• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.258-260
• /
• 2007

Nowadays the automotive circuit design becomes more complicated a practical modern car circuit usually contains thousands of wires. So the error connection between connector and pins becomes more difficult to be located. This paper proposes a general way to locate all error wires in an automotive circuit design. Firstly, we give an exact definition of error wire to guide our job. This definition also composes the core part of our algorithm. Then we limit the area of the error wires by several steps. During these steps, we apply breadth-first search method to step over all wires under consideration of reducing time cost. In addition, we apply bidirectional stack technique to organize the data structure for algorithm optimization. This algorithm can get a result with all error wires and doubtful wires in a very efficient way. The analysis of this algorithm shows that the complexity is linear. We also discuss some possible improvement of this algorithm.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2008

In this paper, a biconical type antenna is proposed for EMI test site validation above 1 GHz. To achieve broadband and omni-directional radiation patterns required by international standard(CISPR), the proposed antenna consists of general bicones with cylindrical loads and adopts side feeding method to minimize the influence on H-plane pattern due to feeding cable, balun, and connector. The radiation patterns of the fabricated antenna are measured and the results are compared with CISPR criteria and commercial antenna in our interest frequencies. Although the proposed antenna has a few problems in frequency range of 1 GHz to 2 GHz, it has relatively better performance than commercial antenna.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.234-235
• /
• 2002

최근 전력 및 산업기기의 전기량. 물리량 등을 측정하기 위한 광계측 시스템에 사용되는 광커넥터는 산업 현장의 환경적인 제약 조건을 만족할 수 있는 새로운 구조의 다심 광커넥터가 요구되고 있다. 본 논문에서는 이러한 것을 배경으로 하여 전력설비의 절연 내력 등을 향상시킬 목적으로 기기 내부에 충전한 가스 및 절연유 등의 누설을 방지하고. 낮은 손실로 광계측 신호들을 동시에 전달 및 단락시킬 수 있는 광전압 전류 계측용 멀티채널 광커넥터를 제안하고, 시제품의 제작 및 특성시험의 결과에 대해서 기술하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.245-249
• /
• 2009

According to the increase of intelligent vehicles many automotive electric components are installed. The wire harness which connects those also increases. The crimping process for compressing the copper wire bundle into the terminal is a key process to assure the good quality of wire harness. For the case of inadequate forming condition many shape failures such as less-filling, over-filling are happen in the crimping process. Even though the quality of crimping shape is satisfactory the quality check for electrical resistance of wire harness is sometime not satisfied the qualification due to large variation of electrical resistance of wire harness under climate test. This large variation is thought to be related with the malfunction automotive electric system and caused by the internal stress of wire, which occurred during the crimping process. In this paper we develop the 3D-FEM simulation scheme and design methodology of optimum terminal shape. Also the effect of terminal shape on the residual stress is discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.246-249
• /
• 2000

The effects of Zr on the mechanical workability and tensile strength of Cu-Ni-Mn-Sn-Al alloys have been investigated and the following results were obtained. The mechanical workability of Cu-Ni-Mn-Sn-Al alloys are increased with addition of Zr. And the surface cracks of specimen were not produced in Zr added Alloys. Especially in condition of hot-worked beyond the 90% working ratio, Zr contained specimen showed intra-granule crack propagation but Zr-free specimen showed inter-granule mode. The tensile strength have maximum value in 0.05% Zr contained alloy. The aging mechanism of Cu-Ni-Mn-Sn-Al alloys were varied by Zr addition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.143-147
• /
• 2014

The ECU which is operating inductive actuator like motor or solenoid should be designed with considering the heat removal performance and the EMC performance. In most cases, these two performances are trade-off. Especially, the metal cover with plastic housing for improving heat removal performance can affect EMC performance by coupling the noise source to harness cable and connector. Therefore, after analyzing the EMC effectiveness of the metal cover, countermeasures for EMC noise reduction should be established. In this paper, by simulating and testing of AHB Gen3 ECU, the influence of the metal cover to EMC performance is analyzed. And based on this result, we propose solutions for EMC noise reduction.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.263-271
• /
• 2014

Recent AEC industry, is introducing BIM based design process which mainly focuses on collaboration and integration. Since BIM has characteristic of utilizing several design libraries in various fields across the AEC industry, obtaining BIM libraries are essential for introducing and applying the BIM successfully. Thus, creating BIM libraries and guidelines for various fields are needed. BIM libraries can be categorized into disciplines such as architectural, structural, mechanical and electrical industries. Especially, companies in mechanical industry possesses design data for creating BIM library. Due to the fact, we standardized the property information for BIM libraries. And for BIM library production, we have developed a program which uses neutral format to convert 3D MCAD data designed by $NX^{TM}$ into $Revit^{TM}$ Family. Finally, we developed a program that merges property information to Revit Family file.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.408-409
• /
• 2007

Ferrule function have connect Optical Communication Cable. But Ferrule have important role that is decided transmission efficiency and information quality. Key-point of detailed drawing of ferrule is Anti-Reflection. In the study Broadband Anti-Reflection coating Film was design for ferrule of optical connector and deposited in low temperature by Ion-Assisted Deposition system. Optical thin film materials($Ta_2O_5$, $SiO_2$) were manufactured Index and Film thickness. $Ta_2O_5$ index is 2.123 ~ 2.125 and $SiO_2$ is 1.44 ~ 1.442. Reflection Loss of film deposited on Ferrule is 30.1[dB].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.109-122
• /
• 2002

The standard capacitor must have not only precise value of the capacitance but also the basic properties of low dielectric loss tangent. In the reforming process of capacitors, the dielectric loss tangent must be also reformed. In this paper, the development of standard capacitors of 10 and 100pF for the dielectric loss tangent standard using $Al_{2}O_{3}$ Crystal and the measurement of dielectric loss tangent are discussed. The dielectric loss tangent depends upon the surface between electrode and dielectric in capacitor. With using the Electric Field Simulator, precise design values of electrode are simulated. For the purpose of measuring capacitance effect just in the dielectric, 3-Terminal and 4-Terminal Pair configuration are applied respectively at the electrode and the connector for the measuring equipment. As stated above method, the standard capacitors of 10 and l00pF for the establishment of the dielectric loss tangent standard using the $Al_{2}O_{3}$ Crystal are made with low dielectric loss tangent less than 10-4.

• Journal of information and communication convergence engineering
• /
• v.20 no.1
• /
• pp.49-57
• /
• 2022

Fertilizers have long been used to increase crop yields; however, farmers are still having difficulties in managing fertilizers for growing crops as well as economic problems. The conventional method of soil sampling and laboratory analysis to determine soil pH is time consuming and costly; therefore, a portable pH sensor is developed to characterize spatial or temporal variability within fields via rapid and dense data acquisition. The portable pH sensor comprises an electrode unit, a portable console, and a USB connector. The soil water content (SWC) and electrical conductivity (EC) affect the electrical resistance of soil. An artificial test soil is performed to evaluate the effect of SWC and EC on soil pH. The test results show that stable pH measurements are achieved at SWCs greater than 20 mL (16.3%). Regardless of the SWC, the electric potential difference (EPD) remains at 2.5 g of NaCl. As the EC increases in the soil samples, the EPD increases.