• 제목/요약/키워드: Elastic constants

검색결과 266건 처리시간 0.023초

양의 액정을 이용한 FFS모드에서 Splay Elastic Constant에 따른 전기-광학적 특성 연구 (Splay Elastic Constants Dependent Electro-Optic Characteristics of the Fringe Field Switching (FFS) Mode using the Liquid Crystal with Positive Dielectric Anisotropy)

  • 정준호;박지웅;안영주;김미영;이희규;이승은;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.469-470
    • /
    • 2008
  • We have studied electro-optic characteristics as a function of splay elastic constants ($K_{11}$) in the fringe-field switching (FFS) mode using the LC with positive dielectric anisotropy. When $K_{11}$ is increased from 7.7pN to 11.7pN, a maximum transmittance is slightly increased and rising time become a little bit fast. However, operating voltage and threshold voltage is independent. In opposition to rising time, decay time is not affected by $K_{11}$. We already know that $K_{11}$ affects tilt angle of liquid crystals. Therefore, on the occasion of high $K_{11}$, liquid crystals are mainly affected by twist deformation because the higher $K_{11}$, the less tilt angle. In the FFS device, high $K_{11}$ is favorable to reduce tilt angle in on state and thus improve rising response time.

  • PDF

The receding contact problem of two elastic layers supported by two elastic quarter planes

  • Yaylaci, Murat;Birinci, Ahmet
    • Structural Engineering and Mechanics
    • /
    • 제48권2호
    • /
    • pp.241-255
    • /
    • 2013
  • The receding contact problem for two elastic layers whose elastic constants and heights are different supported by two elastic quarter planes is considered. The lower layer is supported by two elastic quarter planes and the upper elastic layer is subjected to symmetrical distributed load whose heights are 2a on its top surface. It is assumed that the contact between all surfaces is frictionless and the effect of gravity force is neglected. The problem is formulated and solved by using Theory of Elasticity and Integral Transform Technique. The problem is reduced to a system of singular integral equations in which contact pressures are the unknown functions by using integral transform technique and boundary conditions of the problem. Stresses and displacements are expressed depending on the contact pressures using Fourier and Mellin formula technique. The singular integral equation is solved numerically by using Gauss-Jacobi integration formulation. Numerical results are obtained for various dimensionless quantities for the contact pressures and the contact areas are presented in graphics and tables.

미분변환법에 의한 탄성 지반상의 열림 균열을 가진 Euler-Bernoulli보의 진동 해석

  • 황기섭;윤종학;유영찬;신영재
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.690-695
    • /
    • 2003
  • The main purpose of this paper is to apply differential transformation method to vibration analysis of Euler-Bernoulli beam with open cracks on elastic foundation. The governing equation of motion of beam with open cracks on elastic foundation is derived. The concept of differential transformation is briefly introduced. The cracks are modeled by massless substitute spring. The effects of the crack location, size and the foundation constants, on the natural frequencies of the beam, are investigated.

  • PDF

다중시험편 시험에 의한 평면이방성 암석의 탄성상수 분석연구 제 1 보 - 자료해석을 중심으로 (Experimental Study on the Elastic Constants of A Transversely Isotropic Rock by Multi-Specimen Compression Tests Report 1 - Focus on Data Analysis)

  • 박철환;박찬;신중호;정용복
    • 터널과지하공간
    • /
    • 제20권6호
    • /
    • pp.455-464
    • /
    • 2010
  • 평면이방성 암석의 특성을 실험적으로 규명하기 위하여 이방성각도에 따른 일축압축강도 및 변형률, 탄성상수의 변화를 분석하였다. 실험에는 유상구조가 뚜렷한 유문암의 7개의 서로 다른 각도를 갖는 총 35개 시험편을 사용하였다. 본 연구의 제 1보에서는 시험자료의 각도에 따라 개별적인 분석을 주로 논의하였으며, 제 2보에서는 이들 자료를 종합적으로 검토할 것이다. 수평 및 수직시료에서는 가정식을 적용하지 않고 4개의 탄성상수를 얻을 수 있기 때문에 이들의 크기는 참값이라 결정할 수 있다. 변형률 측정에서 각도에 따라 자료의 분산 정도가 달라지는데, 작은 각도에서는 큰 각도보다 분산이 크게 나타났다. 겉보기 탄성계수의 변화는 각도에 따라 M자 또는 U자 형태로 측정되었다. 낮은 각도에서는 겉보기 탄성계수의 변화가 단조증가의 경향을 보이지 않으므로 Saint-Venant 식을 적용될 수 없으며, E1의 크기는 참값범위에 포함되는 값을 얻을 수 없다. 75도 각도의 시료는 변형률과 강도의 측정 편차가 가장 작게 나타났으며, 해석된 4개의 모든 탄성상수가 참값의 범위에 포함되었다. 따라서 만약 한 개의 시험편에서 평면이방성의 탄성상수를 얻고자하는 경우에, 이방성각도가 75도 근처의 시험편을 선정하는 것이 바람직하다.

축하중을 고려한 단순보상의 이동탄성계의 진동해석 (Dynamic behavior of moving Elastic Body System on Simple Beam with Axial Load)

  • 김영수
    • 한국해양공학회지
    • /
    • 제14권1호
    • /
    • pp.67-73
    • /
    • 2000
  • The dynamic behavior of a moving elastic body system with three constant velocitics on a simple beam with an axial load is analyzed by numerical method. A moving elastic body system is composed of an elastic body and a suspension unit with two unsprung masses. The governing equations are derived with an aid of Lagrange's equation. These equation are solved by Runge-Kutta method. The damping coefficients a spring constants of the suspension unit the force circular frequency on a moving elastic body the velocity of a moving elastic body system. These effects are more important in the high modes of a simple beam.

  • PDF

염 절임동안에 일어나는 무조직의 유변학적인 변화 (Change in rheological properties of radish during salting)

  • 김병용;조재선
    • Applied Biological Chemistry
    • /
    • 제35권5호
    • /
    • pp.399-403
    • /
    • 1992
  • 무의 염절임 과정에서 일어나는 염의 침투와 관련하여 무의 응력완화 변화를 측정하고 점탄성의 변화를 제시하였다. 침지 염용액의 농도와 침지온도가 증가할수록 염의 확산은 더 잘 일어났으나 염용액의 온도에 따른 염의 침투 정도는 낮은 염용액의 농도에 의해서 더 많은 영향을 미쳤다. 염장하지 않은 무의 높은 조직의 강도와 점탄성은 염용액의 온도를 증가시킴에 따라 초기 응력에 대한 조직의 강도약화를 보여 주었으며 응력완화의 정도도 빨라졌고 평형상태에서 잔여응력 양도 감소하였다. 또한 염용액의 농도가 증가할수록 무 조직의 응력완화정도와 잔존응력양의 변화가 거의 일치함을 보였다. 염용액의 온도와 농도를 증가시킴에 따라 염절인 무조직의 점탄성 성분들도 낮아졌는데, 온도에 따른 무의 점탄성의 낮아지는 정도는 염침투나 초기응력과 마찬가지로 낮은 염용액의 농도에서 더 많은 영향을 받았다.

  • PDF

f 전자가 희토류 화합물의 탄성 성질에 미치는 영향 (Effects of f Electrons on the Elastic Properties of Rare Earth Compounds)

  • 남균;유상구;김철구
    • 한국자기학회지
    • /
    • 제15권5호
    • /
    • pp.261-264
    • /
    • 2005
  • 띠 Jahn-Teller 효과를 기반으로 $Th_{3}P_4$형 구조 화합물인 $La_{3}S_4$$Ce_{3}S_4$의 탄성상수 $C'=(C_{11}-C_{12})/2$의 차이점을 연구하였다. 같은 구조를 갖는 두 화합물간의 유일한 차이점은 $Ce_{3}S_4$에는 자기적인 성질을 가진 f 전자가 존재한다는 것이다. 입방 결정장에 의해 둘로 갈라져 있는 $Ce^{3+}$ 이온의 f 전자 에너지 상태가 띠 Jahn-Teller 효과에 의한 탄성유화 현상에 미치는 영향을 조사하고, f 전자가 탄성유화를 억제하는 것을 보였다. 또한, 탄성상수의 계산을 통하여 얻어진 $Ce^{3+}$ 이온의 에너지 갈라짐 값이 자기 감수율의 측정에 의해 얻어진 실험치에 근접함을 확인하였다.

초음파 공명 분광법(RUS)을 이용한 SiC 입자강화 Al 기지복합재료의 탄성계수 해석 (Analysis of Elastic Constants in SiC Particulate Reinforced Al Matrix Composites by Resonant Ultrasound Spectroscopy)

  • 정현규;정용무;주영상;홍순형
    • 비파괴검사학회지
    • /
    • 제19권3호
    • /
    • pp.180-188
    • /
    • 1999
  • SiC 입자강화 2124Al 금속복합재료의 강화재 부피분율에 따른 탄성 stiffness를 초음파 공명 스펙트로스코피(resonant ultrasound spectroscopy: RUS) 방법을 이용하여 측정하였다. RUS 방법은 한 개의 소형 시편으로 9개의 독립변수를 가진 사방정계(orthorhombic) 탄성계수를 간단한 실험으로 측정 가능함을 보여주었다. SiC 강화재 부피분율 변화에 따른 탄성계수를 측정하였는데 이 경우 초기 추정 탄성계수를 구하기 위해서 부피 분율에 따른 미세조직 사진으로부터 강화재의 형상(aspect ratio)과 방향을 고려한 유효 aspect ratio 개념을 도입하였고. Mori-Tanaka 이론식에 의한 계산결과를 이용하였다. 이로부터 계산된 공진주파수와 RUS의 측정 공진주파수 사이를 최소화함으로 정확한 탄성계수를 측정하였다. 측정된 stiffnesses로부터 공학적 탄성계수인 Young's modulus를 계산하였으며, 계산된 Young's modulus와 압출방향으로 인장 시험한 Young's modulus를 비교분석 하였다. SiC 입자의 부피분율이 증가함에 따라 탄성계수가 증가함을 나타내었고, 탄성 stiffness의 거동은 강화재가 많이 첨가될수록 횡등방성(transversely isotropic)이 강하게 나타났으며 이것은 압출공정에 의해 강화재 입자의 방향성 재배열에 기인한다. 한편 일정크기 시편에 있어서 기본 공진주파수가 강화재 부피분율에 따라 고주파수 영역으로 이동하는 현상이 관찰되었으며, 이로 부터 비파괴적으로 강화재 부피분율을 예측할 수 있는 가능성을 제시하였다.

  • PDF

Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane

  • Yaylaci, Murat;Terzi, Cemalettin;Avcar, Mehmet
    • Structural Engineering and Mechanics
    • /
    • 제72권6호
    • /
    • pp.775-783
    • /
    • 2019
  • The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. In this context, Finite Element Method (FEM) based software called ANSYS and ABAQUS are used. It is assumed that the elastic layers have different elastic constants and heights and the external load is applied to the upper elastic layer by means of a rigid stamp. The problem is solved under the assumptions that the contact between two elastic layers, and between the rigid stamp are frictionless, the effect of gravity force is neglected. To validate the constructed model and obtained results a comparison is performed with the analytical results in literature. The numerical results for normal stresses and shear stresses are obtained for various parameters of load, material and geometry and are tabulated and illustrated.