• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.618-627
• /
• 2005

In this paper, we have compared and analyzed the performance of high amplifier using Doherty technique to improve linearity and efficiency of base station and repeater Power amplifier for WCDMA. This Doherty amplifier implements with 3dB branch line coupler and $90^{\circ}C$ transmission line The phase offset line is designed to maintain the high linearity and efficiency at the low efficiency Period of the power amplifier CW 1-tone experimental results at the WCDMA frequency $2.11{\sim}2.17GHz$ shows that Doherty amplifier which achieves power add efficiency(PAE) of 50% at 6dB back off the point from maximum output power 52.3 dBm, obtains higher efficiency of 13.3% than class AB Finding optimum bias Point after adjusted gate voltage, Doherty amplifier shows that $IMD_3$ improves 4dB.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.260-264
• /
• 2013

This paper proposes a fast enhancement layer coding method to reduce computational complexity for Scalable HEVC (SHVC) which is based on High Efficiency Video Coding (HEVC). The proposed method decreases encoding time by simplifying Rate Distortion Optimization (RDO)for enhancement layers (EL). The simplification is achieved by restricting CU depths based on the correlation of coding unit (CU) depths between adjacent layers and scalability (spatial or quality) of EL. Comparing with the performance of SHM 1.0 software encoder, the proposed method reduces the encoding time by up to 31.5%.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.585-589
• /
• 2018

Consumer demand for high quality image/video services led to growing trend in image quality enhancement study. Therefore, recent years was a period of substantial progress in this research field. Through careful observation of the image quality after processing by image enhancement algorithms, we perceived that the dark region in the image usually suffered loss of contrast to a certain extent. In this paper, the low-light stretch preprocessing algorithm is, hence, proposed to resolve the aforementioned issue. The proposed approach is evaluated qualitatively and quantitatively against the well-known histogram equalization and Photoshop curve adjustment. The evaluation results validate the efficiency and superiority of the low-light stretch over the benchmarking methods. In addition, we also propose the 255MHz-capable hardware implementation to ease the process of incorporating low-light stretch into real-time imaging systems, such as aerial surveillance and monitoring with drones and driving aiding systems.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.47-53
• /
• 2017

In this study, we propose a new control system that effectively utilizes the interaction effect of control force through the connection of stiffness member for seismic performance enhancement of two adjacent structures equipped with active tuned mass damper (ATMD). The efficiency of the proposed control system is verified by comparing with the existing independent control system through the numerical simulations of the 10th- and 12th-story buildings. From the numerical results, it is confirmed that the proposed method can show similar or better control performance even with more economical control capacity than the existing independent control system. Another advantage is that the existing system does not exhibit the adaptive control performance in emergency of failure of one control device, whereas the proposed system can achieve successful adaptive control performance by economically and efficiently utilizing the interacting control effect through the connection member.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2106-2109
• /
• 2008

Nanofluids have been studied as possible alternatives for heat transfer fluids to improve the efficiency of heat exchangers. There are deviations of measured effective thermal conductivities between research-groups, and the mechanisms of the effective thermal conductivity enhancement of nanofluids are not confirmed yet. In this study, the effects of particle shape on the effective thermal conductivity enhancement are discussed and presented as a possible explanation of the deviations. The particle motion effect is found to be negligible for nanofluids of high aspect ratio cylindrical particles, which is believed to be important for nanofluids of spherical particles, while the percolation network formation and contact resistance play dominant roles in determining the effective thermal conductivity.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.38-43
• /
• 2013

We derive the Z-parameters for the two coupled antennas used for wireless power transfer under the assumption that the antennas are canonical minimum scattering antennas. Using the Z-parameter and the maximum power transfer efficiency formula, we determine the maximum power transfer efficiency of wireless power transfer systems. The results showed that the maximum power transfer efficiency increases as the mode number or the radiation efficiency increases. To verify the theory, we fabricate and measure two different power transfer systems: one comprises two antennas generating $TM_{01}$ mode; the other comprises two antennas generating $TM_{02}$ mode. When the distance between the centers of the antennas was 30 cm, the maximum power transfer efficiency of the antennas generating the $TM_{02}$ mode increased by 62 % compared to that of the antennas generating the $TM_{01}$ mode.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.91-95
• /
• 2011

GaN 기반의 LED에서 광 추출 효율을 정량적으로 분석하였다. Ray-Tracing기반의 시뮬레이션을 이용하여 사파이어 기판에 형성된 패턴의 형태, 크기, 깊이, 간격들을 분석하여 최적의 패턴 요소들을 도출하였다. 시뮬레이션의 결과로 최적의 패턴 형태는 반구 형태에서 높은 광 추출 효율을 보였다. 일반적인 패턴이 없는 사파이어 기판을 사용한 LED의 광 추출 효율보다 반구 형태의 패턴을 가진 사파이어 기판에서 약 40% 향상된 광 추출 효율을 보였다.

• 방송공학회논문지
• /
• 제22권5호
• /
• pp.608-617
• /
• 2017

영역 분리에 의한 명암대비 방법들이 제안되어 왔지만 영상의 히스토그램에 따라 과포화 되는 부작용이나 밝기 값 보존과 명암대비 효과의 상반 관계에 대한 개선이 필요하다. 본 논문은 다양한 히스토그램에서도 명암 대비가 개선 되도록 영역 분리 시 각 서브 영역이 가우시안 분포를 갖도록 분리하고 영역별 평활화하는 명암 대비 방법을 제안 한다. 영역 분리는 $L^*a^*b^*$ 컬러 공간에서 K-평균 방법과 기대-최대 방법에 의해 영역맵과 확률맵을 생성하며 영역별 히스토그램 평활화 방법은 영역간 히스토그램 중복 최소를 위해 평균값 이동과 영역 분리에서 생성된 확률맵을 변환 함수에 활용함으로써 영역별 밝기값을 보존 하였다. 실험은 기존의 명암 대비 방법들과 평균 밝기 차이와 평균 엔트로피 값을 이용하여 밝기 변화가 적고 영상의 세부 정보가 표현됨에 의한 명암대비 개선을 보인다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.60-63
• /
• 2012

Enhancement of efficiency and luminance of organic light-emitting diodes was investigated by the introduction of a lithium carbonate ($Li_2CO_3$) electron-injection layer. Electron-injection layer is used in organic light-emitting diodes to inject electrons efficiently between a cathode and an organic layer. A device structure of ITO/TPD (40 nm)/$Alq_3$ (60 nm)/$Li_2CO_3$ (x nm)/Al (100 nm) was manufactured by thermal evaporation, where the thickness of $Li_2CO_3$ layer was varied from 0 to 3.3 nm. Current density-luminance-voltage characteristics of the device were measured and analyzed. When the thickness of $Li_2CO_3$ layer is 0.7 nm, the current efficiency and luminance of the device at 8.0 V are improved by a factor of about 18 and 3,000 compared to the ones without the $Li_2CO_3$ layer, respectively. The enhancement of efficiency and luminance of the device with an insertion of $Li_2CO_3$ electron-injection layer is thought to be due to the lowering of an electron barrier height at the interface region between the cathode and the emissive layer. This is judged from an analysis of current density-voltage characteristics with a Fowler-Nordheim tunneling conduction mechanism model. In a study of lifetime of the device that depends on the thickness of $Li_2CO_3$ layer, the optimum thickness of $Li_2CO_3$ layer was obtained to be 1.1 nm. It is thought that an improvement in the lifetime is due to the prevention of moisture and oxygen by $Li_2CO_3$ layer. Thus, from the efficiency and lifetime of the device, we have obtained the optimum thickness of $Li_2CO_3$ layer to be about 1.0 nm.