• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.348-363
• /
• 2013

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.91-97
• /
• 2002

Total stress analysis method and nonlinear constitutive models have been used to analyze a dynamic performance of Dams but, there is some limitation in analysis, for example, effects of build up of pore pressure and generations of permanent deformations. Therefore considering these limitations, which is mentioned before, dynamic behavior characteristics of dams and response acceleration characteristics was analyzed in time domain, applying an elasto-plastic constitutive model and effective analysis method.

• Wind and Structures
• /
• 제7권3호
• /
• pp.203-214
• /
• 2004

This paper describes a method for developing a multi-degree-of freedom aero-elasto-plastic model of a base-isolated mid-rise building. The horizontal stiffness of isolators is modeled by several tension springs and the vertical support is performed by air pressure from a compressor. A lead damper and a steel damper are modeled by a U-shaped lead line and an aluminum line. With this model, the frequency ratio of torsional vibration to sway vibration, and plastic displacements of isolation materials can be changed easily when needed. The results of isolation material tests and free vibration tests show that this model provides the object performance. The peak displacement factors are about 4.5 regardless of wind speed in wind tunnel tests, but their gust response factor decreases with increment of wind speed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.327-334
• /
• 2001

This paper presents a non-linear analysis procedure for plane frame structures by finite element formulation with assumptions of Timoshenko beam theory. Finite element displacement method based on Lagrangian formulation is used and two-noded and isoparametric line element is adopted to represent finite element model. The layered approach is used for the elasto-plastic analysis of the plane frame structures with rectangular and I cross sections. A load incremental method combined with the tangent stiffness and the initial stiffness methods for each load increment is used for the solution of non-linear equations. Numerical examples are presented to investigate the behavior and the accuracy of the elasto-plastic non-linear application and the results of this study are compared with other solutions using the concept of plastic hinge.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.245-256
• /
• 2014

I-core sandwich panel that has been used more widely is assembled using high power $CO_2$ laser welding. Kim et al. (2013) proposed a circular cone type heat source model for the T-joint laser welding between face plate and core. It can cover the negative defocus which is commonly adopted in T-joint laser welding to provide deeper penetration. In part I, a volumetric heat source model is proposed and it is verified thorough a comparison of melting zone on the cross section with experiment results. The proposed model can be used for heat transfer analysis and thermal elasto-plastic analysis to predict welding deformation that occurs during laser welding. In terms of computational time, since the thermal elasto-plastic analysis using 3D solid elements is quite time consuming, shell element model with multi-layers have been employed instead. However, the conventional layered approach is not appropriate for the application of heat load at T-Joint. This paper, Part II, suggests a new method to arrange different number of layers for face plate and core in order to impose heat load only to the face plate.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.179-192
• /
• 1992

연속해 손상역학 분야의 열역학적 정식화 과정에 따라 연성재료의 탄소성-손상 구성방정식을 유도하였다. 이때, 재료 내부의 비가역적인 열역학적 상태변화를 표현하는 소성변형, 손상진전 등의 물리적현상을 내부상태변수로 간주하였다. 이 새로운 구성방정식 모형을 실제 문제에 적용함으로써 연성재료의 탄소성 거동 뿐만 아니라 재료의 자체가 손상을 입어 약화되는 과정 까지도 합리적으로 예측 가능함을 확인할 수 있었다.

• 한국농공학회지
• /
• 제44권3호
• /
• pp.92-100
• /
• 2002

The advent or high-strength steel has enabled the arch structures to be relatively light, durable and long-spanned by reducing the cross sectional area. On the other hand, the possibility of collapse may be increased due to the slender members which may cause the stability problems. The limit analysis to estimate the ultimate load is based on the concept of collapse mechanism that forms the plastic zone through the full transverse sections. So, it is not appropriate to apply it directly to the instability analysis of arch structures that are composed with compressive members. The objective of this study is to evaluate the ultimate load carrying capacity of the parabolic arch by using the elasto-plastic finite element model. As the rise to span ratio (h/L) varies from 0.0 to 0.5 with the increment of 0.05, the ultimate load has been calculated fur arch structures subjected to uniformly distributed vertical loads. Also, the disco-elasto-plastic analysis has been carried out to find the duration time until the behavior of arch begins to show the stable state when the estimated ultimate load is applied. It may be noted that the maximum ultimate lead of the parabolic arch occurs at h/L=0.2, and the appropriate ratio can be recommended between 0.2 and 0.3. Moreover, it is shown that the circular arch may be more suitable when the h/L ratio is less than 0.2, however, the parabolic arch can be suggested when the h/L ratio is greater than 0.3. The ultimate load carrying capacity of parabolic arch can be estimated by the well-known formula of kEI/L$^3$where the values of k have been reported in this study. In addition, there is no general tendency to obtain the duration time of arch structures subjected to the ultimate load in order to reach the steady state. Merely, it is observed that the duration time is the shortest when the h/L ratio is 0.1, and the longest when the h/L ratio is 0.2.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.85-94
• /
• 1997

지하공간에 대한 설계 및 시공시에는 필연적으로 많온 불확정성이 내포되어 있다. 가장 중요 한 요소로는 설계단계 에서 입력 값으로 사용하는 지반계수이며, 이의 정 확한 산정 에는 많은 어려 움이 따른다. 특히, 지하공동의 굴착으로 인해 소성영역이 발생하게 되면, 지반거동은 항복규준 을 결정짓는 강도정수에 민감한 반응을 나타내므로 탄성해석법에만 근거한 역 해석기법의 적용 으로는 신뢰성 있는 지반계수를 추정할 수 없게 된다. 본 논문에서는 지하공간의 설계와 시공의 유기적인 결합으로 터널의 소성상태까지 고려할 수 있는 최적의 지반계수를 산정하기 위하여, 초기예측치와 계측치로부터 예측된 값을 합리적으로 조합할 수 있는 확장 Bayesian방법(Extended Bayesian Method:EBM)을 적용하였다. 지반 조합 거동 예측은 Mohr-Coulomb 항복규준에 근거한 탄.소성 유한요소해석법을 사용하였다. 개발된 피드백 시스템의 효용성을 검증하기 위하여 소성 거동을 나타내는 단면에 대해 예제해석을 수행하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1988년도 가을 학술발표회 논문집
• /
• pp.24-29
• /
• 1988

In this paper, it is proposed hew the rigid element method suggested in the first paper can be applied to the elastic and elasto-plastic analysis of spherical shell with the open stiff ring. In the analytical model, the solution domain is divided into rectangular-shaped spherical bending elements. Each contact surface of two adjacent elements is interconnected with four elastic springs, and it is assumed that the internal forces are distritributed into springs. The 6 degrees of freedom of the element are placed in the center of elements, and the 6 cen-teroidal rigid displacements affect other elements through springs around elements. And then the solution domain is estimated by the behavior of elements and springs. In this study, these concepts are applied to the elastic and elasto-plastic analysis for the eight cases of the spherical shell according to the condition of stiff ring, the condion of loading and the size of opening. And then some numerical results such as the distribution of stresses, the force-displacement curves and the mode of fractures will he shown.