• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.63-75
• /
• 2013

Roundabouts have been operated in Europe, America and Australia since the 1970s, and many relevant researches continually was carried out. Though many studies regarding roundabout have been recently conducted in korea, most of them have focused on its operational safety and efficiency. Moreover, roundabout design guideline did not define a clear criteria related to pedestrian in roundabout, but seldom investigate the influences of pedestrian on crosswalk. In this study, we seek ways to operate the pedestrian crosswalk signal on roundabout maximizing their operational effects in exceptional case such as rush hour or intersection near the special facilities. We proved that roundabout signal operation is effective under certain circumstances in according to the number of pedestrian, and suggested the optimal signal timing plan for signalized roundabouts. For pursuing the above, we conducted the simulation test using the VISSIM model. The results show that the operational effectiveness of signalized roundabout was evaluated to be better than non-signalized roundabout in specific pedestrian volume condition. In addition, those results are confirmed using simulation analysis conducted on the real roundabout.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.648-655
• /
• 2012

This research is aimed at suggesting the reasonable guideline for managing tree density of a therapeutic forest to enhance the therapeutic efficiency. To obtain visually preferable tree density for 4 coniferous tree species; Pinus koraiensis, Chamaecyparis obtusa, Pinus densiflora, Larix kaempferi, the simulations of tree density according to the 3 diameter classes are used. 250 people participated in questionnaire and 239 people of them were analyzed. The tree density preferences of 4 tree species are as follows; Pinus koraiensis forest; tree density for trees with Diameter (DBH=D)<25 cm about 816/ha, tree density for trees with 25=D<40 about 400/ha and tree density for trees with 40=D about 277/ha. Chamaecyparis obtusa forest; tree density for trees with D<25 about 625/ha, tree density for trees with 25=D<40 about 625/ha and tree density for trees with 40=D about 400/ha. Pinus densiflora forest; tree density for trees with D<25 about 816/ha, tree density for trees with 25=D<40 about 625/ha and tree density for trees with 40=D about 400/ha. Larix kaempferi forest; tree density for trees with D<25 about 625/ha, tree density for trees with 25=D<40 about 625/ha and tree density for trees with 40=D about 277/ha.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.260-260
• /
• 2011

SWAT is semi-distributed and continuous-time distributed simulation watershed model, which can simulate point and nonpoint source pollutants as well as hydrology and water quality. It was developed to predict the effects of alternative management decisions on water, sediment, and chemical yields with reasonable accuracy. It is able to predict and manage hydrology, sediments, nutrients, and pesticides with Best Management Practices (BMPs) in a watershed. SWAT model also has potential for use in ungauged basins to predict streamflow and baseflow from saturated source area in watersheds. According to various cultivation practices and climate change, SWAT model is available to analyze relative change in hydrology and water quality. In order to establish optimum management of water quality, both monitering and modeling have been conducted actively using SWAT model. As SWAT model is computer program to simulate a lot of natural phenomena, it has limitation to predict and reflect them with on hundred percent accuracy. Thus, it is possible to analyze the effect of BMPs in the watershed where users want to simulate hydrology and water quality only if model accuracy and applicability are assessed first of all and the result of it is well for the study watershed. For assessment of SWAT applicability, most researchers have used $R^2$ and Nash and Sutcliffe Efficiency (NSE). $R^2$ and NSE are likely to show different results according to a warm up period and sometimes its results are very different. There have been hardly any studies of whether warm up period can affect simulation results in SWAT model. In this study, how warm up period has a effect on SWAT results was analyzed and a appropriate warm up period was suggested. Lots of SWAT results were compared after using measured data of Soyanggang-dam watershed and applying various warm up period (0 ~ 10 year(s)). As a result of this study, when there was no warm up period, $R^2$ and NSE were 0.645, 0.602 respectively, when warm up period was 2 years, $R^2$ and NSE were 0.648, 0.632, and when warm up period was 4 years, $R^2$ and NSE were 0.663, 0.652 separately. Through this study, sensitive analysis of warm up period in SWAT model was conducted, and this study could give a guideline able to simulate hydrology and water quality for more accuracy than before as users change a lot of warm up periods as well as any simulation parameters.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.463-472
• /
• 2012

For last decade, the amount of information has been increased rapidly because of the internet and computing technology development, mobile devices and sensors, and social networks like facebook or twitter. People who want to gain important knowledge from database have been frustrated with large database. Many studies for automatic knowledge extracting meaningful knowledge from large database have been fulfilled. In that sense, automatic knowledge extracting with computing technology has been highly significant in information technology field, but still has many challenges to go further. In order to improve the effectives and efficiency of knowledge extracting system, test collection is strongly necessary. In this research, we introduce a test collection for automatic knwoledge extracting. We name the test collection KEEC/KREC(KISTI Entity Extraction Collection/KISTI Relation Extraction Collection) and present the process and guideline for building as well as the features of. The main feature is to tag by experts to guarantee the quality of collection. The experts read documents and tag entities and relation between entities with a tool for tagging. KEEC/KREC is being used for a research to evaluate system performance and will continue to contribute to next researches.

• Clean Technology
• /
• v.19 no.4
• /
• pp.355-369
• /
• 2013

Economic feasibility is one of the most important factors in energy production from regenerative biomass. From the aspect, biogas from anaerobic digestion of wastewater sludge is regarded as the most economical because of its cheap substrate and additional income from the disposal of waste sludge. Sludge hydrolysis has been regarded as the rate limiting step of anaerobic digestion and many sludge pre-treatment technologies have been developed to accelerate anaerobic sludge digestion for enhanced biogas production. Various sludge pre-treatment technologies including biological, thermo hydrolysis, ultrasonic, and mechanical methods have been applied to full-scale systems. Sludge pre-treatment increased the efficiency of anaerobic digestion by enhancing hydrolysis, reducing residual soilds, and increasing biogas production. This paper introduces the characteristics of various sludge pre-treatment technologies and the energy balance and economic feasibility of each technology were compared to prepare a guideline for the selection of feasible pre-treatment technology. It was estimated that thermophilic digestion and thermal hydrolysis were most economical technology followed by Cell rupture$^{TM}$, OpenCEL$^{TM}$, MicroSludge$^{TM}$, and ultrasound. The cost for waste sludge disposal shares the biggest portion in the economic analysis, therefore, water content of the waste sludge was the most important factor to be controlled.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.9-17
• /
• 2011

A urban regeneration project of Korea has been promoted highly attaching to physical reforms, but without fulfilling the basic goal of reactivating city functions through concerning overall areas. Moreover, the general rule and its system of urban regeneration project which would provide roles of public and civilians as well as facilitate cooperative urban regeneration, are currently missing. Thus, social stratum continuously requests a framework act for urban regeneration project called Control Tower, to be a guide to the evidently right path to step up. The research analyzes the current status and problems of urban regeneration projects in Korea to examine the necessity of Control Tower, and to bring up the way to move on for its efficiency presented below: First, the law should be declarative; possess general, prospective influences on laws and systems related to urban regeneration. Second, the nonbinding guideline on a urban regeneration project should be suggested to reflect the conditions by the regions. Last, propulsions should be framed such as administrative principles of strengthening publicity and connection of urban regeneration projects, a committee and fund to promote the former, and a research for problem solution.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.8-15
• /
• 2001

This paper remarks IETF based requirements for IP/UDP/RTP header compression issued in 3GPP2 All IP Ad Hoc Meeting and protocol stacks of the next generation mobile station. All IP Network, for real time application such as Voice over IP (VoIP) multimedia services based on 3GPP2 3G cdma2000. Frames for various protocols expected in the All IP network Mobile Station (MS) are explained with several figures including the bit-for-bit notation of header format based on IETF draft of Robust Header Compression Working Group (ROHC). Especially, this paper includes problems of IS-707 Radio Link Protocol (RLP) for header compression which will be expected to modify in All IP network MS's medium access layer to accommodate real time packet data service[1]. And also, since PPP has also many problems in header compression and mobility aspects in MS protocol stacks for 3G cdma2000 packet data network based on Mobile IP (PN-4286)[2], we introduce the problem of solution for header compression of PPP. Finally. we suggest the guidelines for All IP network MS header compression about expected protocol stacks, radio resource efficiency and performance.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.333-354
• /
• 2011

After the terrorist attack of 9/11 on the USA, the security concern to global trade has been raised. In particular, the USA has actively promoted a series of initiatives and rules such as CSI, 24 hour rule, C-TPAT, and so on in the area of logistics activities, which aimed to better protect the country against the potential terrorist threats. While implementing such schemes called as a multi-layed logistics security strategy, a large number of countries trading with USA are facing with the issues of additional time and costs for inspecting cargos in their logistics facilities. As a result, most countries all over the world have sought a way to minimize the impacts from such strategy. The Korea also is preparing the several security programs operated by various ministries, which are aiming to not only improve the efficiency of trade flows but also to ensure supply chain security. However, many companies are expressing the inefficiency of operating such programs. Thus, this paper analyzed several global supply chain security programs currently adopted by international organizations(ISO, WCO, and IMO) and major countries(USA, EU, and Singapore) and suggested a guideline for developing the national logistics security system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.265-273
• /
• 2000

Purpose : The aim of this study was to evaluate the bone mineral density of iliac and tibial bone which are frequently selected as autogenic bone graft donor sites, and to evaluate the efficiency of this method as a guideline for the selection of bone graft donor site. Materials and Methods : In this study 61 male and 70 female volunteers at Chungbuk National University Hospital were involved between Jan. 1998 to Sept. 1999. We measured bone mineral density of the iliac and the tibial bone using dual energy X-ray absorptiometry. We evaluated the data using the SAS system for Windows and bone mineral density of the lumbar was used for control. Results : Age showed the highest correlation in correlation matrix between physical and bone variables. Height and weight showed lower correlation of linear increment. In man, the change of bone density according to age demonstrated linear decrease irrespective of the lumbar, ilium, and tibia. In woman, the change of bone density according to age showed cubic form, which increased in the third and forth decade. So it had a peak bone mass on about 35 year-old, thereafter, the change of bone density slowly decreased until 50 year-old, but it rapidly decreased after 50 year-old and it slowly decreased again after 65 year-old. Both in all subjects and subject with osteoporosis, the change of bone mineral density according to age showed statistically significant decrease in lumbar and tibia, but ilium was irrespective. Conclusion : In patients of aged or with osteoporosis, ilium demonstrated less tendency of decrease in bone mineral density than tibia. So this preliminary study suggested that ilium seemed better donor site for autogenic bone graft than tibia.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.321-333
• /
• 2019

A primary aspect of low impact development (LID) design that affects performance efficiency, maintenance frequency, and lifespan of the facility is the type of filter media as well as the arrangement or media profile. Several LID guidelines providing media specifications are currently available and numerous studies have been published presenting the effectiveness of these systems. While some results are similar and consistent, some of them still varies and only a few focuses on the effect of filter media type and arrangement on system performance. This creates a certain level of uncertainty when it comes to filter media selection and design. In this review, a synthesis of filter media specifications from several LID design guidelines are presented and relevant results from different laboratory and field studies are highlighted. The LID systems are first classified as infiltration or non-infiltration structures, and vegetated or non-vegetated structures. Typical profiles of the media according to classification are shown including the different layers, materials, and depth. In addition, results from previous studies regarding the effect of filter media characteristics on hydraulic and hydrologic functions as well as pollutant removal are compared. Other considerations such as organic media leaching, clogging, media washing, and handling during construction were also briefly discussed. This review aims to provide a general guideline that can contribute to proper media selection and design for structural LIDs. In addition, it also identifies opportunities for future research.