• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.25-34
• /
• 2005

사질토상의 직접기초는 기초의 지지력보다 침하량이 기초의 설계에 있어 주요 지배요소이다. 침하량을 산정함에 있어 토질 특성치 중 표준관입시험 N치가 주된 요소이다. 그러므로, 침하량 예측시 장비 효율에 대한 적절한 N치의 보정이 이루어질 때 예측 침하량의 정확성이 확보된다. 특히, N치가 50/30이상인 지반의 경우 롯드의 30cm 관입시 타격수를 기록하는 것이 아니라 일반적으로 50회 타격시 롯드의 관입량으로 N치를 기록하고, 침하량 산정시 N치 50을 일률적용함으로 실측 침하량과 큰 오차를 보이게 된다. 이에, 본 연구에서는 N치 50/30이상인 지반의 침하량 산정을 위한 N치 보정방법을 제시하였다. 또한, 미보정 N치, 보정 N치를 적용하여 탄성이론에 근거한 4가지 방법과 7가지의 경험적 제안식으로 산정한 침하량을 평판재하시험 실측치와 비교 검토하였다. 연구 결과 풍화지반(풍화암)에서 탄성이론에 근거한 방법 중에는 Original Elastic Theory, 경험적 제안식 중에서는 Terzaghi-Peck(1948, 1967) modified 1 방법이 평판재하시험 실측치에 가까운 값을 보였다.

• 한국강구조학회 논문집
• /
• 제14권1호
• /
• pp.1-12
• /
• 2002

복합재료 적층판의 보다 정확한 해석결과를 얻기 위해서는 종방향 전단변형, 종방향 수직 변형율/응력에 의한 효과와 두께방향 좌표에 관한 면내변위의 비선형 변화등이 고려되어야 한다. 본 연구에서는 개선된 고차이론을 이용하여 복합재료 적층구조물의 처짐 및 고유 진동수를 구한다. 점탄성 해석을 위하여 Quasi-elastic 방법을 사용하였다. 단순지지된 복합재료 적층판 및 샌드위치의 해석결과들은 3차원 탄성해석결과와 다른 이론들에 의한 결과와 비교하였다. 본 연구의 해석결과가 다른 이론들보다 좀 더 정확한 결과를 나타내었다.

• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.391-402
• /
• 2017

In this paper, a new nonlocal trigonometric shear deformation theory is proposed for thermal buckling response of nanosize functionally graded (FG) nano-plates resting on two-parameter elastic foundation under various types of thermal environments. This theory uses for the first time, undetermined integral variables and it contains only four unknowns, that is even less than the first shear deformation theory (FSDT). It is considered that the FG nano-plate is exposed to uniform, linear and sinusoidal temperature rises. Mori-Tanaka model is utilized to define the gradually variation of material properties along the plate thickness. Nonlocal elasticity theory of Eringen is employed to capture the size influences. Through the stationary potential energy the governing equations are derived for a refined nonlocal four-variable shear deformation plate theory and then solved analytically. A variety of examples is proposed to demonstrate the importance of elastic foundation parameters, various temperature fields, nonlocality, material composition, aspect and side-to-thickness ratios on critical stability temperatures of FG nano-plate.

• 대한토목학회논문집
• /
• 제31권5A호
• /
• pp.361-367
• /
• 2011

케이블구조의 기하학적 비선형해석을 위한 탄성포물선 케이블요소를 제시한다. 이를 위하여 먼저 탄성현수선 케이블요소에 대한 적합조건과 접선강도행렬 유도과정을 간략히 요약한다. 이를 토대로 장력이 충분히 도입되어 자중에 의한 처짐 형상이 포물선에 가깝다는 가정 하에서 무응력길이를 포함하는 탄성포물선 케이블요소의 비선형 힘-변형관계식과 접선강도행렬을 유도한다. 또한 현(chord) 방향으로 두 케이블요소의 등가 공칭장력식을 정의한다. 탄성포물선 케이블요소의 수치적인 정확성을 확인하기 위하여, 경사진 케이블을 한 개의 탄성현수선과 탄성포물선 케이블요소로 각각 모델링하여 매개변수 해석을 수행하고 비교, 분석한 결과를 제시한다. 제시된 탄성포물선요소는 충분한 정확도를 가지고 케이블지지 구조물의 초기치해석 및 기하비선형해석에 효과적으로 적용할 수 있을 것으로 판단된다.

• Advances in nano research
• /
• 제9권1호
• /
• pp.33-45
• /
• 2020

Geometrically nonlinear buckling of functionally graded magneto-electro-elastic (FG-MEE) nanoshells with the use of classical shell theory and nonlocal strain gradient theory (NSGT) has been analyzed in present research. Mathematical formulation based on NSGT gives two scale coefficients for simultaneous description of structural stiffness reduction and increment. Functional gradation of material properties is described based on power-law formulation. The nanoshell is under a multi-physical field related to applied voltage, magnetic potential, and mechanical load. Exerting a strong electric voltage, magnetic potential or mechanical load may lead to buckling of nanoshell. Taking into account geometric nonlinearity effects after buckling, the behavior of nanoshell in post-buckling regime can be analyzed. Nonlinear governing equations are reduced to ordinary equations utilizing Galerkin's approach and post-buckling curves are obtained based on an analytical procedure. It will be shown that post-buckling curves are dependent on nonlocal/strain gradient parameters, electric voltage magnitude and sign, magnetic potential magnitude and sign and material gradation exponent.

• Wind and Structures
• /
• 제22권3호
• /
• pp.329-348
• /
• 2016

This work presents a simple hyperbolic shear deformation theory for analysis of functionally graded plates resting on elastic foundation. The proposed model contains fewer number of unknowns and equations of motion than the first-order shear deformation model, but the transverse shear stresses account for a hyperbolic variation and respect the tangential stress-free boundary conditions on the plate boundary surface without introducing shear correction factors. Equations of motion are obtained from Hamilton's principle. The Navier-type analytical solutions for simply-supported plates are compared with the existing solutions to demonstrate the accuracy of the proposed theory.

• Advances in nano research
• /
• 제4권3호
• /
• pp.229-249
• /
• 2016

In this paper, buckling characteristics of nonhomogeneous functionally graded (FG) nanobeams embedded on elastic foundations are investigated based on third order shear deformation (Reddy) without using shear correction factors. Third-order shear deformation beam theory accounts for shear deformation effects by a parabolic variation of all displacements through the thickness, and verifies the stress-free boundary conditions on the top and bottom surfaces of the FG nanobeam. A two parameters elastic foundation including the linear Winkler springs along with the Pasternak shear layer is in contact with beam in deformation, which acts in tension as well as in compression. The material properties of FG nanobeam are supposed to vary gradually along the thickness and are estimated through the power-law and Mori-Tanaka models. The small scale effect is taken into consideration based on nonlocal elasticity theory of Eringen. Nonlocal equations of motion are derived through Hamilton's principle and they are solved applying analytical solution. Comparison between results of the present work and those available in literature shows the accuracy of this method. The obtained results are presented for the buckling analysis of the FG nanobeams such as the effects of foundation parameters, gradient index, nonlocal parameter and slenderness ratio in detail.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.307-318
• /
• 2019

This is the first attempt to consider the nonlinear bending analysis of porous functionally graded (FG) thick annular and circular nanoplates resting on Kerr foundation. The size effects are captured based on modified couple stress theory (MCST). The material properties of the porous FG nanostructure are assumed to vary smoothly through the thickness according to a power law distribution of the volume fraction of the constituent materials. The elastic medium is modeled by Kerr elastic foundation which consists of two spring layers and one shear layer. The governing equations are extracted based on Hamilton's principle and two variables refined plate theory. Utilizing generalized differential quadrature method (GDQM), the nonlinear static behavior of the nanostructure is obtained under different boundary conditions. The effects of various parameters such as material length scale parameter, boundary conditions, and geometrical parameters of the nanoplate, elastic medium constants, porosity and FG index are shown on the nonlinear deflection of the annular and circular nanoplates. The results indicate that with increasing the material length scale parameter, the nonlinear deflection is decreased. In addition, the dimensionless nonlinear deflection of the porous annular nanoplate is diminished with the increase of porosity parameter. It is hoped that the present work may provide a benchmark in the study of nonlinear static behavior of porous nanoplates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.469-472
• /
• 2000

a crack with electrically impermeable surfaces in an electrostrictive material subjected to uniform electric loading is analysed. A strip yield zone model is employed to investigate the effect of electric yielding on stress intensity factor. complete forms of electric fields and elastic fields for the crack are derived by using complex function theory. /the stress intensity factors are obtained based on the strip yield zone model.

• Journal of applied mathematics & informatics
• /
• 제6권3호
• /
• pp.873-884
• /
• 1999

On the basis of the semi-linear material of John invoking the theory of homogenization for heterogeneous media and the theory of invariants for isotropic scalar functions an energy function is built for a transversely-isotropic medium in finite elastic deformation. The ponyting Effect for material in simple shear is reviewed for this case of transversal isotropy. It is shown that this effect is apprehended by the constructed energy function.