• The KSFM Journal of Fluid Machinery
• /
• v.7 no.3 s.24
• /
• pp.7-13
• /
• 2004

In this paper, we identify the noise source and the path of a chiller. This chiller is newly developed for R-l34a refrigerant and 250 RT cooling capacity. The measured overall SPL of the developed turbo-chiller is about 100 dBA. Due to the high rotating speed of the centrifugal impeller, the nun noise source of the chiller is the blade passing frequency and its higher harmonics of the centrifugal impeller. This generated soundpropagates through the duct, and then transmits and radiates to the outer field. From the experiment, it is found that the high frequency noise is mostlytransmitted and radiated through the elbow duct, but the low frequency noise is transmitted and vadiated through the condenser wall. Therefore applying the absorbing material is an effective way of reducing the high and low frequency noise simultaneously. Measurement results show that the application of the sound absorbing material to the elbow duct reduced the overall sound pressure level by 4 dB compared to the 9 dBA reduction for the case of full enclosure. In order to control the generated noise, a dissipativetype silencer is also designed and tested. The silencer reduced the radiated noise about 7.5 dBA.

• Clinics in Shoulder and Elbow
• /
• v.7 no.1
• /
• pp.14-22
• /
• 2004

Purpose: To evaluate a usefulness of the simple radiograph in the patients with chronic shoulder pain 50 years and older. Material and method: 1152 patients with chronic shoulder pain and 100 asymptomatic individuals were involved in this study. All patients were 50 years and older. We excluded patients who had a history of fracture or dislocation. Radiographic interpretation was performed on a shoulder AP view, an axillary view and a supraspinatus outlet view. For statistical analysis, a chi-square test was performed. A p value of <0.05 was considered statistically significant. Results: Abnormal radiologic findings were identified in 369(32%) out of 1152 patients with a shoulder pain: greater tuberosity sclerosis, acromial sclerosis, subacromial osteophytes are common abnormal radiologic findings. A rotator cuff tear or impingement syndrome was identified on a final diagnosis in 61(85.2%) out of the 76 patients with radiologic abnormalities in both greater tuberosity and acromion (p<0.05). Abnormal radiologic findings were identified in 18% of the asymptomatic individuals. Conclusion: Simple radiographic analysis is an important primary diagnostic tool in patients (50 years and old) with chronic shoulder pain.

• IE interfaces
• /
• v.17 no.2
• /
• pp.218-225
• /
• 2004

This study aims to investigate effect of external load and motion repetitiveness on perceived discomfort. An experiment was performed for measuring discomfort scores at varying conditions, in which external load, motion repetitiveness and arm posture were employed as experimental variables. The arm posture was controlled by shoulder flexion and abduction, and by elbow flexion. Fifteen healthy college-age students without history of musculoskeletal disorders voluntarily participated in the experiment. The results showed that the effect of external load, motion repetitiveness and shoulder posture on discomfort were statistically significant, but that elbow posture did not significantly affect discomfort ratings. The effect of external load was much larger than that of any other variables, and that of repetitiveness was second only to external load. Discomfort scores significantly increased linearly as the levels of external load and motion repetitiveness increased. This implies that although they were not fully reflected in the existing posture classification scheme such as OWAS, RULA, etc., the effect of external load and motion repetitiveness should be taken into consideration for precisely quantifying work load in industry. Based on regression analysis, equivalent values of external load and motion repetitiveness in terms of discomfort scores were provided, which would be useful for better understanding the degree of their effect on work load.

• The Korean Journal of Pain
• /
• v.21 no.3
• /
• pp.224-228
• /
• 2008

Ulnar nerve compression in the cubital tunnel is a common entrapment syndrome of the upper limb. Pulsed radiofrequency lesioning (PRFL) has been reported as a treatment method for relieving neuropathic pain. Since the placement of the electrode in close proximity to a targeted nerve is very important for the success of PRFL, ultrasound seems to be well suited for this technique. A 36-year-old woman presented with complaints of numbness and pain on the medial aspect of the elbow and the pain radiated down to the $4^{th}$ and $5^{th}$ fingers for 10 years after she suffered an elbow contusion, we then scheduled this woman for the ultrasound guided PRFL of the ulanr nerve. The initial ultrasound examination demonstrated a swollen nerve, loss of the fascicular pattern and an increased cross sectional area of the ulnar nerve. After confirmation of the most swollen site of the nerve via ultrasound, two sessions of PRFL were performed. The postprocedural 10 cm visual analog scale score decreased from 8 to 1 after the two sessions of PRFL.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.76-83
• /
• 2004

This study aimed to empirically investigate perceived discomfort depending upon external load, upper limb postures and their holding time. Discomfort was obtained through an experiment, in which external load, wrist flexion/extension, elbow flexion, shoulder flexion and adduction/abduction were used as experimental variables. The subjects were instructed to hold given postures for 60s and to rate their subjective discomfort scores at 5s, 20s, 40s and 60s by using the free modulus method of magnitude estimation. The results showed that while only external load and elbow flexion were statistically significant at the holding time of 5s at ${\alpha}=0.05$ or 0.10, external load and upper limb postures excluding shoulder adduction/abduction significantly affected discomfort ratings at 20s, 40s and 60s at ${\alpha}=0.01$ or 0.05. Discomfort scores were also significantly different between four posture holding times at ${\alpha}=0.01$. The effects of external load and holding time were much larger than those of upper limb postures. Based on the results of this study, it is recommended that external load and holding time as well as working postures betaken into consideration to precisely quantify postural load in industry.

• Journal of Korean Academy of Nursing
• /
• v.36 no.3
• /
• pp.484-492
• /
• 2006

Purpose: The purpose of this study was to investigate the effects of a rehabilitation nursing program(RNP) for persons with disabilities. Method: a quasi-experimental pretest and post test study was used to examine the changes of patient's muscle strength, flexibility, self efficacy and health related quality of life at the completion of an 8-week education and physical exercise with a Thera-Band and Exercise Ball course. The subjects consisted of 40 adults who were disabled. Twenty-two experimental and 18 control subjects completed pre and post-test measures. Outcome variables were flexibility, hand grip, elbow flexor and extensor, knee flexor and extensor, self efficacy and quality of life. Independent t-test and ANCOVA were used to examine group differences by using SPSS 12.0 Result: Mean comparisons of the change scores revealed that the experimental group increased significantly in knee extremity flexor(p=0.035), extensor(p=0.039), flexibility(p=0.008), self efficacy(p=0.000), and quality of life(p=0.000). No significant group differences were found in each patient's hand grip, elbow flexor and extensor. Conclusion: RNP can improve lower extremity flexibility, muscle strength, self efficacy and health related quality of life in people with disabilities. The intervention to tailor exercise and education to the unique needs of the disability was suggested for further study.

• Clinics in Shoulder and Elbow
• /
• v.4 no.1
• /
• pp.13-16
• /
• 2001

Object: To determine the sensitivity, specificity, and positive and negative predictive values of an empty can test for diagnosing supraspinatus tendon tear. Methods: We reviewed 146 patients who have shoulder pain with limited active range of motion. We evaluated patients according to empty can test. Sensitivity, specificity, and positive and negative predictive values for supraspinatus test was estimated using arthroscopic evaluation. Results: A hundred and twenty-four of 127 cases with positive empty can test had supraspinatus tendon tear. Of 19 samples with negative empty can test, 15 had no supraspinatus tear. Sensitivity, specificity, and positive and negative predictive values for the empty can test were 97.6%, 83.3%, 97.6%, and 78.9%, respectively. Conclusions: Empty can test was found to have a high sensitivity and good positive predictive value in identifying the tear of rotator cuff tendon. We concluded that empty can test of the shoulder is a reliable diagnostic method which could be used for the diagnosis of rotator cuff tear.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.341-352
• /
• 2016

Manual 3D pipeline modeling from LiDAR scanned point cloud data is laborious and time-consuming process. This paper presents a method to extract the pipe, elbow and branch information which is essential to the automatic modeling of the pipeline connection. The pipe geometry is estimated from the point cloud data through the Hough transform and the elbow position is calculated by the medial axis intersection for assembling the nearest pair of pipes. The branch is also created for a pair of pipe segments by estimating the virtual points on one pipe segment and checking for any feasible intersection with the other pipe's endpoint within the pre-defined range of distance. As a result of the automatic modeling, a complete 3D pipeline model is generated by connecting the extracted information of pipes, elbows and branches.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 1995.05a
• /
• pp.13-13
• /
• 1995

The authors performed the arthroscopic decompression and cuff debridement on 47 cases in 45 consecutive patients with either stage II or stage III impingement syndrome from July 1990 to January 1994. The summarized results are as follows. 1. 47 cases in 45 consecutive patients had arthroscopic decompression for the subacromial impingement syndrome. 2. There were 31 males and 14 females and the mean age was 40 years for men and 46years for women. 3. The follow up duration was from 3 years 9 months to 1 year (average 2 years 1month). 4. Among 47 cases, 19 cases were found to have no cuff tear (stageII) 13 cases partial thickness cuff tear (stage IIIa) 10 cases complete tear on cuff less than 3 cm long (stage IIIb) and 5 cases complete tear on cuff more than 3 em in length (stage IIIc). 5. The arthroscopic subacromial decompression and rotator cuff debridement was a good treatment method in stage II and stage IIIa and stage IIIb. in the case of stage IIIc rotator cuff tear, it was useful for pain relief and improvement of shoulder function.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.175-175
• /
• 2009

Despite its importance for the understanding of joint kinematics in vivo, there has been few studies about shoulder joints. The purpose of this study is to analyze the glenohumeral joint during internal and external rotation at 90 degrees of abduction using in vivo noninvasive motion analysis system. MRI was performed for the following seven positions from maximum internal rotation to maximum external rotation at intervals of 30 degrees. We used 3D-gradient echo sequencing (TR: 12 ms, TE: 5.8 ms, 0.8 mm-slice thickness). Our method is based on matching three-dimensional MR images by the similarity of the image intensity. We analyzed the in vivo three-dimensional motions of the glenohumeral and scapulothoracic joint during this motion. In scapla plane, the mean rotation angle of the glenohumeral join was 105.5 degrees ($SD{\pm}39.0^{\circ}$). The mean rotation angle of the scapulothracic joint was 27.5 degrees ($SD\;{\pm}\;7.7^{\circ}$). The contribution ratio is almost 3.8:1 of glenohumeral and scapulothracic joint respectively.