• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.255-256
• /
• 2015

The increasing penetration of renewable energy based distributed generation(DG) sources in low-voltage grid feeders has been receiving increased attention. High penetration of renewable energy generation in a distribution system can cause power quality and efficiency problem. In this paper, the operating plan for ESS and the efficiency analysis on RES(Renewable energy source) concentrated distribution system.

• Journal of Distribution Science
• /
• v.15 no.11
• /
• pp.59-72
• /
• 2017

Purpose - This paper evaluated the efficiency performance of the three major maritime transport markets and examined the determinants of the performance. The firms' revenue fluctuates with the changes of the economic cycle; hence it is important for them to set up business strategies to improve efficiencies. A lack of efficiency measurements for shipping firms leads to a significant gap in determining their overall performance. Research design, data, and methodology - Each of DEA scores was adopted for the evaluation and panel regression was used to examine the impact of determinants on the performance. The analysis included 50 shipping firms from three maritime transport markets as follows; 15 firms of container liners, 18 firms of bulk carrier and 17 firms of tanker carriers, and its period was from 2010 to 2016. Results - In the CCR model, container liners were the highest, tanker carriers were the second, and bulk carriers were the lowest in operation efficiency and financial efficiency. By region, operation efficiency and financial efficiency was high in the order of America, Asia, and Europe. Conclusions - This study suggests business strategies for maritime transport companies based on the analytical results of determinants of operational and financial efficiency.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.314-318
• /
• 2012

Purpose: This study was conducted to develop a measurement system for determining photosynthetic photon flux (PPF) distribution and illumination efficiency of LED lamps. Methods: The system was composed of a linear moving sensor part (LMSP), a rotating part to turn the LMSP, a body assembly to support the rotating part, and a motor controller. The average PPF of the LED lamp with natural cooling and water cooling was evaluated using the measurement system. Results: The PPF of LED lamp with water cooling was 3.1-31.7% greater than that with natural cooling. Based on the measured value, PPF on the horizontal surface was predicted. Illumination efficiency of the LED lamp was slightly increased with water cooling by 3.4%, compared with natural cooling. A simulation program using MATLAB was developed to analyze the effects of the vertical distance from lighting sources to growing bed, lamp spacing, and number of LED lamps, on the PPF distribution on the horizontal surface. The uniformity of the PPF distribution of the LED lamps was fairly improved with 15 cm spacing, as compared to the 5 cm spacing. By simulation, PPF of $217.0{\pm}27.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was obtained at the vertical distance of 40 cm from six LED lamps with 12 cm spacing. This simulated PPF was compared to the measured one of $225.9{\pm}25.6{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After continuous lighting of 346 days, the relative PPF of LED lamps with water cooling and natural cooling was decreased by 6.6% and 22.8%, respectively. Conclusions: From these results, it was concluded that the measurement system developed in this study was useful for determining PPF and illumination efficiency of artificial lighting sources including LED lamp.

• Journal of Distribution Science
• /
• v.8 no.4
• /
• pp.35-41
• /
• 2010

Although dictionary definition of standardization is 'to prevent disordered complexity and to make and use rules for reasonable simplification or unification, from a position of shop-floor operations of distribution, it is directly connected to efficiency, that is 'productivity equals cost savings'. This study analyzed influence of standardization of agricultural product packages in hypermarkets on costs in stakeholders of distribution channel such as suppliers, distribution centers and hypermarkets. The research findings demonstrated that it would influence manufacturing costs of suppliers and improve shop productivity of hypermarkets.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.1
• /
• pp.33-44
• /
• 2003

This study was conducted to estimate the design flood by the determination of best fitting order for LH-moments of the annual maximum series at fifteen watersheds. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized Extreme Value (GEV) in the first report of this project. Parameters of GEV distribution and flood flows of return period n years were derived by the methods of L, L1, L2, L3 and L4-moments. Frequency analysis of flood flow data generated by Monte Carlo simulation was performed by the methods of L, L1, L2, L3 and L4-moments using GEV distribution. Relative Root Mean Square Error. (RRMSE), Relative Bias (RBIAS) and Relative Efficiency (RE.) using methods of L, Ll , L2, L3 and L4-moments for GEV distribution were computed and compared with those resulting from Monte Carlo simulation. At almost all of the watersheds, the more the order of LH-moments and the return periods increased, the more RE became, while the less RRMSE and RBIAS became. The Absolute Relative Reduction (ARR) for the design flood was computed. The more the order of LH-moments increased, the less ARR of all applied watershed became It was confirmed that confidence efficiency of estimated design flood was increased as the order of LH-moments increased. Consequently, design floods for the appled watersheds were derived by the methods of L3 and L4-moments among LH-moments in view of high confidence efficiency.

• Asian Journal of Business Environment
• /
• v.8 no.2
• /
• pp.15-22
• /
• 2018

Purpose - It is important to figure out the relationship between tourism carbon emissions and tourism economics for a healthy tourism development. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. Tourist consumption stripping coefficient is used to calculate tourism carbon emissions. SBM-Undesirable model is used to measure the efficiency of tourism economics under the constraint of tourism carbon emissions. Results - The results show that: during the year of 2005-2015, there are obvious differences in totals and intensities of tourism carbon emissions among 27 provinces and cities which can be divided into three areas. There is a high possibility of underestimating the actual efficiency of tourism economics by leaving tourism carbon emissions out of account, and a high inefficiency caused by tourism carbon emissions will lead a low efficiency of tourism economics. Conclusions - The development of tourism should give consideration to both economic and environmental benefits, and reduce the inefficiency caused by tourism carbon emissions to improve efficiency of tourism economics by improving the level of technical efficiency and promoting technological progress.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.4
• /
• pp.358-368
• /
• 2023

The fuel cell market is expected to grow rapidly. Therefore, it is necessary to scale up fuel cells for buildings, power generation, and ships. A multi-stack system can be an effective way to expand the capacity of a fuel cell. Multi-stack fuel cell systems are better than single-stack systems in terms of efficiency, reliability, durability and maintenance. In this research, we developed a residential fuel cell stack and system model that generates electricity using the fuel cell-photovoltaic hybrid system. The efficiency and hydrogen consumption of the fuel cell system were calculated according to the three proposed power distribution methods (equivalent, Daisy-chain, and optimal method). As a result, the optimal power distribution method increases the efficiency of the fuel cell system and reduces hydrogen consumption. The more frequently the multi-stack fuel cell system is exposed to lower power levels, the greater the effectiveness of the optimal power distribution method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.159-167
• /
• 2018

In this paper, we propose an algorithm to optimize energy efficiency in a multi-user decoupled RF energy harvesting network and experiment on the trend of energy efficiency change assuming users' various geographical distribution scenarios. In the RF energy harvesting network where both wireless data transmission and RF energy harvesting are simultaneously performed, the energy efficiency is a key indicator of network performance, and it is necessary to investigate how various factors can affect the energy efficiency. In order to increase energy efficiency effectively, we can confirm that users' distributions are important factors in the RF energy harvesting network from the simulation results.

• Journal of Distribution Science
• /
• v.3 no.2
• /
• pp.57-75
• /
• 2005

By the research seen by examining plan which can improve at least systematization of a distribution sector, reform opening got into stride to Chinese distribution channel structure by improvement of a premodern Chinese circulation system and non-efficiency-structure. The competition means of the China distribution industry, the development direction, and the Chinese distribution channel strategy are received focusing on the 1990s, and it is going to show a way proposal.

• Journal of Distribution Science
• /
• v.18 no.9
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.