• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.46-48
• /
• 2009

This paper aims to investigate generation conditions necessary for the most efficient generation by measuring electricity power under various irradiation conditions, since the photovoltaic generation system has high costs and low efficiency. In addition, because the irradiation varies hourly, daily, monthly, and yearly, the research on the irradiation necessary for photovoltaic generation was carried out by analyzing the pattern o( Bower under various irradiation conditions. Also, after measuring the daily variations of irradiation and generation power, the monthly accumulated irradiation and monthly accumulate power which had the most generation power were investigated and the pattern of the annual generation power was analyzed. The results of this study are as follows. As for the relationship between the photovoltaic generation system and the irradiation, the generation power increased with the irradiation and when the irradiation was more than 600 $[W/m^2]$ the generation power amounted to more than 100 [Wh] as the resonable result.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.203-203
• /
• 2010

Small hydropower is one of the many types of new and renewable energy, which South Korea is planning to develop, as the country is abundant in endowed resources. In order to fully utilize small hydropower resources, there is a need for greater precision in quantifying small hydropower resources and establish an environment in which energy sources can be discovered using the small hydropower geographic information system. This study has given greater precision to calculating annual electricity generation and installed capacity of small hydropower plants of 117 medium basins by inquiring into average annual rainfall, basin area and runoff coefficient, which is anticipated to promote small hydropower resources utilization. Small hydropower geographic information system was also established by additionally providing base information on quantified small hydropower resources and analysis function and small hydropower generator status, rivers, basin, rainfall gauging station, water level gauging station etc.. Established system of GIS small hydropower energy can be used gather basic information for positive applications of small hydropower energy nationwide.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.609-617
• /
• 2005

본 연구는 신재생전원설비가 추가적으로 전력공급설비로서의 역할을 키워감에 따라 나타날 수 있는 공급 상의 문제를 신재생에너지원별로 확률적인 분석을 시도하였다. 각 원별 패턴은 풍속, 일사량, 그리고 월력에 근거한 조수간만의 차이 등에 의해 영향을 받으며 이들은 확률적 분포를 갖는다는 점에 주목하여 피크공급에 대한 각 원별 기여도에 대한 확률적 분석을 시도하였다. 분석의 결과, 저자는 통상적인 전력수급계획에서 각 에너지원별 혹 발전원별 설비이용률을 갖고 설비계획에 반영하는 기존의 방법론이 갖는 문제점을 지적한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.935-945
• /
• 2014

This paper presents a new road generative system that employs a pad of preventive overspeed or tollgate. The system consists of pad, shaft, torsional damper, oneway-clutch, gear system, and electricity generator components. When the car driven through the road generation system, it occurred to surplus energy in the DC power. In order to maximize the power of electricity energy harvester, the simulation software is developed. It is used to determine parametric dimension for optimal design with the theoretically calculated results from the simulation software. The transient responses at the conditions of low and high vehicle speed are compared with the calculated results as torque, impact force, power, out energy etc. Consequently, before design a road generation system, the analysis of simulation results shows that the proposed concept and system has efficiency and confidence.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.18-19
• /
• 2006

The recent interest in distributed generation (DG) due to the opening of the electricity market and the need for alternatives to conventional fossil fuel-based electricity generation has created renewed interest in grid-connected photovoltaic(PV) systems. Many studies are being performed at the power system level to examine the impacts of grid-connected PV systems and several models for PV arrays have been proposed in the literature. However, the complexity of these models and difficulties of implementing them in various software programs can be deterrents to their use. This paper proposes a robust and flexible PV device model suitable for dynamic and transient studies where the PV array's non-linear DC characteristics are important. The model's implementation in software is straightforward and it can even be constructed using standard software library components, as demonstrated using PSCAD/EMTDC.

• Bulletin of the Korea Photovoltaic Society
• /
• v.3 no.3
• /
• pp.45-55
• /
• 2017

Large Scale Solar (LSS) is one of the initiatives announced by the Government of Malaysia in order to increase the share of renewable energy in electricity generation. It is widely known that the energy sector is the major contributor to the Greenhouse Gas (GHG) emissions (or carbon emissions) for many countries including Malaysia. It was recorded that the energy has contributed as much as 218.9 MtCO2eq in 2011, an increase of 31% since 2000. Therefore, this article will discuss the current situation of electricity generation by renewable energy in Malaysia, the expected outcomes of LSS implementation, and showcase the LSS project by Tadau Energy Sdn. Bhd. in Kudat.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.73-79
• /
• 2006

The integration of PV modules into building facades or roof could raise PV module temperature that results in the reduction of electrical power generation. Lowering operating temperature of PV module is important in this respect, and PV module temperature should be considered more accurately, for building-integrated PV(BIPV) systems in predicting their performance. This paper describes a BIPV solar roof design and verifies its performance through experiment In relation to the effect of ventilation in space between PV module and roof surface. The results showed that the ventilation in the space had a positive effect in lowering the module temperature of the BIPV solar roof that enhanced the performance of its electricity generation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.11
• /
• pp.668-674
• /
• 2003

The electric marketplace is in the midst of major changes designed to promote competition. No longer vertically integrated with guaranteed customers and suppliers, electric generators and distributors will have to compete to sell and buy electricity. Unit commitment (UC) in such a competitive environment is not the same as the traditional one anymore. The objective of UC is not to minimize production cost as before but to find the solution that produces a maximum profit for a generation firm. This paper presents a hi-level formulation that decomposes the UC game into a generation-decision game (first level game) and a state(on/off)-decision game (second level game). Derivation that the first-level game has a pure Cournot Nash equilibrium(NE) helps to solve the second-level game. In case of having a mixed NE in the second-level game, this paper chooses a pure strategy having maximum probability in the mixed strategy in order to obviate the probabilistic on/off state which may be infeasible. Simulation results shows that proposed method gives the adequate UC solutions corresponding to a NE.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.812-813
• /
• 2007

The procurement of generation and transmission/Distribution capacity in vertically-integrated electric industry is sufficient by facility construction in suitable time. However, the introduction of competitive electricity market increase the efficiency of availability for facilities and fuels. As a result, long-term capacity procurement is required for stable demand-supply balance since it is expected to maintain their generation capacity at a minimum for profit maximization. In this paper, a new long-term capacity procurement mechanism is constructed, which is able to assure supplemental contribution in competitive electricity market.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.170-171
• /
• 2022

In recent years, due to the occurrence of traffic accidents caused by black ice in winter, the number of personal injuries is increasing rapidly. Black ice is a phenomenon that occurs like a thin layer of ice on the road surface. Accordingly, many developments of heat-generating concrete are being developed to remove ice by increasing the temperature by supplying constant electricity to places where black ice is likely to occur. These heating elements are being developed by mixing a conductive material represented by carbon nanotubes with concrete. However, research up to now has been focused on efficient temperature rise and derivation of the optimum mixing ratio, and the evaluation of maintaining heat generation performance during continuous repetition is insufficient. Therefore, in this study, a heating test specimen was manufactured and 50V power was repeatedly supplied to evaluate the heating characteristics.