• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.362-368
• /
• 2001

To design a limiting MCCB (Molded Case Circuit Breaker) mechanism, a dynamic modeling of the mechanism in which the electro-magnetic force effects are incorporated needs to be developed. Conventionally, electro-magnetic effects were considered separately for the design of the mechanism. In this paper, an electro-magnetic force that is induced by limited current is identified and included in the dynamic modeling of the mechanism. Thus, the electro-magnetic which is defined as a external force and the mechanical effects are simultaneously considered for the design of the mechanism which is composed of contactor, spring , link, latch and so on.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1210-1214
• /
• 2008

Electro-pneumatic servo valve is an electro-mechanical device which converts electric signal into pneumatic flow rate or pressure. In order to improve the overall performance of pneumatic servo systems, electro-pneumatic servo valves are required, which have fast dynamic characteristic, no air leakage at null, and can be fabricated at a low-cost. The first objective of this research is to design and fabricate a new electro-pneumatic servo valve which satisfies the above-mentioned requirements. In this paper, we has been modeled as a system consisting of coupled electro-mechanic and mechanical subsystems. The appropriateness of the model has been verified by simulation. The simulation model resolves the valve body motion and the solenoid current at high accuracy. Also, we are calculate the displacement of spool and computed results show winding currents, magnetic actuator force, flux density line, displacement, velocity, back EMF, eddy current etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.513-514
• /
• 2007

최근 들어, 디지털 보호 계전기의 계측 및 계전 기능 외에 운용 프로그램 및 사고파형 분석 기능 또한 중요시 하고 있는 실정이다. 이를 위해 저장된 사고파형을 분석하기 위한 프로그램 개발이 요구되어 지고 있으며 본 논문에서는 다양한 기능을 가지는 사고파형 분석 프로그램을 소개한다.

• 항공우주시스템공학회지
• /
• 제14권6호
• /
• pp.58-67
• /
• 2020

In this study, finite element fatigue analysis combined with a fatigue correlation factor is proposed to predict the bending fatigue life of a gear in an electro-mechanical aircraft actuator. First, stress-life curves are obtained for the gear material via a round bar fatigue test. Subsequently, stochastic stress-life (P-S-N) curves are derived for 50% and 1% failure probabilities, separately. The curves are applied to the fatigue analysis model of a single gear tooth, and the effect of the fatigue correction factor is analyzed. The analytical P-S-N curves reflecting the fatigue correction factor matched the experimental data. This shows that the analytical fatigue life is reliable and that the analysis technique is effective.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.346-352
• /
• 2007

In this paper, we present an analysis of dynamic characteristics of an electromagnetic actuator for circuit breakers. It is indispensable to simultaneously analyze magnetic, electric, and mechanical phenomena to obtain the dynamic characteristics of the electromagnetic actuator because these phenomena are closely related to each other in an electromagnetic actuator system. The magnetic equations are computed by using the finite element method (FEM). The electric equations and the mechanical equations, which include the time derivative terms, are calculated by using the time difference method (TDM). The calculated results, which have been obtained by means of the FEM and the TDM, are presented with experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.693-694
• /
• 2006

In order to develop a high temperature superconducting(HTS) coil for the fault current limiter(FCL), the over-current characteristics in YBCO coated conductor(CC) with Ni-W alloy substrate are analyzed. The HTS wire is wound by bifilar winding method for resistive current limitation and it is operated in 65K sub-cooled nitrogen. In order to analyze the resistance and the temperature characteristics of the CC wire, an analysis program is developed considering all the composition materials except the buffer layer. Using this program, the temperature rise, the resistance development and the current limitation of CC are calculated depending on the applied voltage and the stabilizer materials. According to the analysis results, under the temperature restriction of 300K, the maximum voltage per meter is determined as 40V/m if the stabilizer is $25{\mu}m$ thick stainless steel at each side. Finally, the wire length needed for the distribution level HTS FCL is estimated.

• 항공우주시스템공학회지
• /
• 제17권4호
• /
• pp.126-132
• /
• 2023

최근 항공분야에서는 온실가스 배출 저감을 위한 친환경 기술이 강조되면서 전기를 주동력원으로 기계적인 직진, 회전 운동을 제어하는 전기식 작동기의 다양한 연구가 진행되고 있다. 본 연구에서는 단일통로 항공기 전륜조향용 전기식 작동기의 피로수명을 평가하였다. 구조해석을 통해 작동기의 취약부위들을 선정하여 이들에 대한 단위하중 응력표를 구축하였고, 각 하중 프로파일에 대한 대표응력을 계산하였다. 또한 낙수계수법으로 대표응력 그룹의 개별 프로파일을 추출하고, 이를 소재의 S-N 선도에 적용하여 개별 프로파일에 대한 손상을 계산하였다. 최종적으로 손상누적법칙으로 취약 부위들에서의 총 손상을 산출하였고, 단일통로 항공기 전륜조향용 전기식 작동기의 취약 부위들에 대한 피로수명을 평가하였다.

• 항공우주시스템공학회지
• /
• 제14권6호
• /
• pp.18-25
• /
• 2020

This study investigated the structural behaviors and safety of an electro-mechanical linear actuator and a load simulator with a plate spring. The material and dimensions of the plate spring were determined by theoretically calculating the stress and torsional angle for the rating load of the actuator. Thereafter, a flexible multibody dynamics (FMBD) analysis was conducted on the linear actuator and load simulator to confirm the performance of the load simulator and acquire the reaction forces acting on the actuator and simulator. The structural safety of the linear actuator and load simulator was evaluated via finite element analysis using the aforementioned reaction forces. Consequently, the proposed linear actuator and load simulator were determined to be structurally safe; however, the safety factors for the actuation rod and the housing on the actuator were excessively high. Therefore, the weight and cost must be reduced to improve their design parameters in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.629-631
• /
• 2001

중저압 분야에서 가장 많이 사용되는 차단기는 진공차단기이다. 진공차단기는 $SF_6$에 비하여 간단하며, 아크소호 능력 또한 뛰어나다. 이런 진공차단기에서 차단성능에 가장 중요한 부분이 진공차단부이다. 본 논문에서는 constricted arc와 diffuse arc에 관하여 서술하였으며, contrate type 진공차단부의 다양한 형상변경에 따른 직교자계와 축자계에 대한 3차원 전자계 해석을 수행하였다. 3차원 전자계해석으로 얻어진 결과는 새로운 진공차단부 개발에 커다란 도움이 될 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.507-509
• /
• 2005

This paper introduce about development of effective alarm system to apply to power system. This system includes index-components that display alarm information. It was changed color or position, value, etc by operator's tuning. According to use this system, User can not only perform easily a series of alarm analysis, but also can deal with custom system for only user.