• Journal of the Korea Society of Computer and Information
• /
• v.27 no.9
• /
• pp.101-112
• /
• 2022

In this paper, we analyze 5G network slicing and propose an efficient network slice configuration method in 5G mobile networks. Network slicing can be identified and performed based on the network slice instance information in 5G mobile networks. In case of discordance between the UE's network slice instance information and the network's one, the unnecessary signalling overhead occurs, when the UE's PDU Session Establishment request to the network fails. To solve this problem, this paper proposes two efficient network slice configuration methods, the UE-based ENSC(Efficient Network Slice Configuration) method and the Network-based ENSC method. The proposed schemes perform the prompt the configuration and provision of the updated network slice instance information between the UE and network and improve battery and resource efficiency and minimize unnecessary signalling overhead compared to existing methods in 5G mobile networks.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.108-115
• /
• 2019

The activities of managing and controlling the configuration of a system component over its life cycle are critical tasks in developing a high safety system as well as general system development. These configuration management activities should be defined through the management plan at the beginning of the life cycle, and should be performed continuously and systematically until the end of the project after the system or product development is completed. In this study, the configuration management process applied in the development of high safety railway signaling system was introduced and an efficient application proposals of it was proposed. In particular, configuration management through the establishment of a configuration management system based on computer tools is one of the important activities of maintaining the configuration integrity of the system or product.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.8-15
• /
• 2015

Unmanned Aircraft System(UAS) is a huge and complicated system that is composed of UAV, ground control system, datalink system, and mission equipments. We have applied system engineering to development of UAS. Configuration management is very important activity for efficient developments. The Configuration management process comprises four distinct disciplines (Configuration identification, Configuration control, Configuration status accounting, and Configuration audit). This paper explains the configuration management system of UAS development project which ADD executes and introduces several examples of these four disciplines.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.93-102
• /
• 2011

In this paper we describe an efficient and easy to use network monitoring system which can identify network configuration automatically by means of capturing and analyzing the ARP broadcasting packets. After identifying network nodes, it gathers detail information of each node such as NETBIOS name and number of hop counts using ICMP and then shows subnet configuration with graphical method. This monitoring system also has a subset of intrusion detection system that can monitor any port scanning trial. With this automatic network configuration functions, it helps to lessen address keeping track overhead which is crucial for network monitoring so that it provides efficient network management.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.904-907
• /
• 1996

In this paper, we propose an efficient collision-free path planning method of two cooperating robot manipulators grasping a common object rigidly. For given two robots and an object, the procedure is described which constructs the reduced dimensional configuration space by the kinematic analysis of two cooperating robot manipulators. A path planning algorithm without explicit representation of configuration obstacles is also described. The primary steps of the algorithm is as follows. First, we compute a graph which represents the skeleton of the free configuration space. Second, a connection between an initial and a goal configuration to the graph is searched to find a collision-free path.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.64-68
• /
• 2004

Design of manufacturing system is a very complicated and tricky process. Since no efficient method has been known, yet it has been mainly done based on experience and heuristics. Even mostly used simulation approaches can only evaluate the performance of an already configured system, but cannot provide a help to configure or reconfigure a manufacturing system. An efficient way to (re-)configure manufacturing systems might be to use building blocks of a manufacturing system in the similar manner the recent products are configured based on modular principle. In this paper, the concept of a building block and its representation method are described. An example of assembly system configuration is also given.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.67-84
• /
• 1995

Five-axis NC machining is advanced machining technology by which highly geometrically complicated parts can be machined accurately with high machinability. In this paper, we investigate the problems of determining the machinability and part setup orientation for a given surface models. We first develop kinematic model of the five-axis machines based on the axis configuration, then develop algorithms for determining the feasibility of machining by one setup(machinability) and the part orientation for the C,A and A,B type configuration. The machinability is determined by computationally efficient procedure for finding the intersection between the feasible area on the sphere and the numerical map called binary spherical map(BSM), and the part setup is chosen such that the rotational range is minimized among the feasible configurations. The developed algorithms are tested by numerical simulations, convincing they can be readily implemented on the CAD/CAM system as an automated process planner giving the efficient machine type and setup for NC machining.

• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.313-318
• /
• 2006

In this paper, we propose an efficient Care of Address (CoA) configuration scheme for network mobility support in the railroad environment. Mobile routers in a train visit each access router in the fixed order. Such regular movement characteristic of a train enables a current subnet access router to inform the next subnet access router of the mobile routers' interface identifiers before the mobile routers move to the next subnet access router. So, the next subnet access router can make care of addresses for the mobile routers in advance. The numerical results show that the proposed scheme outperforms the stateless scheme with respect to CoA configuration time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.271-275
• /
• 2006

In STP, network performance differs depending on topology configuration. Therefore, we need to configure right topology for the optimal efficiency of networking. This paper suggest the optimal topology configuration for efficient networking between ethernet switchs. It finds out the best topology configuration by calculation mathematical model which uses transmission time between root switch and other switchs in the same domain. And it also analysed performance difference on locations of root switch. Through the performance analysis, we could conclude that placing the root switch in the center is the most efficient.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.274-280
• /
• 2024

The smart factory promotion project is a project that improves the entire management environment system, including the production process, using ICT technology. According to the 2019 Smart Factory Survey and Analysis Research Report of the Ministry of SMEs and Startups, small and medium-sized enterprises that introduced smart factories reported positive effects such as increased productivity, improved quality, and reduced costs on average. On the other hand, the survey results of companies that promoted the project despite positive results showed that there was room for improvement. This study dealt with the contents of the survey conducted on companies by the smart factory promotion agency in 2020 regarding the infrastructure configuration for promoting smart factories. We examined the meaningful contents implied by the data related to the infrastructure configuration. These meaningful survey results can lead to more efficient business promotion in the future when promoting smart factory projects.