.107-116
• /
• 2005

고도 685km에서 450mm~900mm 파장대역의 한 채널의 흑백영상과 4채널 칼라영상을 이미징하도록 개발된 MSC는 한반도의 정밀 지상관측 등 국가 영상정보 수요충족을 위해 운용예정인 저궤도용 다목적실용위성 2호의 유일한 탑재체로서 마지막 시험단계에 있다. MSC는 우주공간에서 운용되는 위성체 탑재체의 특성상 우주공간에서 경험하게 되는 직,간접의 태양광선, 그리고 극저온의 우주환경 등을 견뎌내도록 설계요구가 주어지는바 이를 위해서는 온도 제어가 불가피하고 또한 한정된 위성본체의 전원용량의 효율적인 사용도 고려되어서 설계되어야 한다. 특히 광학성능에 직접적인 영향을 미치게 되는 EOS의 효율적인 열제어는 MSC 설계요소의 가장 중요한 부분이기도 하다. 본 논문은 먼저 MSC의 전체적인 시스템구성과 열제어 시스템 개념을 소개한 다음, 실제 열제어를 수행하는 THTM(THermal and TeleMetry) 보드를 중심으로 열제어 시스템의 H/W와 S/W의 수행 내용들을 소개하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.73-77
• /
• 2005

In this study, we investigated response characteristics of liquid crystal display (LCD) with different operating mode of nematic liquid crystals (NLCs) such as 45 $^{circ} twisted nematic (TN), 67.3 $^{circ} TN and electrical controlled birefringence (ECB) on the rubbed polyimide (PI) surface with side chains. The pretilt angles generated on polyimide surfaces of the three kinds of LCD operating modes were about 12 $^{circ} that was higher than those of conventional TN-LCOs. Also, the Electro-optical (EO) performance of these LCOs showed stable condition. Low transmittance of the 45 $^{circ} TN and 67.3 $^{circ} TN cell on the rubbed PI surface were measured by using low cell gap d. The fast response time in ECB cell among the three kinds of LCD operating modes was achieved. Also, thermal ability of fast 90 $^{circ} TN-LCD was investigated. The threshold voltage and the response time of thermal stressed TN-LCOs showed the same performances on no thermal stressed TN-LCOs. There was little change of value in these TN cells. However, the transmittances of TN-LCOs on the rubbed PI surface decreased while increasing thermal stress time. Therefore, the thermal stability of TN-LCD was decreased by the high thermal stress for the long duration.

• 한국통신학회논문지
• /
• 제25권7A호
• /
• pp.951-958
• /
• 2000

파장분할다중화방식 전광통신망에서는 신호가 먼 거리를 진행할 경우, ASE(Amplified Spontaneous Emission) 잡음이나 누화(Crosstalk)와 같은 물리적 제약으로 인해 신호가 손상된다. 소낫ㅇ된 신호를 회복시키기 위해서는 광신호를 중간 노드에서 재생(signal regeneration)해야 하지만, 신호 재생은 추가의 네트워크 자원을 필요로 하기 때문에 재생 노드(Signal Regeneration Node, SRN)는 다른 광경로의 블록킹을 최소화하도록 신중히 선택해야 한다. 이 논문에서는 물리적인 제약 하에서 다중홉 방식으로 광경로를 설정하는 문제에 대해 최소비용 알고리즘(Minimal-Cost Placement Algorithm, MCPA)과 휴리스틱 알고리즘들을 제안하다. 최소비용 위치선정 알고리즘은 다이내믹 프로그래밍을 이용하여 송수신기나 파장의 부족으로 인한 다른 광경로들의 블록킹을 최소화하도록 공식화하였다.

• Journal of Astronomy and Space Sciences
• /
• 제40권1호
• /
• pp.35-44
• /
• 2023

Surveillance and reconnaissance intelligence in the space domain will become increasingly important in future battlefield environments. Moreover, to assimilate the military provocations and trends of hostile countries, imagery intelligence of the highest possible resolution is required. There are many methods for improving the resolution of optical satellites when observing the ground, such as designing satellite optical systems with a larger diameter and lowering the operating altitude. In this paper, we propose a method for improving ground observation resolution by using an optical system for a previously designed low orbit satellite and lowering the operating altitude of the satellite. When the altitude of a satellite is reduced in a circular orbit, a large amount of thrust fuel is required to maintain altitude because the satellite's altitude can decrease rapidly due to atmospheric drag. However, by using the critical inclination, which can fix the position of the perigee in an elliptical orbit to the observation area, the operating altitude of the satellite can be reduced using less fuel compared to a circular orbit. This method makes it possible to obtain a similar observational resolution of a medium-sized satellite with the same weight and volume as a small satellite. In addition, this method has the advantage of reducing development and launch costs to that of a small-sized satellite. As a result, we designed an elliptical orbit. The perigee of the orbit is 300 km, the apogee is 8,366.52 km, and the critical inclination is 116.56°. This orbit remains at its lowest altitude to the Korean peninsula constantly with much less orbit maintenance fuel compared to the 300 km circular orbit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.44-44
• /
• 2008

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, non contact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, Polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposure polyimide surface was observed. The tilt angle of NLC on the PI surface with ion beam exposure can be measured under $1^{\circ}$ for all of irradiation angles. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.43-43
• /
• 2008

Recently, it is widely studied to liquid crystal (LC) alignment using ion-beam exposure. Because conventional rubbing method has some problems such as defects from dust and electrostatic charges and rubbing scratch during rubbing process. Moreover rubbing method needs cleaning process to remove these defects. Therefore rubbing-free techniques like ion-beam method are strongly required. We studied LC alignment by controlling ion-beam irradiation angles and electro-optical (EO) characteristics of twisted nematic LC on the polyimide surface. In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) surface was observed. We also achieved low pretilt angle as function of ion-beam irradiation angles. X-ray photoelectron spectroscopic (XPS) analysis provided chemical evidence for LC alignment by controlling ion-beam irradiation angles. In addition, it can be achieved the good EO properties of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) on PI surface. Some other experiments results and discussion will be included in the presentation.

• 항공우주시스템공학회지
• /
• 제17권4호
• /
• pp.87-94
• /
• 2023

본 논문은 항공기의 성능개량에 필수 수반되는 신규 및 변경 장비 장착부에 기체구조물 개조 및 장착설계를 수행한 연구이다. 항공기 외부에 장착되는 대표적인 성능개량 장비로는 안테나, 레이더, 전자광학/적외선 표적지시장치(EO/IR) 및 자체방어체계 장비 등이 있으며, 운용을 위해서 기본항공기의 구조보강, 개조 및 장착설계가 수행된다. 항공기 내부에는 사용자 운용 요구도에 맞게 콘솔과 랙 구조물이 개조 또는 추가된다. 또한 성능개량을 위해 교체 및 추가되는 장비의 장착설계와 이에 따른 내부 냉각을 위한 환경제어계통 구성품 개조가 수반된다. 성능개량 항공기의 구조건전성, 운용성 및 정비성이 확보된 기체구조물의 상세설계로 감항 적합성이 검증된 엔지니어링 과정과 사례를 제시하였다.