• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.463-469
• /
• 2023

Aluminum alloys, known for their high strength-to-weight ratios and impressive electrical and thermal conductivities, are extensively used in numerous engineering sectors, such as aerospace, automotive, and construction. Recently, significant efforts have been made to develop novel aluminum alloys specifically tailored for additive manufacturing. These new alloys aim to provide an optimal balance between mechanical properties and thermal/electrical conductivities. In this study, nine combinatorial samples with various alloy compositions were fabricated using direct energy deposition (DED) additive manufacturing by adjusting the feeding speeds of Al6061 alloy and Al-12Si alloy powders. The effects of the alloying elements on the microstructure, electrical conductivity, and hardness were investigated. Generally, as the Si and Cu contents decreased, electrical conductivity increased and hardness decreased, exhibiting trade-off characteristics. However, electrical conductivity and hardness showed an optimal combination when the Si content was adjusted to below 4.5 wt%, which can sufficiently suppress the grain boundary segregation of the α-Si precipitates, and the Cu content was controlled to induce the formation of Al₂Cu precipitates.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.5
• /
• pp.333-346
• /
• 1997

Plasma spray processes for functional coatings of tubular SOFC ( Soild oxide Fuel Cell).consisting of air electrode, oxide electrolyte, an fuel electrode, are optimized by fully saturated fractional factorial testing. Material and electric characteristics of each coating are analtsed by the implementation of SEM and optical microscope for evaluating microstructure and porosity, X-ray diffraction method for investigating compositional change between raw powder and sprayed coating, and Van der Pauw method for measuring electrical conductivity. LSM ($La_{0.65}Sr_{0.35}MnO_3$air electrode and Ni-YSL fuel electrode coatings have porosities of around 23~30% sufficient for effective fuel and oxidant gas supply to electrochemical reaction interfaces and electrical conductivities of around 90 S/cm and 1000 S/cm, respectively, enough for acting as current collecting electrodes. YSZ($ZrO_2-8mol%Y_2O_3$) electrolyte film has a high ionic conductivities of 0.05~0.07 S/cm at $1000^{\circ}C$ in air atmosphere, but appears to be somewhat too porous to reduce the thickness. for enhancing the cell efficiency. A unit tubular SOFC has beem fabricated by the optimized plasma spray processes for each functional coating and the cell. Its electrochemical chracteristics are investigated by measuring voltage-current and power density with variation of operationg temperature, radio of fuel to air gas flowrates, and total gas flowrate of reactants.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.271-279
• /
• 2000

5 m/o Yb-doped SrCeO3 proton conductor was prepared by a solid state reaction method and its total electriccal conductivity measured as a function of both oxygen partial pressure and water vapor partial pressure in the temperature range of 500~100$0^{\circ}C$. From the total conductivity have been deconvoluted the partial conductivities of oxide ions, protons, and holes, respectively, on the basis of the defect model proposed. The equilibrium constant of hydrogen-dissolution reaction, proton concentration, and mobilities of oxygen vacancies and protons have subsequently been evaluated. It is verified that SrCe1-xYbxO3 is a mixed conductor of holes, protons and oxide ions and the proton conduction prevails as temperature decreases and water vapor pressure increases. The heat of water dissolution takes a representative value of $\Delta$HoH=-(140$\pm$20) kJ/mol-H2O, but tends to be less negative with increasing temperature. Migration enthalpies of proton and oxygen vacancy are extracted as 0.83$\pm$0.10 eV and 0.81$\pm$0.01 eV, respectively.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2007

A general method to formulate the tissue-equivalent liquids for SAR measurement is proposed to make sucrose-free brain tissue applicable at 835 MHz as an example We suggest the tissue composition can be determined by measuring the dielectric constants and conductivities with the DI water and salt addition variation to the pre-manufactured auxiliary liquid of DGBE and TritonX-100 The manufactured liquid satisfies the specified electrical parameters of international standard at 835 MHz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.258-263
• /
• 2000

Effect of microwave heat-treatment processing on the electrical conductivity and crystallization behavior for the $Li_2O-2SiO_2$-xCuO glasses with various CuO contents was compared with that of conventional heat-treatment processing. The electrical conductivities of samples heat-treated at $500^{\circ}C$ by different heat-treatment processing were increased with increasing CuO content and higher electrical conductivities were obtained from microwave heat-treated samples. From the result of XRD analyses, microwave heat-treatment processing enhanced the degree of crystallization in the formation of $Li_2Si_2O_5, Li_2Cu_5$($Si_2O_7)_2$, and $Li_2Cu_2O_3$ crystalline phases. The electrical conductivities of $Li_2O-2SiO_2$-1.3CuO (30 mol% CuO) glass heat-treated at $500^{\circ}C$ for 30 min under conventional and microwave heat-treatment processing were $0.11{\times}10^{-4}(\Omega \textrm {cm})^{-1}$ and $0.68{\times}10^{-4}(\Omega \textrm {cm})^{-1}$ at room temperature, respectively. It was speculated that microwave energy enhanced the degree of crystallization and increased electrical conductivity in the samples.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.775-782
• /
• 2003

In the study, the total conductivies in [(Ce $O_2$)$_{1-x}$ (Zr $O_2$)$_{x}$]$_{0.8}$(Sm $O_{1.5}$)$_{0.2}$ (x- 0, 0.05, 0.1, 0.2) solid solution were measured as a function of temperature and oxygen partial pressure between 80$0^{\circ}C$ and 1,00$0^{\circ}C$ using 4-probe d.c method. Under pure oxygen atmospere, the oxygen ionic conductivity of [(Ce $O_2$)$_{1-x}$ (Zr $O_2$)$_{x}$]$_{0.8}$(Sm $O_{1.5}$)$_{0.2}$ decreased with the concentration of Zr $O_2$At high oxygen partial pressure, the electrical conductivity is almost independent of oxygen partial pressure and decreased with the increase in Zr content. However, the electrical conductivity increase with decreasing oxygen partial pressure and is almost independent of Zr content at low oxygen partial pressure. Empirically, Total conductivity( $\sigma$ ) was expressed by the p$o_{2}$ -independent conductivity as $\sigma$$_{i}$, and the $p_{-1/4}$ $o_{2}$sup -dependent part as $\sigma$$_{e}$. Total, ionic and electronic conductivities fitted by data enabled to determine the transference number. The ionic transference number( $t_{i}$ ) decreased while the electronic transference( $t_{e}$ ) increase with the increase in Zr content and p$o_{2}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.21-32
• /
• 1994

$CaF_2$ crystals were grown with various growth rates by Bridgman method, and the electrical properties of these were studied to examine the changes of ionic conductivities with growth rates by AC Impedance Analyzer. As the growth rates were higher, $CaF_2$ crystals were grown to polycrystals from single crystal. And as grain boundaries and various defects were altered, the ionic conductivities were changed dramatically. $YF_3$ added to $CaF_2$ for disorderizing $CaF_2$ structure and improving the number of $F^-$ carriers and vacancies in $CaF_2$ crystals. Then $Ca_{1-x}Y_XF_{2+X}$ crystals were gained. And the ionic conductivities of $Ca_{1-x}Y_XF_{2+X}$ crystals were investigated with $YF_3$ addition. The ionic conductivities of $CaF_2$ and $Ca_{1-x}Y_XF_{2+X}$ crystals with temperatures were compared. In addition, the effects of clusterings and defects on the electrical properties of solid electrolytes were researched.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.134-140
• /
• 2003

Stretchable Polypyrrole films(Ppy-DBSA, Ppy-mixed dopants) using functionalized doping agents dodecyl-benzensulfonic acid (DBSA) and mixed dopants{DBSA with $LIClO_4$, NSA (2-naphthalenesulfonic acid), DEHSA [di(2-ethylhexyl)sulfosuccinic acid]}, were synthesized by electrochemical method. Electrochemically prepared Polypyrrole films were stretch-oriented $(L/L_0=1.0-2.5)$ by a Bone drawing method and their electrical conductivities were measured. As the drawing ratio was increased, the electrical conductivities were increased. This results might be due to the increase in crystallinity through the incresase in draw ratio. The results of temperature dependence of electrical conductivity showed that power raw $(L/L_0=1.0-2.5)$ gave the best fit to the data for stretched Ppy-DBSA and Ppy-mixed dopants films.

• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.414-419
• /
• 2007

We report the electrical conductivity of the mixed alkali silicate glasses in the system (60-x)$SiO_2-40Na_2O-xCaO(x=0\sim15wt%)$ in the temperature range from $150^{\circ}C$ to $620^{\circ}C$. In the range from $150^{\circ}C$ to glass transition temperature$(T_g)$, the electrical conductivities of glass samples had a tendency to be proportion with temperature. The glasses of containing over 7.5wt% CaO showed lower conductivities than the glasses of containing 0 and 5wt% CaO because two kinds of alkali ions$(Na^+,\;Ca^{2+})$ were obstructed each other. On the other hand, in the range from $T_g$ to $620^{\circ}C$, the electrical conductivity of glasses($7.5{\leq}x{\leq}12.5$) was unstable and decreased in some region. From XRD results, the $Na_4Ca(SiO_3)_3$ phase were observed in these glasses. This means the alkali ions didn't behave as carrier, it seems that this caused the conductivities decrease. In case of glass of containing 15wt% CaO, any crystal phase were not observed. This means the alkali ions behaved as carrier, it consequently seems the conductivity increased.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.27-40
• /
• 2011

Geopolymer concrete is finding a growing number of niche applications in the field of civil engineering due to its high compressive strength and strength gain rate, retainage of structural properties in elevated temperature environments, chemical stability in highly acidic conditions and environmental benefits. Combining the above mentioned characteristics with induced electrical conductivity, could enable geopolymer cement to serve as a smart and sustainable cementitious material suitable for health monitoring of civil structures. Carbon fibers were added to fresh geopolymer and OPC (ordinary Portland cement) mixes to enhance their electrical conductivities. AC-impedance spectroscopy analysis was performed on the specimens with fiber fraction ranging from 0.008 to 0.8 with respect to the weight of cementitious binder, to measure their electrical resistivity values and to determine the maximum beneficial fiber content required to attain electrical percolation. Experimental observations suggest that CFR-geopolymer cement exhibits superior performance to CFR-OPC in terms of conducting electrical current.