• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.365-380
• /
• 2021

Although traditional steel-concrete composite beams have excellent structural characteristics, it cannot meet the requirement of quick assembly and repair in the engineering. This paper presents a study on static behavior of bolt connected steel-concrete composite beam without post-cast zone. A three-dimensional finite element model was developed with its accuracy and reliability validated by available experimental results. The analysis results show that in the normal service stage, the bolt is basically in the state of unidirectional stress with the loss of pretightening can be ignored. Parametric studies are presented to quantify the effects of the post-cast zone, size and position of splicing gap on the behavior of the beam. Based on the studies, suggested size of gap and installation order were proposed. It is also confirmed that optimized concrete slab in mid-span can reduce the requirement of construction accuracy.

• Archives of Plastic Surgery
• /
• 제49권6호
• /
• pp.764-768
• /
• 2022

The wrap-around flap (WAF) has become a popular approach to thumb reconstruction because the results are functionally and cosmetically excellent. By modifying to a partial toenail transfer, the WAF can also be used for finger reconstruction. However, performing cosmetically superior finger reconstruction is a significant challenge because it is difficult to reconstruct the natural nailfold by partial nail transplantation, although partial nail transplantation is required to reconstruct a narrow fingernail. One side of the reconstructed lateral nailfold tends to be a missing nail margin, and one side of the proximal nailfold angle tends to be retracted. Based on the rationale that loss of the lateral nailfold volume due to the postoperative tension of the volar flap would result in a missing nail margin, the volume of the lateral nailfold was maintained with a single thread that was passed from the nail to the volar flap. Additionally, half of the proximal nailfold from the nail plate was elevated to advance it forward. The results indicated that a cosmetically natural nailfold was achieved with the WAF approach to finger reconstruction. These easy and simple techniques enable reconstruction of a cosmetically natural nailfold using WAF for finger reconstruction.

• 한국경영과학회지
• /
• 제17권1호
• /
• pp.117-117
• /
• 1992

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• 한국정보통신학회논문지
• /
• 제24권11호
• /
• pp.1484-1491
• /
• 2020

슬롯 선로는 슬롯을 통해 전계와 자계 신호가 전달되기 때문에 슬롯의 크기가 전력 손실에 크게 영향을 준다. 일반 적으로 슬롯 선로는 낮은 전력 손실로 동작하기 위해 상대적으로 높은 비유전율(er)의 기판에서 3GHz 이상의 높은 주파수에서 사용하게 된다. 본 논문에서는 상대적으로 낮은 비유전율(er)을 가지는 Taconic사의 TLC-30(er=3) 기판을 이용하여 중심주파수 1.85GHz에서 동작하는 슬롯 선로를 이용한 4:1 임피던스 변환기를 제안하였다. 제안된 임피던스 변환기에서의 슬롯 선로는 슬롯 선로 위에 유전체 공진기를 배치하여 슬롯 선로에서의 신호 손실을 줄였다. 비유전율(er) 38의 (Zr,Sn)TiO4을 이용하여 만든 유전체 공진기를 사용한 4:1 마이크로스트립-슬롯 선로 임피던스 변환기는 1.855GHz에서 삽입 특성(S21) -0.375dB와 반사 특성(S11) -27.6dB를 보였다. 이는 유전체 공진기를 이용하면 상대적으로 낮은 비유전율 기판과 낮은 주파수 영역에서도 안정적으로 슬롯 선로를 이용할 수 있음을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.339-345
• /
• 2014

집성재의 생산성 향상을 위한 고주파 가열 경화기술에 대해 연구하였다. 고주파가 유전체에 가해지면 내부에서 에너지 손실에 의한 발열이 발생한다. 집성재를 구성하는 라미나와 접착제는 유전체이므로 집성재에 고주파를 주사하면 내부에서 발열이 발생한다. 집성재 제조에 이용되는 대부분의 상온 경화형 접착제는 고온에서 빠른 경화가 이루어지므로 고주파 가열 기술을 이용하면 집성재 내부 접착층의 온도를 상승시킴으로써 빠른 경화를 유도할 수 있다. 본 연구에서는 낙엽송재와 phenol-resorcinol-formaldehyde (PRF) 접착제의 유전 특성을 평가하고, 집성재 내부의 접착층의 빠른 경화를 유도하는 고주파 가열 경화 기작을 이론적으로 분석하였다. 연구 결과, 온도상승인자인 PRF 접착제의 상대손실계수가 낙엽송재의 상대손실계수에 비해 높았으나, 온도상승저해인자인 밀도와 비열도 높았다. 그러나 상대손실계수의 비율이 온도상승저해인자의 비율보다 높기 때문에 고주파 가열에 의한 발열량은 접착제에서 더 높을 것으로 예상된다. 이러한 실험 결과를 이용한 이론적 접근을 바탕으로, 접착층이 목표온도까지 상승하기 위한 ISM 영역의 고주파 주파수 별 전기장의 상대 세기를 추정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1745-1747
• /
• 2004

In order to anticipate gradual increase of fault current in electric power systems, current limiting technology and current limiting device has been investigated for a long time. But the commercial use of current limiting device was delayed due to the lack of effective method to insert impedance to the elective power systems without loss and surplus defects. However, novel current limiting device, which use superconducting materials, was considered as a dream technology to be applied in a distribution and transmission lines. LG Industrial systems and KERPI started to investigate resistive type superconducting fault current limiters in order to develop 154kV fault current limiters and this year, we succeed to test 3 phase 6.6kV/200A fault current limiters. Based on these achievements, 24kV superconducting fault current limiters will be realized withing 3 years which could be tested in a real fields. In this paper, the developments of fault current limiting module which use YBCO thin films, cryogenic systems, the structure and construction of 3 phase fault current limiters and finally the test results of 6.6kV superconducting fault current limiters will be introduced.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.84.1-84.1
• /
• 2015

Recent years in particular in Korea see intensive interests in a deep geothermal engineering and its application in different uses as far as from direct uses to power generation sectors, that are achieved by harnessing hot energy sources from the earth. For instance widespread interest has been generated because the geothermal energy is the source that one extracts it for more than 20 hours per day and for about 30 years of an operation of the plant, which enables to give base load as for heating as well as an electric generation. In retrospect, shallow geothermal energy using heat pumps is commonplace in Korea while the deep geothermal is in the early stage of the development. Geothermal energies in view of the way of extracting heat are mainly categorized into several types such as a single well system, a hydrothermal system, an enhanced geothermal system (EGS) etc. In this talk, this speaker focuses on the thermo-fluid engineering of the single well system by introducing the modeling in order to harness hot fluid that is thermally balanced with the fluid of an injection well, which provides a challenge to assess the life time of the well. To avoid the loss of the temperature in producing the hot fluid, a specialized pipe or a borehole heat exchanger has been designed, and its concept is introduced. On the other hand, a binary system or an organic Rankine cycle, which provides the methodology to convert the heat into an electricity, is briefly introduced. Some experimental results of the binary system which has been constructed in our lab will be presented. Lastly as for the future direction, some comments for the industrialization of the deep geothermal energy in this country will be discussed.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.121-136
• /
• 1989

圓筒形 物體의 오목면과 블록면의 表面에 密着하여 設置한 마이크로스트립 어레이 안테나의 輻射 特性에 관하여 理論的 解析을 試圖하였으며, 實驗을 통하여 檢證하였다. 單一素子 안테나의 解析은 傳送線路 모델法을 適用하였고, 어레이 안테나의 理論은 曲面 위에 2次元的으로 配列된 각각의 單一素子에 대하여 座標移動과 回轉을 考慮한 座標變換法으로 解析하여 遠距離에서의 合成 電界 强度를 數値計算으로 구하였으며, 10GHz에서 4素子 竝列 어레이 안테나 및 마이크로스트립 給電線路를 設計 製作하여 여러 가지 曲率半徑에 대하여 反射損失, 共振周波數, 輻射패턴, 半 電力 비임幅, 利得 등과 같은 諸 輻射特性을 測定하겨 理論値와 比較 考察하였다. 理論에서 豫測한 바와 같이 오목면과 블록면에서 모두 曲率半徑의 減少에 따라 輻射 패턴의 비임 폭이 더 커지는 것을 確認하였으며, 曲面에서 座標變換法으로 計算한 마이크로스트립 竝列 어레이 안테나의 合成 輻射電力 패턴이 測定値와 잘 一致하였다. 아울러 曲率半徑의 變化에 따른 周波數의 變化, 入力 임피던스 및 利得의 變化는 無視할 수 있을 程度임을 確認하였다.