• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.80-85
• /
• 2008

Images are often corrupted by noises during signal acquisition and transmission. Among those noises, additive white Gaussian noise (AWGN) and impulse noise are most representative. For different types of noise have different characters, how to remove them separately from degraded image is one of the most fundamental problems. Thus, a modified image restoration algorithm is proposed in this paper, which can not only remove impulse noise of random values, but also remove the AWGN selectively. The noise detection step is by calculating the intensity difference and the spatial distance between pixels in a mask. To divide two different noises, the method is based on three weighted parameters. And the weighted parameters in the filtering mask depend on spatial distances, positions of impulse noise and standard deviation of AWGN. We also use the peak signal-to-noise ratio (PSNR) to evaluate restoration performance, and simulation results demonstrate that the proposed method performs better than conventional median-type filters, in preserving edge details.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.322-325
• /
• 2002

In this study, noise figures of 0.3 $\mu\textrm{m}$-GaAs MESFETs are predicted experimentally with different temperatures. Both the noise figure and the gate leakage current are obtained with wide range of temperatures(27$^{\circ}C$∼300$^{\circ}C$). From the results, gate leakage current increases with temperatures. It is expected that gate leakage current contributes directly to the increase of shot noise current. It is therefore highly recommended to apply an accurate noise analysis to the design of the devices and modules at high temperatures. Fini,Uy the relation between the gate currents resulting in the increase of noise and the noise figures of submicron GaAs MESFETs are traced with different temperatures

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• 제52권3호
• /
• pp.173-180
• /
• 2003

The modified Wiener filtering method is proposed for effective noise suppression in edge region of images corrupted by additive white gaussian noise. Although the pixels classified as a edge region in the conventional Wiener filter have lots of noise components, the conventional Wiener filler cannot remove noise effectively due to the preserving of edges. To reduce noise well in edge region, we modify filter coefficients of the conventional Wiener filter The modified filter coefficients increase in noise suppression effect In edge region, while they preserve edges for strong edge region. From simulation $(256{\time}256$ size, 256 graylevel images) filtered images by the proposed method show much improved subjective image quality with some improved peak signal-to-noise ratio compared to those by the conventional Wiener filtering.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• 제53권2호
• /
• pp.118-126
• /
• 2004

The modified Wiener filtering method is proposed for effective noise suppression in edge region of images corrupted by additive white gaussian noise. Although the pixels classified as a edge region in the conventional Wiener filter have lots of noise components, the conventional Wiener filter cannot remove noise effectively due to the preserving of edges. To reduce noise well in edge region, we modify filter coefficients of the conventional Wiener filter. The modified filter coefficients increase in noise suppression effect in edge region, while they preserve edges for strong edge region. From simulation (256${\times}$256 size, 256 graylevel images) filtered images by the proposed method show much improved subjective image quality with higher peak signal-to-noise ratio compared to those by the conventional Wiener filtering.

• Proceedings of the KOSOMBE Conference
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.550-554
• /
• 1997

Acoustic or sound noise due to gradient pulsing has been one of the problems in MRI, both in patient scanning as well as in many areas of psychiatric and neuroscience research, such as unctional MRI (fMRI). Our recent observations in MRI or the visual and motor cortex show very different results with sound noise in comparison with the results obtained without sound noise. Although a number of ideas has been suggested in the literature about the possible elimination or reduction of sound noise, progress has been slow due to the basic role of gradient pulsing in MR imaging. Therefore, we report on some typical behavior of sound noise observed from MRI scanners and the analyses of their characteristics. Data are obtained both from a commercial MRI scanner (GE Signa 1.5-T EPI system).

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1599-1600
• /
• 2006

In this paper, a small size, $7{\times}6\;mm^2$, Low Noise Amplifier(LNA) using LTCC process was fabricated with multi-layer structure for 2.4GHz wireless LAN. The measured results demonstrate that the bandwidth is 130 MHz, and the operating frequency is from 2.39GHz to 2.52GHz. The power gain is above 7.3 dB in the operating frequency range and the gain flatness is 0.5 dB. The maximum S11 is -4 dB and the maximum S22 is -7.5 dB. The noise figure is less than 1.83 dB. The measured power gain, S11 and S22 were had poorer performance than the simulation results. The reason for this discrepancy is that the input and output matching was not performed exactly. However, the noise figure of the LTCC low noise amplifier is better than simulation result. It is found that it is possible to fabricate a LTCC low noise amplifier in a small size.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제64권3호
• /
• pp.169-174
• /
• 2015

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The active noise control (ANC) systems based on the filtered-X least mean square(FxLMS) algorithm have a problem with compensating the acoustic feedback of secondary route. However, newly proposed correlation-LMS(CLMS) and expanded CLMS algorithms have slightly much calculation and are minutely behind performance, these have a advantage not in measuring transfer function onerously so that we can easily adapt these in real time. The CLMS and expanded CLMS algorithm was developed to improve the real-time implementation performance under the variable input noise such as road noise environment. In this paper, we compared and analyzed their performance. From the results of the Matlab simulation for an ANC system, it is shown that expanded CLMS algorithms are more convergence speed and keep the desirable performance even in the input of road noise situation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• 제49권1호
• /
• pp.1-8
• /
• 2000

Switched reluctance motor(SRM) has simple magnetic structure, and requires simple power electronic driving circuit. It is very useful for wide range adjustable speed drive system. But, SRM drive generates large vibration and acoustic noise because it is commutated individually by step pulse m.m.f of each phase pole. In the vibration and acoustic noise characteristics. The considerable vibration and noise is induced by radial deforming of stator, so the frequency of dominant vibration and noise is coincident with the frequency of natural mode frequency of mechanical structure. This radial vibration force is generated in the phase commutation region. This paper suggests the new electromagnetic structure of SRM with auxiliary commutation winding which is excited by direct current. This phase and commutation winding are coupled magnetically between one phase winding and the other. Therefore, the switch-off phase current is absorbed by the another phase winding. By this interaction of phase and commutation winding in commutation mechanism, vibration and noise is reduced. And this reduction effect is examined by the test of prototype machine. As a result, SRM with DC exciting commutation winding is very useful to reduce vibration and acoustic noise.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.278-287
• /
• 2019

In this study, a zero-crossing spike current issue in a totem-pole bridgeless power factor correction (PFC) converter is comprehensively investigated for the first time. Spike current occurs when input voltage crosses zero, becomes a noise source, and causes severe common mode emission issues. A generation mechanism for electromagnetic interference (EMI) is presented to investigate the EMI problem caused by zero-crossing issue, and a noise spectrum due to this issue is predicted by a theoretical analysis based on the Fourier coefficient of an approximate spike current waveform. Furthermore, a noise reduction method is proposed and then improved to reduce the spike current. Experimental measurements are implemented on a GaN-based totem-pole bridgeless PFC converter, and the spike current can be effectively suppressed through the proposed method. Furthermore, the noise spectrums measured without and with the reduced zero-crossing spike current are compared. Experimental results validate the analysis of the noise spectrum caused by the zero-crossing spike current issue.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.175-179
• /
• 2001

The switched reluctance drive exhibits higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial force when phase current is extinguished by commutation action. A new excitation strategy for a Switched Reluctance Motor with Auxiliary Winding (SRMAW) is described and tested. This scheme has auxiliary winding with one diode which is sound to all th poles in one winding. In this scheme, auxiliary winding is used to reduce magnetic stress during commutations. The abrupt change of a phase excitation produces mechanical stresses and it results in vibration and noise. The acoustic noise is reduced remarkably through 2-stage commutation. The operational principle and a characteristic comparison to that of the conventional SRM show that this scheme has some advantages including noise reduction as well as high efficiency drive.