• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.316-322
• /
• 2007

정유압 방식 EHA는 종래의 밸브 제어 방식 전기유압 구동장치와 전혀 다른 특성을 나타낸다. 본 논문에서는 EHA의 비선형 요소를 포함한 수학적 모델을 유도하고 실험적으로 검증하였다. 이 수학적 모델을 근거로 전기 모터로 구동되는 유압 펌프, 파이프 배관 그리고 유압 실린더로 구성되는 EHA의 시물레이션 모델을 개발하여 주요 설계 인자인 모터 토크의 피크치, 펌프의 관성 모멘트 등이 제어 성능에 미치는 영향을 분석하였다. 여기에서 실험 조건은 의도적으로 과도기에서 모터 토크가 포화되도록 선정하였다. 그 결과로서 최대 속도로 동작하는 EHA의 제어 정밀도를 개선하기 위한 설계 조건을 조사하였다.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.86-94
• /
• 2011

In this paper, an electro hydraulic power steering system based on electro hydrostatic actuator (EHA) is proposed. A detailed steering model for the proposed electro hydraulic power steering system including mechanical and hydraulic subsystems is established. A conventional electro hydraulic power steering system is also modeled to evaluate the performance of the proposed power steering system such as responsiveness, assist force, command tracking and steering feel by computer simulation. From the computer simulation results, it is found that the proposed power steering system based on EHA has desirable performance.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.1-7
• /
• 2014

This paper presents the development of a compact position generator to be used for industrial purposes based on a pump controlled Electro-Hydraulic Actuator (EHA), which is closed-loop controlled by an embedded based Iterative PID controller. The controller is designed by combining the PID controller and the iterative learning scheme to perform tracking control for periodically desired references. Control algorithm is implemented on an embedded computer (AD 7011-EVA) which makes the implementation and application in industrial environments easier.

• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.84-92
• /
• 2022

전기-정유압식 작동기(EHA)는 독립적으로 유동력원을 운용함에 따라, 복잡한 유압 배관을 제거할 수 있어 누유 및 중량 최소화, 안전성 향상의 장점이 있어 최근 항공기용 비행제어 분야에서 사용되고 있다. 이러한 EHA를 탑재하는 항공기의 경우, 기존 중앙 유압시스템을 탑재한 항공기에 비해 제한된 냉각원에 따른 EHA의 열관리 이슈가 대두된다. 이러한 열관리 이슈의 해결을 위해서는, EHA의 열특성을 예측할 수 있는 열해석 모델이 필요하다. 본 연구에서는 유압펌프 및 전기모터로 구성되는 EHA 유압동력모듈의 내부 회전체를 고압 하에서 고속으로 회전이 가능하도록, 유압동력모듈 내부에 유체 순환 회로를 적용하였다. 적합한 열해석 모델을 구축하고, 유냉식 또는 비유냉식 유압동력모듈 적용에 따른 해석 결과의 비교 및 검토를 통해 EHA의 열특성 영향성을 확인하고자 하였다.

• 동력기계공학회지
• /
• 제15권2호
• /
• pp.69-77
• /
• 2011

In this paper, an optimal PID sliding mode controller is proposed for the position control of electro-hydrostatic actuator(ERA) systems with system uncertainties and saturation in the motor. An ERA prototype is developed and system modeling and parameter identification are executed. Then, optimal PID and optimal anti-windup PID controller are designed based on identified system model by using optimization toolbox in MA TLAB/Simulink and the performance of the two control systems are compared by experiment. It was found that the optimal anti-windup PID control system has better performance than the optimal anti-windup PID control system.

• 로봇학회논문지
• /
• 제11권2호
• /
• pp.92-99
• /
• 2016

An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.

• 드라이브 ㆍ 컨트롤
• /
• 제9권3호
• /
• pp.16-22
• /
• 2012

Nowadays, electro hydrostatic actuator (EHA) has shown great advantages over the conventional hydraulic actuators with valve control system. This paper presents a position control for an EHA using a modified back stepping controller. The controller is designed by combining a backstepping technique and adaptation laws via special Lyapunov functions. The control signal consists of an adaptive control signal to compensate for the nonlinearities and a simple robust structure to deal with a bounded disturbance. Experiments are carried out to investigate the effectiveness of the proposed controller.

• 드라이브 ㆍ 컨트롤
• /
• 제13권3호
• /
• pp.32-38
• /
• 2016

For this paper, the position-control performances of dual EHA(electro-hydrostatic actuator) systems were investigated according to two cases wherein the double-rod- and single-rod-type hydraulic cylinders were combined. Since the control performance is significantly dependent on the load conditions including external forces such as the inertia load, it is proposed here that the two sub-EHAs are driven by separate position and force controllers, instead of two identical position controllers. According to the simulation results, the best performance was achieved by the position-controlled single-rod-type EHA that was combined with a force-controlled double-rod-type EHA. As the force-controlled double-rod-type EHA compensated for the external loads on the position-controlled single-rod-type EHA, the position-control performance was not influenced by external forces including the inertia load. In addition, the position-controlled single-rod-type EHA contributed to the enhancement of the damping ratio by absorbing the pressure peaks through its internal accumulator. Due to the symmetrical piston areas, the double-rod-type EHA is more suitable for force control than the single-rod- type EHA.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.55-60
• /
• 2018

Force-controlled electro-hydrostatic actuators have to exhibit high backdrivability, to quickly compensate for force control errors caused by externally disturbed rod movement. To obtain high backdrivability, the servomotor for driving the hydraulic pump, should rotate exactly to such a revolution to compensate for force control errors, compressing or decompressing cylinder chambers. In this study, we proposed a modified velocity control structure, including a robust internal-loop compensator (RIC)-based velocity controller, for the servomotor to improve backdrivability of a force-controlled EHA. Performance improvement was confirmed experimentally, wherein sinusoidal velocity disturbance was applied to the force-controlled EHA, with constant reference input. Its dynamic force control errors reduced effectively, with the proposed control scheme, compared to test results with a conventional motordriver, for motor velocity control.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.291-298
• /
• 2013

본 논문에서는 압력보상형 사판식 유압 피스톤 펌프와 밸브 제어형 실린더를 결합한 EHA에 대하여 유압 실린더의 소비 유량이 작으면 펌프 회전 속도를 낮추는 새로운 개념의 하이브리드형 제어 시스템을 제안하였다. 펌프 내 압력조절기의 사판각 제어와 간섭을 피하기 위해 위치 명령 신호의 속도 성분 평균치를 이용하여 펌프의 회전속도를 조절하였고, 시스템 압력이 기준치 이하로 낮아지는 것을 방지하기 위해 압력 스위치 기능을 추가하였다. 시뮬레이션과 실험 결과에 의하면, EHA의 동적인 응답 특성에 영향을 주지 않는 조건에서 하이브리드 제어를 통해 공전 모드에서의 펌프 회전속도를 1,800rpm에서 600rpm로 낮춤으로써 하이브리드 제어를 안 할 경우에 비해 펌프 구동 동력을 약 44%까지 절감시킬 수 있음을 확인하였다.