• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.6-12
• /
• 2018

본 최근 건축물 외벽공사에 커튼월 공법의 사용이 증가하고 있다. 외벽 커튼월 공법은 공기단축 및 경제적 효용이 크다는 장점으로 인해 건물의 외벽으로도 널리 시공되고 있다. 그러나, 커튼월 공법의 프레임과 유리를 연결해 주는 구조용 실란트에 대한 내후성 및 구조물의 거동에 대한 열화를 대체한 시험은 KS F 4910 규격에는 부재한 실정으로 안정적인 커튼월 공법 도입과 품질향상을 위해서는 필요한 요소이다. 본 연구에서는 외기환경하에서 거동에 대한 탄성복원력시험을 실시하였다. 구조용 실란트를 대상으로 열에 대한 실링재의 열화를 평가하였다. 국내에서는 구조용 실란트의 가변형 변위거동에 대한 연구는 부족한 실정으로 본 연구에서는 외기 환경에 노출된 열화조건을 대체하여 실험실 조건에서 재현한 결과를 확인하고, 설계에 반영하고자 한다. 본 연구 결과에 따르면, 기존의 구조용 실링재는 KS F 4910의 품질기준은 만족하지만, 본 연구에서 실시한 조건에서는 시험체의 파단과 표면의 균열 등이 발생하는 것을 확인하였다. 특히, 내후성 시험에서는 시험체 모두 불용의 상태를 확인하여 향후, 커튼월 공법에 사용되는 구조용 실링재의 장기적인 내구성능 평가가 필요한 것으로 판단된다. 따라서, 기존의 구조용 실링재가 현장에 적용되기 위해서는 별도의 내구성능 평가를 실시가 요구된다.

• 대한치과의사협회지
• /
• 제48권4호
• /
• pp.297-307
• /
• 2010

Noncarious cervical lesions(NCCLs) are characterized as structural defects found on the tooth surface of the cement-enamel junction. Loss of tooth structure through noncarious mechanisms may vary in etiology and clinical presentation for each individual but presently many clinician now classify this as tooth failure of abfraction due to the stress applied in the cervical area of the tooth under oral physiological and pathological loads. In the current study, we investigated the stress distribution of maxillary premolar with NCCL using simulated 3D finite element analysis. The results were as follows: 1. In the sound maxillary premolar, the stresses were highly concentrated at cervical enamel surface of the mesiobuccal line angle, asymmetrically. 2. Once the lesion has been formed, the highest stress concentration was observed around the apex of the wedge shaped lesion. 3. In four types of NCCL, the patterns of stress distribution were similar and the peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 4. Lesion cavity modification of rounding apex, reduced stress of lesion apex. 5. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.103.2-103
• /
• 2001

In this paper, we discusses compliant actuators those are made of electrostrictive polymer. Electrostrictive polymer actuators(EPAs) are based on the deformation of dielectric elastomer polymer in the presence of an electric field. We address actual design and fabrication method of an actuator using the electrostrictive polymer. We have developed primitive prototypes of the actuator using elastic restoring force. And they actuators have 1 to 3 DOF, 1 DOF actuators are simple linear actuators and 3 DOF actuator has linear actuation and steering capability. They are simple in structure with lightweight, high trust, force and large stroke. Basic design principles and experimental procedures for confirming their performance will be introduced.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.387-395
• /
• 1998

In general, the laminated rubber bearing (LRB), a composite structure laminated with the elastic rubber and steel plates, has a complex hysteretic nonlinear characteristics in relationships between the restoring force and shear deflection. The representative nonlinear characteristics of LRB include the change of hysteresis loop with cyclic shear deflections and the hardening effects at large shear deflection regions. Changes of the hysteresis loop of LRB with cyclic shear deflections affect the horizontal stiffness and the damping characteristics. The hardening behavior of LRB in large shear deflection region results in an increased horizontal stiffness and therefore, has a great impacton the seismic responses. In this paper, the seismic response analysis is carried out using the modified hysteretic bi-linear model of LRB, which takes into account the hysteresis loop change and the hardening behavior with cyclic shear deflection. The results on seismic responses are compared with those obtained using the widely used hysteretic hi-linear model. The new model is found to reveal the greater amount of peak acceleration response.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.809-822
• /
• 2013

Base isolation is widely used in seismic resisting buildings due to its low construction cost, high reliability, mature theory and convenient usage. However, it is difficult to design the isolation layer in high-rise buildings using the available bearings because high-rise buildings are characterized with long period, low horizontal stiffness, and complex re-distribution of the internal forces under earthquake loads etc. In this paper, a simple and innovative isolation bearing, named Teflon-based lead rubber isolation bearing, is developed to address the mentioned problems. The Teflon-based lead rubber isolation bearing consists of friction material and lead rubber isolation bearing. Hence, it integrates advantages of friction bearings and lead rubber isolation bearings so that improves the stability of base isolation system. An experimental study was conducted to validate the effectiveness of this new bearing. The effects of vertical loading, displacement amplitude and loading frequency on the force-displacement relationship and energy dissipation capacity of the Teflon-based lead rubber isolation bearing were studied. An analytical model was also proposed to predict the force-displacement relationship of the new bearing. Comparison of analytical and experimental results showed that the analytical model can accurately predict the force-displacement relationship and elastic shear deflection of the Teflon-based lead rubber isolation bearings.

• Structural Engineering and Mechanics
• /
• 제58권6호
• /
• pp.967-988
• /
• 2016

Due to the significant aerodynamic interference from sub-towers and surrounding tall buildings, the wind loads and dynamic responses on main tower of three-tower connected tall building typically change especially compared with those on the isolated single tall building. This paper addresses the wind load effects and equivalent static wind loads (ESWLs) of three-tower connected tall building based on measured synchronous surface pressures in a wind tunnel. The variations of the global shape coefficients and extremum wind loads of main tower structure with or without interference effect under different wind directions are studied, pointing out the deficiency of the traditional wind loads based on the load codes for the three-tower connected tall building. The ESWLs calculation method based on elastic restoring forces is proposed, which completely contains the quasi-static item, inertia item and the coupled effect between them. Then the wind-induced displacement and acceleration responses for main tower of three-tower connected tall building in the horizontal and torsional directions are investigated, subsequently the structural basal and floor ESWLs under different return periods, wind directions and damping ratios are studied. Finally, the action mechanism of interference effect on structural wind effects is investigated. Main conclusions can provide a sientific basis for the wind-resistant design of such three-tower connected tall building.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.17-22
• /
• 2019

Currently, studies on weight reduction and fuel efficiency increase are the most important topics in the automotive industry and many studies are under way. Among them, weight reduction is the best way to raise fuel efficiency and solve environmental pollution and resource depletion. Materials such as aluminum, magnesium and carbon curing materials can be found in lightweight materials. Among these, research on improvement of bonding technology and manufacturing method of materials and improvement of material properties through study of ultrahigh strength steel sheet is expected to be the biggest part of material weight reduction. As the strength of the ultra hight strength steel sheet increases during forming, it is difficult to obtain the dimensional accuracy as the elastic restoring force increases compared to the hardness or high strength steel sheet. It is known that the spring back phenomenon is affected by various factors depending on the raw material and processing process. We have conducted analytical evaluations and studies to analyze the springback that occurs according to the cross-sectional shape of the ultra high tensile steel sheet.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.111-121
• /
• 2023

This paper intends to introduce the applicability of HydroQus to a problem of a tanker collision against a semi-submersible type floating offshore wind turbine (FOWT). HydroQus is a plug-in based on potential flow theory that generates interactive hydroforces in a commercial Finite element analysis (FEA) code Abaqus/Explicit. Frequency response analyses were conducted for a 10MW capacity FOWT to obtain hydrostatic and hydrodynamic constants. The tanker was modeled with rigid elements, while elastic-plastic elements were used for the FOWT. Mooring chains were modeled to implement station keeping ability of the FOWT. Two types of fracture models were considered: constant failure strain model and combined failure strain model HC-LN model composed of Hosford-Coulomb (HC) model & localized necking (LN) model. The damage extents were evaluated by hydroforces and failure strain models. The largest equivalent plastic strain observed in the cases where both restoring force and radiation force were considered. Stress triaxiality and damage indicator analysis showed that the application of HC-LN model was suitable. It could be stated that applications of suitable failure strain model and hydrodynamics into the collision simulations were of importance.

• Restorative Dentistry and Endodontics
• /
• 제33권1호
• /
• pp.28-38
• /
• 2008

본 연구는 3차원 유한요소 분석법적 연구를 통해 쐐기형 비우식성 치경부병소의 복합레진 수복물에서 다른 탄성계수를 가진 복합레진의 수복과 와동의 형태와 응력의 방향에 따른 응력분포의 영향에 대해 알아보고자 하였다. 발거된 상악 제2소구치를 Micro-CT로 스캔한 후 3D-DOCTOR로 3차원유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동과 변형시킨 와동을 형성하고 각 와동을 탄성계수가 서로 다른 혼합형 복합레진 또는 흐름성 복합레진으로 수복하였다. 수복 전, 후 협측교두와 설측교두에 500N의 하중을 가한 후 응력분포를 ANSYS 프로그램을 이용하여 주 응력 분석법으로 평가한 바 다음과 같은 결과를 얻었다. 1. 수복 전 응력은 근심측 백악법랑경계와 와동저 선각부에 집중되었으며 최대응력은 근심협측우각부에서 나타났다. 2. 와동수복 후 와동저 선각의 응력은 현저히 감소했으나 치경부측 변연의 응력은 수복전보다 증가하였다. 3. 쐐기형태의 병소의 수복 시 와동저 선각부는 탄성계수가 높은 재료가 유리하고 치경부측 변연은 탄성계수가 낮은 재료가 유리하였다. 4. 와동저 선각부를 둥글게 변화시키는 것은 압축응력은 감소시키지 않으나 인장응력은 감소시켰다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.70-78
• /
• 2023

보통중심가새골조는 단순한 설계절차를 갖는 이점이 있다. 이와 같은 이유로, 지진하중에 대한 내진성능이 다른 골조 시스템에 비해 크게 효과적이지 않음에도 불구하고 중간 또는 낮은 수준의 지진을 받는 소규모 골조 구조물에 널리 사용되어 왔다. 횡방향 지진 하에서 압축 거동에 대해 취약한 가새부재를 갖는 보통중심가새골조의 내진성능을 향상시키기 위해, 통상적으로 점성감쇠기에 의한 내진보강이 도입되어 왔다. 하지만, 점성감쇠기 자체는 일반적으로 구조물을 원래 위치로 복원시킬 수 있는 강성을 갖지 않는다. 이는 구조물에 잔류 변위를 유발시킬 수도 있다. 이 논문에서는 휨강성을 갖는 상·하부 보가 비선형-탄성 스프링 역할을 하여 외부 변위 이력을 받는 스프링-감쇠기 시스템을 원래 위치로 복원시키는 자가복원형 점성감쇠기 시스템이 개발되었다. 단순화된 골조 구조물에 대한 수치해석은 개발된 자가복원형 점성감쇠기 시스템을 포함할 경우 지진이 가해지는 동안 에너지 소산을 통해 어떻게 골조 구조물의 향상된 내진성능을 가져오는지 보여준다.