• 산업경영시스템학회지
• /
• 제37권2호
• /
• pp.70-76
• /
• 2014

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.393-397
• /
• 2001

A linear ultrasonic motor was designed by a combination of the first longitudinal and fourth bending mode, the motor consisted of a straight aluminum alloys bar bonded with a piezoelectric ceramics element as a driving element. That is, L$_1$-B$_4$ linear ultrasonic motor can be constructed using a multi-mode vibrator of longitudinal and bending modes. The simulation with variation of material characteristics of piezoceramic were performed as use of finite element analysis ANSYS 5.5, such as elastic compliance, piezoelectric constant, electro-mechanical coupling coefficient, poisson's ratio and density. The results of simulation, elastic compliance constant s$_{11}$ and piezoelectric constant d$_{31}$ had the most of influence on the elliptic-motion. This results consist with using transverse effect of material. The used motor were piezoceramics of 4 layers, and the dimensions were 65$\times$5$\times$3.5mm(LxWxt).).

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.56-64
• /
• 2019

Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.397-404
• /
• 2010

The use of equivalent circuit models of piezoelectric energy harvesters is inevitable when power circuitry including rectifying and smoothing circuit elements is connected to them for evaluating DC electrical outputs. This is because it is difficult to incorporate the electro-mechanical coupling resulting from the additional circuitry into the conventional finite element analysis. Motivated by this observation, we propose a method to accurately extract the equivalent circuit parameters by using commercially available FEM software such as ANSYS which provides three-dimensional AC piezoelectric analysis. Then the equivalent circuit can be analyzed by circuit simulators such as $SimPowerSystems^{TM}$ of MATLAB. While the previous works have estimated the circuit parameters by experimental measurements or by analytical solutions developed only for limited geometries and boundary conditions, the proposed method has no such limitation because piezoelectric energy harvesters of any shapes and boundary conditions can be treated in FEM software. For the verification of the proposed method, multi-modal AC electrical power output by using a corresponding equivalent circuit is compared with that by ANSYS. The proposed method is then shown to be very useful in the subsequent evaluation of DC electrical output which is obtained by attaching a bridge diode and a storage capacitor to a piezoelectric energy harvester.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.39-47
• /
• 2018

Recently, as environmental regulations for earth-moving equipment have been tightening, advanced systems such as electronic control, have been introduced for energy savings. An IMV (Independent Metering Valve) consisting of four 2-way valves, is an electro-hydraulic control systems that provides more flexible controllability, and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully maximize use of an IMV, the bi-directional flow control valve that can regulate a large amount of flow in both directions, should be adopted. The hydraulic circuit of an IMV applied to an excavator from an overseas construction equipment company, reveals the flow control valve with the compound of proportional solenoid valve for first stage, and 2-way spool valve for the second stage. Moreover, the two spools are interconnected by a feedback spring, presumed to compensate for flow force acting on the second stage spool. This paper addresses the static analysis of flow control valve in an IMV to investigate the improvement of robustness, against flow force by the feedback spring. From the steady-state analysis of flow control valve model, it can be concluded that the feedback spring facilitates maintaining linearity of spool displacement for control input, and relatively constant flow for load disturbance.

• 한국항공우주학회지
• /
• 제45권11호
• /
• pp.932-938
• /
• 2017

플라자마의 거동을 오일러리안 격자와 라그랑지안 입자를 혼합하여 해석하는 Particle-in-cell 기법을 적용하여 간략화된 홀추력기를 해석하였다. 본 연구는 중성입자, 이온입자 뿐만 아니라 전자도 라그랑지안 기법으로 개별추적 계산하기 때문에 message passing interface 기법을 이용해 대용량 계산이 가능한 병렬클러스터링을 적용하였다. 계산에 앞서 일정한 벡터의 자기장에서 전자군의 나선형 거동을 해석하였고, 절대해와 일치함을 확인하여 코드를 검증하였다. 실린더 내부에 반경방향으로 일정한 자기장과 축방향으로 일정한 전기장을 고정시켜 플라즈마의 거동을 PIC 모델을 이용하여 해석하였다. 반응 실린더 내부에 전자가 로렌츠 힘에 의해 이중나선을 그리며 구속되는 현상이 잘 포착되었고, 고속 회전하는 전자와 주입된 중성입자가 충돌하여 이온화 되었고, 대전된 입자가 축방향의 전기장에 의해 급 가속하는 현상 또한 잘 모사되어 플라즈마의 플룸 거동을 모사하였다.

• 대한기계학회논문집B
• /
• 제35권4호
• /
• pp.385-390
• /
• 2011

본 연구에서는 미세채널과 나노채널의 교차부에 불균형 동전기성을 이용한 미세혼합기를 개발하였다. 채널 내 용액의 혼합은 인가된 전압에 의한 전기삼투유동과 미세채널과 나노채널 교차 부에서의 불균형 동전기성에 의한 와류현상에 의해 이루어진다. 미세채널은 PDMS 을 이용하여 소프트리소그래피 공정으로 제작하였고, 나노채널은 미세채널의 특정위치에 전기적 충격에 의한 PDMS 의 파괴로 매우 간단하게 제작하였다. 혼합성능을 평가하기 위하여 형광물질인 Rhodamine B 용액을 이용하여 혼합 전과 후의 형광 분포를 분석하였으며, 약 90%의 혼합을 얻을 수 있었다. 본 연구의 미세혼합기는 복잡한 공정을 요구하지 않고 매우 간단하게 제작되었으며, 생화학시료 분석을 위한 미세시스템에 활용될 수 있다.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.805-812
• /
• 2011

손가락형 전극과 압전섬유/에폭시 복합재료(MFC) 압전패치가 분포된 알루미늄 외팔보형의 에너지 회수장치를 설계하여 전기-기계적 특성을 연구하였다. 최대 전력을 얻기 위해서 보와 외부 가진이 공진주파수에서 진동하도록 하였다. ANSYS를 사용하여 해석기법을 개발했으며, 방법의 타당성 검증을 위해서 결과를 실험과 비교하였으며, 두 결과는 잘 일치하였다. 개발된 해석기법을 사용하여 PZT, PVDF, MFC 압전체에 의한 발생전압의 차이를 계산했으며, 압전체의 위치, 보의 치수가 성능에 미치는 영향을 연구하였다. 또한 MFC에 의한 최대 전압발생을 위해서 보의 치수에 대한 최적화가 수행되었으며, 그 결과 최적화된 보에서 1차고유진동수 24.5Hz에서 40.1V의 전압이 발생했으며 이 값은 PZT의 결과와 비슷하다. 그러나 압전섬유형 회수장치는 PZT보다 더 높은 내구수명이 기대되어 유리하다.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.337-353
• /
• 2021

Micro-electro-mechanical systems (MEMS) are widely employed in sensors, biomedical devices, optic sectors, and micro-accelerometers. New reinforcement materials such as carbon nanotubes as well as graphene platelets provide stiffer structures with controllable mechanical specifications by changing the graphene platelet features. This paper deals with buckling analyses of functionally graded graphene platelets micro plates with two piezoelectric layers subjected to external applied voltage. Governing equations are based on Kirchhoff plate theory assumptions beside the modified couple stress theory to incorporate the micro scale influences. A uniform temperature change and external electric field are regarded along the micro plate thickness. Moreover, an external in-plane mechanical load is uniformly distributed along the micro plate edges. The Hamilton's principle is employed to extract the governing equations. The material properties of each composite layer reinforced with graphene platelets of the considered micro plate are evaluated by the Halpin-Tsai micromechanical model. The governing equations are solved by the Navier's approach for the case of simply-supported boundary condition. The effects of the external applied voltage, the material length scale parameter, the thickness of the piezoelectric layers, the side, the length and the weight fraction of the graphene platelets as well as the graphene platelets distribution pattern on the critical buckling temperature change and on the critical buckling in-plane load are investigated. The outcomes illustrate the reduction of the thermal buckling strength independent of the graphene platelets distribution pattern while meanwhile the mechanical buckling strength is promoted. Furthermore, a negative voltage, -50 Volt, strengthens the micro plate stability against the thermal buckling occurrence about 9% while a positive voltage, 50 Volt, decreases the critical buckling load about 9% independent of the graphene platelet distribution pattern.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.25-34
• /
• 2003

본 논문에서는 압전 작동기가 삽입되거나 부착된 구조를 해석하기 위하여, 기존의 기계적 문제만을 고려한 9 절점 가정변형률 쉘 요소의 정식화를 전기-기계연성 문제에도 적용 가능하도록 확장하였다. 본 쉘요소는 잠김현상을 완화할 수 있고, 두께변형을 고려하기 위해 각 절점에서 6개의 자유도를 갖는 특징이 있다. 전기-기계 자유도들은 구성방정식을 이용하여 연계시켰다. 변위장은 요소의 전체 두께방향으로 선형으로 가정하였고, 전기적 포텐셜은 각각의 압전재료층에 대해 선형으로 가정하였다. 확장된 정식화에 기초한 유한요소 프로그램을 개발하였고, 수치예제들을 통해 프로그램을 검증하였다. 개발된 쉘 요소에 의한 결과는 다른 참고문헌들의 결과들과 잘 일치하였다.